Bestsellers

Huawei ATN 910I

Model: ATN 910I

Description: Receive and process FE, GE, and E1 service signals, implement service scheduling, support syste

Part Number:
Quantity:


HUAWEI

Huawei ATN 910I

ATN 910I

The Huawei ATN 910I equipment can receive and process FE, GE, and E1 service signals, implement service scheduling, support system control, and provide system clock processing and auxiliary interface functions

Auxiliary interface function Provides one NM serial port or NM network port to communicate with the NMS so that the NMS can manage and query the equipment.
Provides two interfaces for inputting and outputting the external clock/time to obtain the external clock/time information.
Provides one alarm input/output interface. The interface provides three inputs of alarm digital parameters.
Ethernet interface function FE SFP interfaces support FE optical modules and FE electrical modules.
GE SFP interfaces support GE optical modules and GE electrical modules.
FE/GE SFP interfaces support FE optical modules, FE electrical modules, GE optical modules, and GE electrical modules.
FE electrical interfaces support signals at 10 Mbit/s and 100 Mbit/s.
FE/GE electrical interfaces support signals at 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s.
Electrical interfaces support the PoE function and a maximum output power of 30 W (only on the ATN 910I-P AC).
Supports inloops and outloops.
Supports Layer 2 and Layer 3 working modes.
Supports physical-layer clock synchronization (synchronous Ethernet).
Supports IEEE 1588v2 and IEEE 1588 ACR.
E1 interface function Supports a 75-ohm or 120-ohm impedance value (based on the actual E1 cable)
Supports the E1 and CE1 modes.
Supports inloops and outloops.
Supports the PRBS function in framed or unframed mode of an E1 interface in the receive/transmit direction.
Supports the ATM, TDM, and PPP protocols.
Supports physical-layer clock synchronization.
Switch Capacity 24 G bit/s (12 G bit/s for the upstream traffic and 12G bit/s for the downstream traffic)
Dimensions (mm) 442(W) x 220 (D) x 1U(H)
(17.40 in. x 8.66 in. x 1U),
1U=44.45mm (1.75 in.)
Functions and Features
Auxiliary interface function Provides one NM serial port or NM network port to communicate with the NMS so that the NMS can manage and query the equipment.
Provides two interfaces for inputting and outputting the external clock/time to obtain the external clock/time information.
Provides one alarm input/output interface. The interface provides three inputs of alarm digital parameters.
Ethernet interface function FE SFP interfaces support FE optical modules and FE electrical modules.
GE SFP interfaces support GE optical modules and GE electrical modules.
FE/GE SFP interfaces support FE optical modules, FE electrical modules, GE optical modules, and GE electrical modules.
FE electrical interfaces support signals at 10 Mbit/s and 100 Mbit/s.
FE/GE electrical interfaces support signals at 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s.
Electrical interfaces support the PoE function and a maximum output power of 30 W (only on the ATN 910I-P AC).
Supports inloops and outloops.
Supports Layer 2 and Layer 3 working modes.
Supports physical-layer clock synchronization (synchronous Ethernet).
Supports IEEE 1588v2 and IEEE 1588 ACR.
E1 interface function Supports a 75-ohm or 120-ohm impedance value (based on the actual E1 cable)
Supports the E1 and CE1 modes.
Supports inloops and outloops.
Supports the PRBS function in framed or unframed mode of an E1 interface in the receive/transmit direction.
Supports the ATM, TDM, and PPP protocols.
Supports physical-layer clock synchronization.
Technical Specification
Switch Capacity 24 G bit/s (12 G bit/s for the upstream traffic and 12G bit/s for the downstream traffic)
Mechanical Specifications
Dimensions (mm) 442(W) x 220 (D) x 1U(H)
(17.40 in. x 8.66 in. x 1U),
1U=44.45mm (1.75 in.)

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below:



Key Information of Huawei ATN 910I