Huawei MA 5603T

HUAWEI

Huawei MA 5603T

MA 5603T

The MA 5603T is a Gigabit Passive Optical Netwotk(GPON) integrated optical access products. The MA 5603T equipment can integrate ultra-high aggregation and switching capabilities, supporting 3.2T backplane capacity, 960G switching capacity, 512K MAC addresses, and a maximum of 44-channel 10 GE access or 768 GE ports

High reliability	OLT two-node cluster hot backup, remote Disaster Recovery (DR), hitless upgrade, Quality Of Service (QoS), and end-to-end (E2E) high reliability design
Multiple methods of access	Includes E1 private line access, native TDM (CESoP/SAToP), E-LAN, and non-convergence IPTV user access
Simple evolution	GPON, 10G PON, and 40G PON share a single platform, enabling smooth evolution and supporting ultra-bandwidth access IPv4/IPv6 dual-stack
Design	Automatically powers off any idle boards and intelligent fan speed adjustment, effectively lowers power consumption of idle boards

Access capacity	24 x 10G GPON 96 x GPON 288 x GE
Switch Capacity	960 Gbit/s (Control Board)
Power Supply	–48V DC power input Dual-power supply protection Operating voltage range of –38.4V to –72V
Operating Environment	–40°C to +65°C 5% RH to 95% RH
System performance	Layer 2/Layer 3 line-rate forwarding Static route, RIP, OSPF, and MPLS Clock synchronization schemes: BITS, E1, STM-1, Ethernet clock synchronization, 1588v2, and 1PPS + ToD Maximum split ratio of 1:256 Maximum logical distance between devices: 60 km
Dimensions (mm)	263 (H) x 442 (W) x 283.2 (D)
Ports	Upstream ports: 10 GE optical and GE optical/electrical ports Service ports: GPON optical port, P2P FE optical port, P2P GE optical port, and Ethernet optical port

Functions and Features
High reliability	OLT two-node cluster hot backup, remote Disaster Recovery (DR), hitless upgrade, Quality Of Service (QoS), and end-to-end (E2E) high reliability design
Multiple methods of access	Includes E1 private line access, native TDM (CESoP/SAToP), E-LAN, and non-convergence IPTV user access
Simple evolution	GPON, 10G PON, and 40G PON share a single platform, enabling smooth evolution and supporting ultra-bandwidth access IPv4/IPv6 dual-stack
Design	Automatically powers off any idle boards and intelligent fan speed adjustment, effectively lowers power consumption of idle boards
Technical Specification
Access capacity	24 x 10G GPON 96 x GPON 288 x GE
Switch Capacity	960 Gbit/s (Control Board)
Power Supply	–48V DC power input Dual-power supply protection Operating voltage range of –38.4V to –72V
Operating Environment	–40°C to +65°C 5% RH to 95% RH
System performance	Layer 2/Layer 3 line-rate forwarding Static route, RIP, OSPF, and MPLS Clock synchronization schemes: BITS, E1, STM-1, Ethernet clock synchronization, 1588v2, and 1PPS + ToD Maximum split ratio of 1:256 Maximum logical distance between devices: 60 km
Mechanical Specifications
Dimensions (mm)	263 (H) x 442 (W) x 283.2 (D)
Ports	Upstream ports: 10 GE optical and GE optical/electrical ports Service ports: GPON optical port, P2P FE optical port, P2P GE optical port, and Ethernet optical port

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: