Huawei OSN 6800

HUAWEI

Huawei OSN 6800

OSN 6800

The OSN 6800 is an intelligent integrated OTN/WDM transport platform 

O+E Grooming

360 G ODUk XC

4/9-D ROADM

Transparent access	The OptiX OSN 6800 employs the ITU-T digital wrapper protocol that allows transparent access of various protocols, such as IP/Ethernet, ATM, SDH, and ESCON, and services at different bit rates such as 16 Mbit/s, 5 Gbit/s, 10 Gbit/s, and 40 Gbit/s.
Multi-service transmission	With the multiprotocol wavelength technology, the OptiX OSN 6800 can transmit services of various types (voice, data, storage, and video), in line with the evolution from TDM to Ethernet/data services.
Manageability	Apart from operability, manageability, maintainability, and configurability capabilities, the OptiX OSN 6800 has service management functions as well, including bandwidth management, service convergence, and end-to-end detection.
Flexible grooming	the OptiX OSN 6800 supports the innovative traffic grooming infrastructure, which integrates dynamic optical cross-connections (multi-dimensional ROADM), flexibe

Electric cross- connect	GE/ODU1/2/Any, L2 switch on VLAN, Stack VLAN
Optical cross connect	ROADM: WSS at 40/80 λ, 4 to 9 degrees FOADM : 80 λ MUX/DMUX, 2/4/8 λ DWDM OADM, 1/2/4 λ CWDM OADM
ASON	Traditional WDM networks were statically configured by maintenance engineers on the NMS. Manual intervention is still needed to satisfy certain requests, such as connection set-up or tear-down, which results in a long response time. The ASON allows for automatic establishment/release of switching and connections to achieve quick service provisioning. The OptiX OSN 6800 supports 2M, 1588v2, and synchronous Ethernet clocks, meeting the clock precision requirements of WCDMA, TD-SCDMA, CDMA2000, and LTE/LTE-A.
Service type	STM-1/4/16/64/256 OC-3/12/48/192/768 OTU1/OTU2/OTU3/OTU4 Any service at a rate ranging from 100 Mbit/s to 100 Gbit/s FE/GE/10 GE/40 GE/100 GE ESCON/FICON/FICONExpress/FC100/FC200/FC400/FC1200/HDTV/ DVB-ASI/DVB-SDI/SDI/ FDDI
Capacity	80 DWDM λ /8 CWDMλ
Mount Method	ETSI 300/600 cabinet, 23-inch rack
Protection	Optical line 1+1 protection (1+1 OMSP) Intra-card dual feeding /OLP dual feeding (O-UPSR) ODU1/ODU2 SNCP & tributary SNCP protection ODU1/ODU2 SPRing protection Optical Wavelength Shared Protection (OWSP) GE/ANY service SW SNCP OTU client side 1+1 protection VLAN SNCP BPS, DBPS, DLAG & MS SNCP SCC/XCS/PIU 1+1 protection, secondary power 1:N protection
Network topology	Point-to-point, Chain, Ring, and Mesh
Transport technology	DWDM (G.694.1), CWDM (G.694.2) 2.5G, 5G, 10G, 40G, and 100G line speed OA: EDFA, RAMAN 5,000 km at 10G; 4,000 km at 40G/100G without regeneration
Power Supply	DC: –48/–60V
Dimensions (mm)	400 (W) x 487 (D) x 295 (H)

Functions and Features
Transparent access	The OptiX OSN 6800 employs the ITU-T digital wrapper protocol that allows transparent access of various protocols, such as IP/Ethernet, ATM, SDH, and ESCON, and services at different bit rates such as 16 Mbit/s, 5 Gbit/s, 10 Gbit/s, and 40 Gbit/s.
Multi-service transmission	With the multiprotocol wavelength technology, the OptiX OSN 6800 can transmit services of various types (voice, data, storage, and video), in line with the evolution from TDM to Ethernet/data services.
Manageability	Apart from operability, manageability, maintainability, and configurability capabilities, the OptiX OSN 6800 has service management functions as well, including bandwidth management, service convergence, and end-to-end detection.
Flexible grooming	the OptiX OSN 6800 supports the innovative traffic grooming infrastructure, which integrates dynamic optical cross-connections (multi-dimensional ROADM), flexibe
Technical Specification
Electric cross- connect	GE/ODU1/2/Any, L2 switch on VLAN, Stack VLAN
Optical cross connect	ROADM: WSS at 40/80 λ, 4 to 9 degrees FOADM : 80 λ MUX/DMUX, 2/4/8 λ DWDM OADM, 1/2/4 λ CWDM OADM
ASON	Traditional WDM networks were statically configured by maintenance engineers on the NMS. Manual intervention is still needed to satisfy certain requests, such as connection set-up or tear-down, which results in a long response time. The ASON allows for automatic establishment/release of switching and connections to achieve quick service provisioning. The OptiX OSN 6800 supports 2M, 1588v2, and synchronous Ethernet clocks, meeting the clock precision requirements of WCDMA, TD-SCDMA, CDMA2000, and LTE/LTE-A.
Service type	STM-1/4/16/64/256 OC-3/12/48/192/768 OTU1/OTU2/OTU3/OTU4 Any service at a rate ranging from 100 Mbit/s to 100 Gbit/s FE/GE/10 GE/40 GE/100 GE ESCON/FICON/FICONExpress/FC100/FC200/FC400/FC1200/HDTV/ DVB-ASI/DVB-SDI/SDI/ FDDI
Capacity	80 DWDM λ /8 CWDMλ
Mount Method	ETSI 300/600 cabinet, 23-inch rack
Protection	Optical line 1+1 protection (1+1 OMSP) Intra-card dual feeding /OLP dual feeding (O-UPSR) ODU1/ODU2 SNCP & tributary SNCP protection ODU1/ODU2 SPRing protection Optical Wavelength Shared Protection (OWSP) GE/ANY service SW SNCP OTU client side 1+1 protection VLAN SNCP BPS, DBPS, DLAG & MS SNCP SCC/XCS/PIU 1+1 protection, secondary power 1:N protection
Network topology	Point-to-point, Chain, Ring, and Mesh
Transport technology	DWDM (G.694.1), CWDM (G.694.2) 2.5G, 5G, 10G, 40G, and 100G line speed OA: EDFA, RAMAN 5,000 km at 10G; 4,000 km at 40G/100G without regeneration
Power Supply	DC: –48/–60V
Mechanical Specifications
Dimensions (mm)	400 (W) x 487 (D) x 295 (H)

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: