Bestsellers

SSN1EAS2

Brand: Huawei
Model: SSN1EAS210, EAS2

Description: 2-port 10G Ethernet swtiching processing board

Part Number: 03051791
Quantity:


HUAWEI

SSN1EAS2

SSN1EAS210, EAS2

The SSN1EAS2 is a 10G Ethernet switching board, The SSN1EAS2 can be used on Optix OSN 3500, OSN 7500 equipment to access Ethernet services, manage bandwidths, and realize Layer 2 switching of Ethernet services

10GBASE-LR/LW(10km)

Basic Functions Accesses 2x10 GE Ethernet services.
Supports point-to-multipoint convergence services
Alarms and Performance Events Provides various alarm and performance events, which facilitates the management and maintenance of the equipment
Protection Schemes Supports the following protection schemes at the Ethernet service layer: STP/RSTP, LCASl LPT, l LAG, DLAG
Supports the P2P LPT and P2MP LPT.
MPLS: Does not support the MPLS.
LACAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
RSTP: Supports the broadcast packet suppression and RSTP, which comply with IEEE 802.1w.
Maintenance Features ETH-OAM: Supports CC for the multicast service, LB test for the unicast service, and LT test. The ETH-OAM function complies with IEEE 802.1ag.
Test frames: Supports test frames in ETH and GFP bearer modes.
Format of service frames Supports Ethernet II, IEEE 802.3, and IEEE 802.1qTAG formats.
Supports the frame with a length ranging from 64 bytes to 9600 bytes.
Supports the Jumbo frame with a length less than 9600 bytes.
Maximum uplink bandwidth 10 Gbit/s
The EAS2 can adapt to the bandwidth of the slot.
VCTRUNKs 24
Mapping granularities Supports the following adjacent concatenation granularities: VC4-Xv(X≤8), VC3-Xv (X≤24), and VC4-4c.
Encapsulation format Supports the GFP-F protocol, which meets ITU-T G.7041.
Ethernet performance monitoring Supports the Ethernet performance monitoring at the port level.
Supports the query of the rate of a port.
Bound bandwidth 64xVC-4, or 192xVC-3
Flow control function Supports the port-based flow control function that complies with IEEE 802.3x.
Loopback function Supports inloops on Ethernet ports (at the PHY or MAC layer).
Interface function Provides interfaces on the front panel.
Service Categories EPL services: Supports the PORT-based transparent transmission.
EVPL service: Supports EVPL services based on VCTRUNK+VLAN.
Supports QinQ-based EVPL services. Supports a maximum of 2048 links.
EPLAN service: Supports the creation, deletion, and query of the VB. The maximum number of supported VBs is 1.
Supports the blacklist that can contain 512 records and also the static MAC address table that can contain 512 records.
Supports the setting and query of the aging time of the MAC address
Supports the configuration of static MAC routes.
EVPLAN service: Supports EVPLAN services that use the stack VLAN encapsulation. Supports data isolation based on VB+VLAN.
Q0S Supports the CAR.
The granularity is 64kbit/s.
IGMP snooping Supports the enabling of the IGMP snooping protocol. Supports a maximum of 1024 multicast groups.
Supports the query of the enabling status of the IGMP snooping protocol.
Supports the setting and query of the IGMP snooping protocol parameters.
Supports a maximum of 1024 static multicast groups.
Processing capability 2x10GE signals
interface Specification The optical interfaces are 10GBASE-LR and 10GBASE-LW Ethernet optical interfaces, which comply with IEEE 802.3ae.
MTU Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Link aggregation Supports manual link aggregation and static link aggregation for Ethernet links and VCTRUNKs.
Inter-board link aggregation Supports inter-board link aggregation.
Board Name SSN1EAS2
Nominal bit rate 10.3125 Gbit/s or 9.953 Gbit/s
Optical Interface Type 10GBASE-LR/LW(10km)
Fiber Type Single-mode LC
Wavelength (nm) 1290 to 1330
Receiver Sensitivity (dBm) -11
Minimum Extinction Ratio (dB) 6
Maximum mean launched power (dBm) -1
Minimum mean launched power (dBm) -6
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.2
Volume weight (kg) 3
Functions and Features
Basic Functions Accesses 2x10 GE Ethernet services.
Supports point-to-multipoint convergence services
Alarms and Performance Events Provides various alarm and performance events, which facilitates the management and maintenance of the equipment
Protection Schemes Supports the following protection schemes at the Ethernet service layer: STP/RSTP, LCASl LPT, l LAG, DLAG
Supports the P2P LPT and P2MP LPT.
MPLS: Does not support the MPLS.
LACAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
RSTP: Supports the broadcast packet suppression and RSTP, which comply with IEEE 802.1w.
Maintenance Features ETH-OAM: Supports CC for the multicast service, LB test for the unicast service, and LT test. The ETH-OAM function complies with IEEE 802.1ag.
Test frames: Supports test frames in ETH and GFP bearer modes.
Format of service frames Supports Ethernet II, IEEE 802.3, and IEEE 802.1qTAG formats.
Supports the frame with a length ranging from 64 bytes to 9600 bytes.
Supports the Jumbo frame with a length less than 9600 bytes.
Maximum uplink bandwidth 10 Gbit/s
The EAS2 can adapt to the bandwidth of the slot.
VCTRUNKs 24
Mapping granularities Supports the following adjacent concatenation granularities: VC4-Xv(X≤8), VC3-Xv (X≤24), and VC4-4c.
Encapsulation format Supports the GFP-F protocol, which meets ITU-T G.7041.
Ethernet performance monitoring Supports the Ethernet performance monitoring at the port level.
Supports the query of the rate of a port.
Bound bandwidth 64xVC-4, or 192xVC-3
Flow control function Supports the port-based flow control function that complies with IEEE 802.3x.
Loopback function Supports inloops on Ethernet ports (at the PHY or MAC layer).
Interface function Provides interfaces on the front panel.
Service Categories EPL services: Supports the PORT-based transparent transmission.
EVPL service: Supports EVPL services based on VCTRUNK+VLAN.
Supports QinQ-based EVPL services. Supports a maximum of 2048 links.
EPLAN service: Supports the creation, deletion, and query of the VB. The maximum number of supported VBs is 1.
Supports the blacklist that can contain 512 records and also the static MAC address table that can contain 512 records.
Supports the setting and query of the aging time of the MAC address
Supports the configuration of static MAC routes.
EVPLAN service: Supports EVPLAN services that use the stack VLAN encapsulation. Supports data isolation based on VB+VLAN.
Q0S Supports the CAR.
The granularity is 64kbit/s.
IGMP snooping Supports the enabling of the IGMP snooping protocol. Supports a maximum of 1024 multicast groups.
Supports the query of the enabling status of the IGMP snooping protocol.
Supports the setting and query of the IGMP snooping protocol parameters.
Supports a maximum of 1024 static multicast groups.
Processing capability 2x10GE signals
interface Specification The optical interfaces are 10GBASE-LR and 10GBASE-LW Ethernet optical interfaces, which comply with IEEE 802.3ae.
MTU Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Link aggregation Supports manual link aggregation and static link aggregation for Ethernet links and VCTRUNKs.
Inter-board link aggregation Supports inter-board link aggregation.
Technical Specification
Board Name SSN1EAS2
Nominal bit rate 10.3125 Gbit/s or 9.953 Gbit/s
Optical Interface Type 10GBASE-LR/LW(10km)
Fiber Type Single-mode LC
Wavelength (nm) 1290 to 1330
Receiver Sensitivity (dBm) -11
Minimum Extinction Ratio (dB) 6
Maximum mean launched power (dBm) -1
Minimum mean launched power (dBm) -6
Mechanical Specifications
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.2
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: