Bestsellers

SSN3EGS210

Brand: Huawei
Model: SSND00EGS213

Description: 2-port Gigabit Ethernet Switching Processing Board

Part Number: 03052339
Quantity:


HUAWEI

SSN3EGS210

SSND00EGS213

The SSN3EGS210 is a GE service processing board, The SSN3EGS210 can be used on OSN 1500B, OSN 2500, OSN 3500, OSN 7500 equipment to transmit and receive Ethernet services, manage bandwidths, and realize Layer 2 switching of Ethernet services

1000BASE-SX (0.5 km)

Basic Functions Processes 2xGE services.
Alarms and Performance Events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment
Protection Schemes Not supports TPS, BPS, PPS, DLAG and MSTP
LCAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: The N2EGS2 supports the P2P LPT. The N3EGS2 supports the P2P LPT and P2MP LPT.
STP/RSTP: Supports the broadcast packet suppression function and RSTP that comply with IEEE 802.1w.
Maintenance Features ETH-OAM: The N2EGS2 does not support the ETH-OAM function.
The N3EGS2 supports CC for the multicast service, LB test for the unicast service, LT test, LD, auto-negotiation, fault diagnosis, and link performance detection. The ETH-OAM function complies with IEEE 802.1ag and IEEE 802.3ah.
Test frame: The N2EGS2 supports test frames in Ethernet bearer mode, whereas the N3EGS2 supports test frames in Ethernet/GFP bearer mode.
Response to ping: Supports the setting and query of the board IP address (supported by the N3EGS2 only).
Port mirroring: The N3EGS2 supports ingress mirroring.
Ethernet performance monitoring (RMON): Supports Ethernet performance monitoring at the port level.
VCTRUNKs Number of supported VCTRUNKs: 48
Configuration principles are as follows:
In the case of the N2EGS2, VCTRUNK 1–VCTRUNK 12 can be bound with VC-4s numbered 1–4 only, VCTRUNK13–VCTRUNK 24 can be bound with VC-4s numbered 5–8 only, VCTRUNK 25–VCTRUNK 36 can be bound with VC-4s numbered 9–12 only, and VCTRUNK 37–VCTRUNK 48 can be bound with VC-4s numbered 13–16 only.
In the case of the N3EGS2, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s. VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
A VC-4 cannot be bound with VC-3 and VC-12 paths at the same time.
NOTE
When an SSND00EGS211 board works with a CXL board, only the first 24 VCTRUNKs can be used.
Clock Synchronization Not supports Synchronous Ethernet and IEEE 1588v2
Interface Characteristics Working modes: 1000M full-duplex
Supports Auto-negotiation mode and Non-autonegotiation mode, Supports Query/Setting of port status,Query of interface types and RMON measurement and Hot optical module swapping
No Supports Setting of optical power thresholds
Service Categories EPL service: Supports the PORT-based transparent transmission.
EVPL service: Supports
PORT+VLAN-based EVPL services that use the frame encapsulation formats of MartinioE and stack VLAN.
EPLAN service: Supports the P2MP converging service that is based on Layer 2.
Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 2K records and also the static MAC address table that can contain 2K records. The sum of the number of records in the blacklist and the number of addresses in the static MAC address table must not exceed 2K. The blacklist function of the N3EGS2 supports verification of destination MAC addresses only.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 16K. The aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports the creation, deletion, and query of the VB. The maximum number of supported VBs is 2. The maximum number of logical ports for each VB is 30.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
EVPLAN service: Supports EVPLAN virtual bridges. Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4096 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge.
Service Specifications Formats of Ethernet data frames: Supports IEEE 802.3, Ethernet II, IEEE 802.1 q/p
Maximum frame length: Supports the frame with a length ranging from 64 bytes to 9600 bytes.
Supports the Jumbo frame with a length less than 9600 bytes.
MTU: Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Bound bandwidth: 48xVC-3, or 252xVC-12 + 36xVC-3
Mapping granularities: VC-12, VC-3, VC-12-Xv (X ≤ 63), VC-3-Xv (X ≤ 24).
Supports MPLS technology and GFP-F
Supports 4k VLANs. The VLAN technology complies with IEEE 802.1q/p.
The maximum uplink bandwidth is 2.5 Gbit/s. The EGS2 can adapt to the bandwidth of the slot.
In the case of the N3EGS2, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s.
VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
A VC-4 cannot be bound with VC-3 and VC-12 paths at the same time.
NOTE When an SSND00EGS211 board works with a CXL board, only the first 24 VCTRUNKs can be used.
Not supports TPS, BPS, PPS, DLAG and MSTP
Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: The N2EGS2 supports the P2P LPT.
The N3EGS2 supports the P2P LPT and P2MP LPT.
STP/RSTP: Supports the broadcast packet suppression function and RSTP that comply with IEEE 802.1w.
Q0S Supports the CAR. The granularity is 64 kbit/s.
Supports the flow classification based on PORT, PORT+VLAN ID, or PORT+VLAN ID+VLAN PRI.
The N3EGS2 supports the traffic shaping function.
The N3EGS2 supports the flow classification based on PORT+DSCP or PORT+ToS.
IGMP snooping Supports the IGMP snooping function. In addition, the N3EGS2 supports the IGMP snooping fast-leave function, HUB/SPOKE, unknown multicast packet discarding function, and static multicast function.
NOTE
The N3EGS2 supports the IGMP snooping fast-leave function when it substitutes for the N2EGS2 through the board version replacement function.
Traffic Control Supports the port-based traffic control function that complies with IEEE 802.3x.
Traffic Monitoring The N3EGS2 supports port-based and VCTRUNK-based traffic monitoring.
Port type Supports the 1000BASE-SX/LX/ZX/VX Ethernet optical interfaces. The optical interfaces support the auto-negotiation function in compliance with IEEE 802.3z. The optical interfaces use the SFP optical module and support hot swapping. When the multi-mode optical fiber is used, the maximum transmission distance is 550 m. When the single-mode optical fiber is used, the maximum transmission distance is 10 km. The optical modules that can meet different requirements for the transmission distance such as 40 km and 80 km can also be used.
The N3EGS2 also supports the 1000BASE-T RJ-45 Ethernet electrical interface. The electrical interface supports the auto-negotiation function. The negotiated rate can be 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. The N3EGS2 uses the SFP electrical interface and supports hot swapping. The maximum transmission distance is 100 m.
Board Name SSN3EGS210
Fiber Type Multi-mode LC
Wavelength (nm) 770 to 860
Optical Power (dBm) -9.5 to -2.5
Receiver Sensitivity (dBm) -17
Minimum Overload (dBm) 0
Minimum Extinction Ratio (dB) 9
Maximum -20 dB Spectral Width (nm) -
Minimum Side Mode Suppression Ratio (dB) -
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.0
Volume weight (kg) 3
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">2-port Gigabit Ethernet Switching Processing Board</span></span></p>
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">2-port Gigabit Ethernet Switching Processing Board</span></span></p>
Functions and Features
Basic Functions Processes 2xGE services.
Alarms and Performance Events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment
Protection Schemes Not supports TPS, BPS, PPS, DLAG and MSTP
LCAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: The N2EGS2 supports the P2P LPT. The N3EGS2 supports the P2P LPT and P2MP LPT.
STP/RSTP: Supports the broadcast packet suppression function and RSTP that comply with IEEE 802.1w.
Maintenance Features ETH-OAM: The N2EGS2 does not support the ETH-OAM function.
The N3EGS2 supports CC for the multicast service, LB test for the unicast service, LT test, LD, auto-negotiation, fault diagnosis, and link performance detection. The ETH-OAM function complies with IEEE 802.1ag and IEEE 802.3ah.
Test frame: The N2EGS2 supports test frames in Ethernet bearer mode, whereas the N3EGS2 supports test frames in Ethernet/GFP bearer mode.
Response to ping: Supports the setting and query of the board IP address (supported by the N3EGS2 only).
Port mirroring: The N3EGS2 supports ingress mirroring.
Ethernet performance monitoring (RMON): Supports Ethernet performance monitoring at the port level.
VCTRUNKs Number of supported VCTRUNKs: 48
Configuration principles are as follows:
In the case of the N2EGS2, VCTRUNK 1–VCTRUNK 12 can be bound with VC-4s numbered 1–4 only, VCTRUNK13–VCTRUNK 24 can be bound with VC-4s numbered 5–8 only, VCTRUNK 25–VCTRUNK 36 can be bound with VC-4s numbered 9–12 only, and VCTRUNK 37–VCTRUNK 48 can be bound with VC-4s numbered 13–16 only.
In the case of the N3EGS2, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s. VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
A VC-4 cannot be bound with VC-3 and VC-12 paths at the same time.
NOTE
When an SSND00EGS211 board works with a CXL board, only the first 24 VCTRUNKs can be used.
Clock Synchronization Not supports Synchronous Ethernet and IEEE 1588v2
Interface Characteristics Working modes: 1000M full-duplex
Supports Auto-negotiation mode and Non-autonegotiation mode, Supports Query/Setting of port status,Query of interface types and RMON measurement and Hot optical module swapping
No Supports Setting of optical power thresholds
Service Categories EPL service: Supports the PORT-based transparent transmission.
EVPL service: Supports
PORT+VLAN-based EVPL services that use the frame encapsulation formats of MartinioE and stack VLAN.
EPLAN service: Supports the P2MP converging service that is based on Layer 2.
Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 2K records and also the static MAC address table that can contain 2K records. The sum of the number of records in the blacklist and the number of addresses in the static MAC address table must not exceed 2K. The blacklist function of the N3EGS2 supports verification of destination MAC addresses only.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 16K. The aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports the creation, deletion, and query of the VB. The maximum number of supported VBs is 2. The maximum number of logical ports for each VB is 30.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
EVPLAN service: Supports EVPLAN virtual bridges. Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4096 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge.
Service Specifications Formats of Ethernet data frames: Supports IEEE 802.3, Ethernet II, IEEE 802.1 q/p
Maximum frame length: Supports the frame with a length ranging from 64 bytes to 9600 bytes.
Supports the Jumbo frame with a length less than 9600 bytes.
MTU: Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Bound bandwidth: 48xVC-3, or 252xVC-12 + 36xVC-3
Mapping granularities: VC-12, VC-3, VC-12-Xv (X ≤ 63), VC-3-Xv (X ≤ 24).
Supports MPLS technology and GFP-F
Supports 4k VLANs. The VLAN technology complies with IEEE 802.1q/p.
The maximum uplink bandwidth is 2.5 Gbit/s. The EGS2 can adapt to the bandwidth of the slot.
In the case of the N3EGS2, there is no requirement regarding VCTRUNK binding. One VCTRUNK can be bound with up to 24 VC-3s.
VC-4s numbered 4, 8, 12, and 16 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
A VC-4 cannot be bound with VC-3 and VC-12 paths at the same time.
NOTE When an SSND00EGS211 board works with a CXL board, only the first 24 VCTRUNKs can be used.
Not supports TPS, BPS, PPS, DLAG and MSTP
Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: The N2EGS2 supports the P2P LPT.
The N3EGS2 supports the P2P LPT and P2MP LPT.
STP/RSTP: Supports the broadcast packet suppression function and RSTP that comply with IEEE 802.1w.
Q0S Supports the CAR. The granularity is 64 kbit/s.
Supports the flow classification based on PORT, PORT+VLAN ID, or PORT+VLAN ID+VLAN PRI.
The N3EGS2 supports the traffic shaping function.
The N3EGS2 supports the flow classification based on PORT+DSCP or PORT+ToS.
IGMP snooping Supports the IGMP snooping function. In addition, the N3EGS2 supports the IGMP snooping fast-leave function, HUB/SPOKE, unknown multicast packet discarding function, and static multicast function.
NOTE
The N3EGS2 supports the IGMP snooping fast-leave function when it substitutes for the N2EGS2 through the board version replacement function.
Traffic Control Supports the port-based traffic control function that complies with IEEE 802.3x.
Traffic Monitoring The N3EGS2 supports port-based and VCTRUNK-based traffic monitoring.
Port type Supports the 1000BASE-SX/LX/ZX/VX Ethernet optical interfaces. The optical interfaces support the auto-negotiation function in compliance with IEEE 802.3z. The optical interfaces use the SFP optical module and support hot swapping. When the multi-mode optical fiber is used, the maximum transmission distance is 550 m. When the single-mode optical fiber is used, the maximum transmission distance is 10 km. The optical modules that can meet different requirements for the transmission distance such as 40 km and 80 km can also be used.
The N3EGS2 also supports the 1000BASE-T RJ-45 Ethernet electrical interface. The electrical interface supports the auto-negotiation function. The negotiated rate can be 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. The N3EGS2 uses the SFP electrical interface and supports hot swapping. The maximum transmission distance is 100 m.
Technical Specification
Board Name SSN3EGS210
Fiber Type Multi-mode LC
Wavelength (nm) 770 to 860
Optical Power (dBm) -9.5 to -2.5
Receiver Sensitivity (dBm) -17
Minimum Overload (dBm) 0
Minimum Extinction Ratio (dB) 9
Maximum -20 dB Spectral Width (nm) -
Minimum Side Mode Suppression Ratio (dB) -
Mechanical Specifications
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.0
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: