Bestsellers

SSN4EGS410

Brand: Huawei
Model: SSND00EGS411

Description: 4-port Gigabit Ethernet Switching Processing Board

Part Number: 03052347
Quantity:


HUAWEI

SSN4EGS410

SSND00EGS411

The SSN4EGS410 is a GE service processing board, The SSN4EGS410 can be used on OSN 1500B, OSN 2500, OSN 3500, OSN 7500 equipment to transmit and receive Ethernet services, manage bandwidths, and realize Layer 2 switching of Ethernet services

1000BASE-SX (0.5 km)

Basic Functions SSND00EGS411 Receives/Transmits and processes 4xGE services.
Alarms and Performance Events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Protection Schemes Supports BPS, PPS and DLAG
Not supports TPS
LAG: Supports manual link aggregation and static link aggregation.
Supports the load sharing mode and load non-sharing mode.
LCAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: Supports the P2P LPT and the P2MP LPT.
STP/RSTP: Supports the RSTP, which complies with IEEE 802.1w.
MSTP: The N1EGS4 Supports the MSTP.
Maintenance Features ETH-OAM: The N1EGS4/N3EGS4 supports CC and LB test, which comply with IEEE 802.1ag.
The N4EGS4 supports CC, LB test, LT test, and OAM_Ping, which comply with IEEE 802.1ag.
Supports OAM auto-discovery, remote loopback, fault diagnosis, link performance monitoring, and self-loop test, which comply with IEEE 802.3ah.
Test frame: N1EGS4/N3EGS4 supports test frames in GFP bearer mode.
N4EGS4 supports test frames in Ethernet/GFP bearer mode.
Response to ping: Supports the setting and query of the board IP address (supported by the N4EGS4 only).
Port mirroring: The N4EGS4 supports ingress mirroring.
Loopback capability: PHY layer at Ethernet ports: Inloops
MAC layer at Ethernet ports: Not supported
VC-4 level: Not supported
VC-3 level: Not supported
VC-12 level: Not supported
Ethernet performance monitoring (RMON): Supports RMON of the Ethernet performance of Ethernet ports and VCTRUNKs.
VCTRUNKs 64
Configuration principles are as follows:
VC-4s numbered 1-4 and 9-12 of the N3EGS4/N4EGS4 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
Interface function Provides interfaces on the front panel.
Clock Synchronization Synchronous Ethernet: Not supported
IEEE 1588v2: Not supported
Interface Characteristics Working modes: 1000M full-duplex
Traffic control at ports: Suport auto-negotiation mode
Not support non-autonegotiation mode
Query/Setting of port status: Supported
Query of interface types: Supported
RMON measuremen: Supported
Setting of optical power thresholds: not Supported
Hot optical module swapping: Supports hot swapping of SFP optical modules.
Service Categories EPL service: Supports PORT-based transparent transmission.
EVPL service: Supports EVPL services based on PORT+VLAN.
Supports a maximum of 4000 services that are received/transmitted through IP ports.
Supports a maximum of 4000 services that are received/transmitted through VCTRUNKs.
Supports a maximum of 8000 links.
Supports QinQ-based EVPL services.
Supports PORT-based service forwarding.
EPLAN service: Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 512 records and also the static MAC address table that can contain 512 records. The blacklist function supports verification of destination MAC addresses only.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 128K. The aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports the creation, deletion, and query of the VB. The EGS4 supports a maximum of two VBs.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
EVPLAN service: Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4000 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.
Service Specifications Formats of Ethernet data frames: Supports IEEE 802.3
Supports Ethernet II
Supports IEEE 802.1 q/p
Maximum frame length: Supports the frame with a length ranging from 64 bytes to 9216 bytes.
Supports the Jumbo frame with a length less than 9216 bytes.
MTU: Supports the setting of the packet length, which ranges from 1518 bytes to 9216 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Bound bandwidth: N1EGS4: 16xVC-4, or 48xVC-3, or 1008xVC-12
N3EGS4/N4EGS4: 16xVC-4, or 48xVC-3, or 504xVC-12
Mapping granularities: VC-12, VC-3, VC-4, VC-12-Xv (X ≤ 64), VC-3-Xv (X ≤ 24), and VC-4-Xv (X ≤ 8).
Encapsulation formats: support HDLC, LAPS and GFP-F
Not support MPLS technology
VLAN technology: Supports VLAN and QinQ, and supports the addition, deletion, and exchanging of VLAN tags. The function complies with IEEE 802.1q/p.
Supports 4096 S-VLANs (0–4095) and 4096 C-VLANs (0–4095) in the case of QinQ services.
Supports 4095 VLANs (1–4095) in the case of EVPL services.
Maximum uplink bandwidth: 2.5 Gbit/s
Q0S Supports the CAR. The granularity is 64 kbit/s. The N1EGS4 supports 512 rate modes, and the N3EGS4 and N4EGS4 support 60 rate modes.
Supports the flow classification based on PORT, PORT+VLAN, PORT+VLAN+PRI, or PORT+SVLAN.
The N4EGS4 supports the setting of modes and weights for scheduling queues.
IGMP snooping Supports the IGMP snooping function. In addition, the N1EGS4 supports the IGMP snooping fast-leave function, and the N4EGS4 supports the IGMP snooping fast-leave function and unknown multicast packet discarding function.
Traffic Control Supports the port-based traffic control function that complies with IEEE 802.3x.
Traffic Monitoring The N4EGS4 supports port-based and VCTRUNK-based traffic monitoring.
Board Name SSN4EGS410
Optical Interface Type 1000BASE-SX (0.5 km)
Fiber Type Multi-mode LC
Wavelength (nm) 770 to 860
Optical Power (dBm) -9.5 to -2.5
Receiver Sensitivity (dBm) -17
Minimum Overload (dBm) 0
Minimum Extinction Ratio (dB) 9
Maximum -20 dB Spectral Width (nm) -
Minimum Side Mode Suppression Ratio (dB) -
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.1
Volume weight (kg) 3
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">4-port Gigabit Ethernet Switching Processing Board</span></span></p>
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">2-port </span></span><span style="color:rgb(63, 36, 45); font-family:tahoma; font-size:14px">Gigabit Ethernet&nbsp;</span><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">&nbsp;transparent&nbsp;transmission&nbsp;board</span></span></p>
Functions and Features
Basic Functions SSND00EGS411 Receives/Transmits and processes 4xGE services.
Alarms and Performance Events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Protection Schemes Supports BPS, PPS and DLAG
Not supports TPS
LAG: Supports manual link aggregation and static link aggregation.
Supports the load sharing mode and load non-sharing mode.
LCAS: Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT: Supports the P2P LPT and the P2MP LPT.
STP/RSTP: Supports the RSTP, which complies with IEEE 802.1w.
MSTP: The N1EGS4 Supports the MSTP.
Maintenance Features ETH-OAM: The N1EGS4/N3EGS4 supports CC and LB test, which comply with IEEE 802.1ag.
The N4EGS4 supports CC, LB test, LT test, and OAM_Ping, which comply with IEEE 802.1ag.
Supports OAM auto-discovery, remote loopback, fault diagnosis, link performance monitoring, and self-loop test, which comply with IEEE 802.3ah.
Test frame: N1EGS4/N3EGS4 supports test frames in GFP bearer mode.
N4EGS4 supports test frames in Ethernet/GFP bearer mode.
Response to ping: Supports the setting and query of the board IP address (supported by the N4EGS4 only).
Port mirroring: The N4EGS4 supports ingress mirroring.
Loopback capability: PHY layer at Ethernet ports: Inloops
MAC layer at Ethernet ports: Not supported
VC-4 level: Not supported
VC-3 level: Not supported
VC-12 level: Not supported
Ethernet performance monitoring (RMON): Supports RMON of the Ethernet performance of Ethernet ports and VCTRUNKs.
VCTRUNKs 64
Configuration principles are as follows:
VC-4s numbered 1-4 and 9-12 of the N3EGS4/N4EGS4 support the binding of VC-3 and VC-12 paths. The other VC-4s support the binding of VC-3 paths only.
Interface function Provides interfaces on the front panel.
Clock Synchronization Synchronous Ethernet: Not supported
IEEE 1588v2: Not supported
Interface Characteristics Working modes: 1000M full-duplex
Traffic control at ports: Suport auto-negotiation mode
Not support non-autonegotiation mode
Query/Setting of port status: Supported
Query of interface types: Supported
RMON measuremen: Supported
Setting of optical power thresholds: not Supported
Hot optical module swapping: Supports hot swapping of SFP optical modules.
Service Categories EPL service: Supports PORT-based transparent transmission.
EVPL service: Supports EVPL services based on PORT+VLAN.
Supports a maximum of 4000 services that are received/transmitted through IP ports.
Supports a maximum of 4000 services that are received/transmitted through VCTRUNKs.
Supports a maximum of 8000 links.
Supports QinQ-based EVPL services.
Supports PORT-based service forwarding.
EPLAN service: Supports the Layer 2 forwarding function.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 512 records and also the static MAC address table that can contain 512 records. The blacklist function supports verification of destination MAC addresses only.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 128K. The aging time of the MAC address can be set and queried.
Supports the configuration of the static MAC route.
Supports the creation, deletion, and query of the VB. The EGS4 supports a maximum of two VBs.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
EVPLAN service: Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4000 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.
Service Specifications Formats of Ethernet data frames: Supports IEEE 802.3
Supports Ethernet II
Supports IEEE 802.1 q/p
Maximum frame length: Supports the frame with a length ranging from 64 bytes to 9216 bytes.
Supports the Jumbo frame with a length less than 9216 bytes.
MTU: Supports the setting of the packet length, which ranges from 1518 bytes to 9216 bytes. After the setting becomes valid, the length of the packets that enter the IP ports is restricted by the pre-set MTU.
Bound bandwidth: N1EGS4: 16xVC-4, or 48xVC-3, or 1008xVC-12
N3EGS4/N4EGS4: 16xVC-4, or 48xVC-3, or 504xVC-12
Mapping granularities: VC-12, VC-3, VC-4, VC-12-Xv (X ≤ 64), VC-3-Xv (X ≤ 24), and VC-4-Xv (X ≤ 8).
Encapsulation formats: support HDLC, LAPS and GFP-F
Not support MPLS technology
VLAN technology: Supports VLAN and QinQ, and supports the addition, deletion, and exchanging of VLAN tags. The function complies with IEEE 802.1q/p.
Supports 4096 S-VLANs (0–4095) and 4096 C-VLANs (0–4095) in the case of QinQ services.
Supports 4095 VLANs (1–4095) in the case of EVPL services.
Maximum uplink bandwidth: 2.5 Gbit/s
Q0S Supports the CAR. The granularity is 64 kbit/s. The N1EGS4 supports 512 rate modes, and the N3EGS4 and N4EGS4 support 60 rate modes.
Supports the flow classification based on PORT, PORT+VLAN, PORT+VLAN+PRI, or PORT+SVLAN.
The N4EGS4 supports the setting of modes and weights for scheduling queues.
IGMP snooping Supports the IGMP snooping function. In addition, the N1EGS4 supports the IGMP snooping fast-leave function, and the N4EGS4 supports the IGMP snooping fast-leave function and unknown multicast packet discarding function.
Traffic Control Supports the port-based traffic control function that complies with IEEE 802.3x.
Traffic Monitoring The N4EGS4 supports port-based and VCTRUNK-based traffic monitoring.
Technical Specification
Board Name SSN4EGS410
Optical Interface Type 1000BASE-SX (0.5 km)
Fiber Type Multi-mode LC
Wavelength (nm) 770 to 860
Optical Power (dBm) -9.5 to -2.5
Receiver Sensitivity (dBm) -17
Minimum Overload (dBm) 0
Minimum Extinction Ratio (dB) 9
Maximum -20 dB Spectral Width (nm) -
Minimum Side Mode Suppression Ratio (dB) -
Mechanical Specifications
Dimensions (mm) 25.4 (W) x 220 (D) x 254.1 (H)
Net Weight (kg) 1.1
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: