Bestsellers

TN53TDX01

Brand: Huawei
Model: TDX

Description: 2*10G Tributary Service Processing Board

Part Number: 03021CYJ
Quantity:


HUAWEI

TN53TDX01

TDX

The TN53TDX01 is a tributary service processing board. The TN53TDX01 can be used on the OSN 6800, OSN 8800 equipment to implements conversion between two channels of 10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e/FC800/FC1200 optical signals and eight channels of ODU1 virtual concatenation electrical signals or two ODU2/ODU2e/ODUflex electrical signals using cross-connections.

XFP-1310-STM64/FC10G/10GbE/OTU2-10km
 

Basic Functions TDX converts signals as follows:
TN53TDX: 2x10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e/FC800/FC1200<->2xODU2/ODU2e, 2xFC800<->2xODUflex
Client-side service type STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s
10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
OTU2: OTN service at a rate of 10.71 Gbit/s
OTU2e: OTN service at a rate of 11.1 Gbit/s
FC800: SAN service at a rate of 8.5 Gbit/s
FC1200: SAN service at a rate of 10.51 Gbit/s
NOTE
Only the TN52TDX/TN53TDX supports OTU2 and OTU2e services.
Only the TN53TDX board supports FC800 and FC1200 services.
The processing of the 10GE WAN service and the STM-64 service is the same. Therefore, For TN11TDX/TN12TDX/TN52TDX board, when the 10GE WAN service is transmitted, you can configure it as the STM-64 service on the U2000.
OTN function Supports the OTN frame format and overhead processing by referring to the ITU-T G.709. The mapping process is compliant with ITU-TG.709 and G.Sup43.
Supports PM functions for ODU2.
ALS function Supports the ALS function on the client side.
ESC function Supported by the TN52TDX/TN53TDX when the client-side service type is OTU2 or OTU2e.
Latency measurement The TN53TDX board supports latency measurement. The bidirectional latency at the ODUk layer between two tributary boards supporting the latency measurement function can be measured, and the latency data is displayed on the U2000.
NOTE
This function is not supported when the client-side service type is OTU2/OTU2e.
PRBS function Supports the PRBS function on the client side.
NOTE
The PRBS function on the client side is supported only when the client-side service type is STM-64/OC-192, OTU2 or OTU2e.
LPT function The board supports the LPT function only when the client-side service type is 10GE LAN.
Protection Schemes Supports ODUk SNCP.
Supports client 1+1 protection.
Supports tributary SNCP protection (TN12TDX/TN52TDX/TN53TDX).
NOTE
When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.
NOTE
When the board receives OTN services, SDH/SONET services, and 10GE WAN services the board supports tributary SNCP protection.
Clock function TN53TDX:
When the board receives 10GE LAN services and the port mapping is Bit Transparent Mapping (11.1 G) on its client side, the board can support synchronous Ethernet transparent transmission instead of synchronous Ethernet processing.
When the board receives 10GE LAN services and the port mapping is MAC Transparent Mapping (10.7 G). on its client side, the board can support synchronous Ethernet processing instead of synchronous Ethernet transparent transmission.
Alarms and performance events monitoring Monitors BIP8 bytes (Poisson mode or Bursty mode) to help locate line failures.
Monitors B1 bytes to help locate faults.
Monitors OTN alarms and performance events.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Supports the remote monitoring (RMON) of Ethernet services (10GE LAN).
NOTE
TN11TDX only supports Poisson mode.
TN12TDX/TN52TDX/TN53TDX only supports Bursty mode.
Cross-connect function OptiX OSN 8800:
TN53TDX: Supports the cross-connection of two channels of ODU2/ODU2e/ODUflex signals between the TDX board and the crossconnect board using the backplane.
OptiX OSN 6800:
TN12TDX/TN52TDX/TN53TDX: Supports the cross-connection of two channels of ODU2/ODU2e signals between the TDX board and the cross-connect board using the backplane.
Electrical-layer ASON Supported by the TN52TDX/TN53TDX.
Loopback function Client side: Supported inloop and outloop
Test frames Supports the test frame function when the client-side service type is 10GE LAN and the Port mapping is MAC Transparent Mapping(10.7 G).
Board Name TN53TDX01
Client-Side Pluggable Optical Module 10 Gbit/s Single Rate-0.3 km
Dimensions (mm) 264.6(10.4 in.) x 25.4(1.0 in.) x 220(8.7 in.)
Net Weight (kg) 1.5 kg
Volume weight (kg) 3
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif"><span style="background-color:rgb(255, 255, 255); color:rgb(51, 51, 51)">Double 10G Line Service Processing Board(AFEC,Tunable), 50GHz(800ps/nm,Rx1_PIN,Tx1_-3dBm~+2dBm,LC)</span></span></span></p>
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">10 *10G Tributary Service Processing Board</span></span></p>
<p><span style="font-size:14px"><span style="font-family:tahoma,geneva,sans-serif">Double 10G Line Service Processing Board(AFEC,Super WDM,Tunable), 50GHz(800ps/nm,Rx1_PIN,Tx1_-3dBm~+2dBm,LC)</span></span></p>
Functions and Features
Basic Functions TDX converts signals as follows:
TN53TDX: 2x10GE LAN/10GE WAN/STM-64/OC-192/OTU2/OTU2e/FC800/FC1200<->2xODU2/ODU2e, 2xFC800<->2xODUflex
Client-side service type STM-64/OC-192: SDH/SONET service at a rate of 9.95 Gbit/s
10GE LAN: Ethernet service at a rate of 10.31 Gbit/s
10GE WAN: Ethernet service at a rate of 9.95 Gbit/s
OTU2: OTN service at a rate of 10.71 Gbit/s
OTU2e: OTN service at a rate of 11.1 Gbit/s
FC800: SAN service at a rate of 8.5 Gbit/s
FC1200: SAN service at a rate of 10.51 Gbit/s
NOTE
Only the TN52TDX/TN53TDX supports OTU2 and OTU2e services.
Only the TN53TDX board supports FC800 and FC1200 services.
The processing of the 10GE WAN service and the STM-64 service is the same. Therefore, For TN11TDX/TN12TDX/TN52TDX board, when the 10GE WAN service is transmitted, you can configure it as the STM-64 service on the U2000.
OTN function Supports the OTN frame format and overhead processing by referring to the ITU-T G.709. The mapping process is compliant with ITU-TG.709 and G.Sup43.
Supports PM functions for ODU2.
ALS function Supports the ALS function on the client side.
ESC function Supported by the TN52TDX/TN53TDX when the client-side service type is OTU2 or OTU2e.
Latency measurement The TN53TDX board supports latency measurement. The bidirectional latency at the ODUk layer between two tributary boards supporting the latency measurement function can be measured, and the latency data is displayed on the U2000.
NOTE
This function is not supported when the client-side service type is OTU2/OTU2e.
PRBS function Supports the PRBS function on the client side.
NOTE
The PRBS function on the client side is supported only when the client-side service type is STM-64/OC-192, OTU2 or OTU2e.
LPT function The board supports the LPT function only when the client-side service type is 10GE LAN.
Protection Schemes Supports ODUk SNCP.
Supports client 1+1 protection.
Supports tributary SNCP protection (TN12TDX/TN52TDX/TN53TDX).
NOTE
When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.
NOTE
When the board receives OTN services, SDH/SONET services, and 10GE WAN services the board supports tributary SNCP protection.
Clock function TN53TDX:
When the board receives 10GE LAN services and the port mapping is Bit Transparent Mapping (11.1 G) on its client side, the board can support synchronous Ethernet transparent transmission instead of synchronous Ethernet processing.
When the board receives 10GE LAN services and the port mapping is MAC Transparent Mapping (10.7 G). on its client side, the board can support synchronous Ethernet processing instead of synchronous Ethernet transparent transmission.
Alarms and performance events monitoring Monitors BIP8 bytes (Poisson mode or Bursty mode) to help locate line failures.
Monitors B1 bytes to help locate faults.
Monitors OTN alarms and performance events.
Monitors parameters such as the bias current, temperature, and optical power of the laser.
Supports the remote monitoring (RMON) of Ethernet services (10GE LAN).
NOTE
TN11TDX only supports Poisson mode.
TN12TDX/TN52TDX/TN53TDX only supports Bursty mode.
Cross-connect function OptiX OSN 8800:
TN53TDX: Supports the cross-connection of two channels of ODU2/ODU2e/ODUflex signals between the TDX board and the crossconnect board using the backplane.
OptiX OSN 6800:
TN12TDX/TN52TDX/TN53TDX: Supports the cross-connection of two channels of ODU2/ODU2e signals between the TDX board and the cross-connect board using the backplane.
Electrical-layer ASON Supported by the TN52TDX/TN53TDX.
Loopback function Client side: Supported inloop and outloop
Test frames Supports the test frame function when the client-side service type is 10GE LAN and the Port mapping is MAC Transparent Mapping(10.7 G).
Technical Specification
Board Name TN53TDX01
Client-Side Pluggable Optical Module 10 Gbit/s Single Rate-0.3 km
Mechanical Specifications
Dimensions (mm) 264.6(10.4 in.) x 25.4(1.0 in.) x 220(8.7 in.)
Net Weight (kg) 1.5 kg
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: