Bestsellers

TND1EF8F

Brand: Huawei
Model: EF8F

Description: 8* FE Optical Signals Interface Board

Part Number:
Quantity:


HUAWEI

TND1EF8F

TND1EF8F

The TND1EF8F is a FE service processing board. The TND1EF8F can be used on the OptiX PTN 910, PTN 950 equipment to transmit and receive Ethernet services

100BASE-FX (15 km)

 

Basic Functions Supports eight FE optical interfaces. Accesses 8 x FE optical signals.
Supports the hot swappable function.
Detects the temperature and voltage of the board.
Clock function Synchronous Ethernet: Supported
SSM protocol: Supported
IEEE 1588V2 protocol: Supported
1588 ACR clock (unicast and multicast): Supported
DCN Supports the inband DCN. By default, the DCN function is enabled at the first four ports. In addition, this function can be disabled or enabled manually.
Interface function Working mode; Auto-Negotiation, 100M Full-Duplex
Type of the loopback at the port: PHY-layer inloop
MAC-layer outloop
Automatic loopback release at the port: Supported
Collection of bandwidth utilization statistics at a port: Supported
LAG Intra-board LAG Supported
Inter-board LAG Supported
MAC addresses Supported
Board Name TND1EF8F
Optical Interface Type Two-fiber bidirectional interface:
100BASE-FX (15 km)
Fiber Type Single-mode
Wavelength (nm) 1261 to 1360
Optical Power (dBm) -15 to -8
Receiver Sensitivity (dBm) -28
Minimum Overload (dBm) -8
Minimum Extinction Ratio (dB) 8.2
Optical module code 34060276
34060307
Dimensions (mm) 20.32 (H) x 225.75 (D) x 193.80 (W)
Net Weight (kg) 0.55
Volume weight (kg) 3
Functions and Features
Basic Functions Supports eight FE optical interfaces. Accesses 8 x FE optical signals.
Supports the hot swappable function.
Detects the temperature and voltage of the board.
Clock function Synchronous Ethernet: Supported
SSM protocol: Supported
IEEE 1588V2 protocol: Supported
1588 ACR clock (unicast and multicast): Supported
DCN Supports the inband DCN. By default, the DCN function is enabled at the first four ports. In addition, this function can be disabled or enabled manually.
Interface function Working mode; Auto-Negotiation, 100M Full-Duplex
Type of the loopback at the port: PHY-layer inloop
MAC-layer outloop
Automatic loopback release at the port: Supported
Collection of bandwidth utilization statistics at a port: Supported
LAG Intra-board LAG Supported
Inter-board LAG Supported
MAC addresses Supported
Technical Specification
Board Name TND1EF8F
Optical Interface Type Two-fiber bidirectional interface:
100BASE-FX (15 km)
Fiber Type Single-mode
Wavelength (nm) 1261 to 1360
Optical Power (dBm) -15 to -8
Receiver Sensitivity (dBm) -28
Minimum Overload (dBm) -8
Minimum Extinction Ratio (dB) 8.2
Optical module code 34060276
34060307
Mechanical Specifications
Dimensions (mm) 20.32 (H) x 225.75 (D) x 193.80 (W)
Net Weight (kg) 0.55
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: