Bestsellers

TND1EF8T

Brand: Huawei
Model: EF8T

Description: 8* FE Electrical Signals Interface Board 

Part Number:
Quantity:


HUAWEI

TND1EF8T

EF8T

The TND1EF8T is a FE service processing board. The TND1EF8T can be used on the OptiX PTN 910, PTN 950 equipment to transmit and receive Ethernet services

Basic Functions Supports eight FE electrical interfaces.
Supports the hot swappable function.
Detects the temperature and voltage of the board
DCN Supports the inband DCN. By default, the DCN function is enabled at the first four ports. In addition, this function can be disabled or enabled manually.
Interface function Working mode: Auto-Negotiation, 10M Full–Duplex, 100M Full-Duplex
Type of the loopback at the port: PHY-layer inloop and MAC-layer outloop
Automatic loopback release at the port: Supported
Collection of bandwidth utilization statistics at a port: Supported
LAG Intra-board LAG Supported
Inter-board LAG Supported
MAC addresses Supported
Clock Synchronization Synchronous Ethernet: Supported
SSM protocol: Supported
IEEE 1588V2 protocol: Supported
1588 ACR clock (unicast and multicast): Supported
Board Name TND1EF8T
FE electrical signal interface rate Supports interface rates at 10 Mbit/s and 100 Mbit/s.
RJ-45 Specification Complies with IEEE 802.3.
Dimensions (mm) 20.32 (H) x 225.75 (D) x 193.80 (W)
Net Weight (kg) 0.53
Volume weight (kg) 3
Functions and Features
Basic Functions Supports eight FE electrical interfaces.
Supports the hot swappable function.
Detects the temperature and voltage of the board
DCN Supports the inband DCN. By default, the DCN function is enabled at the first four ports. In addition, this function can be disabled or enabled manually.
Interface function Working mode: Auto-Negotiation, 10M Full–Duplex, 100M Full-Duplex
Type of the loopback at the port: PHY-layer inloop and MAC-layer outloop
Automatic loopback release at the port: Supported
Collection of bandwidth utilization statistics at a port: Supported
LAG Intra-board LAG Supported
Inter-board LAG Supported
MAC addresses Supported
Clock Synchronization Synchronous Ethernet: Supported
SSM protocol: Supported
IEEE 1588V2 protocol: Supported
1588 ACR clock (unicast and multicast): Supported
Technical Specification
Board Name TND1EF8T
FE electrical signal interface rate Supports interface rates at 10 Mbit/s and 100 Mbit/s.
RJ-45 Specification Complies with IEEE 802.3.
Mechanical Specifications
Dimensions (mm) 20.32 (H) x 225.75 (D) x 193.80 (W)
Net Weight (kg) 0.53
Volume weight (kg) 3

Write a review

Your Name:


Your E-mail:


Your Name: Your Review: Note: HTML is not translated!

Rating: Bad             Good

Enter the code in the box below: