Starting from V200R003, the switch has the web network management function configured by default.
You can use the web system to log in to the switch.
In versions earlier than V200R003, complete the following configurations before you can use the web
system to log in to the switch:
1. Run the http server load file-name command to load the web page file saved on the switch's storage
device before delivery. If the switch uses a non-factory delivery software version, load a web page file
matching the current system software through FTP or TFTP.
2. Enable the HTTP function and create a web user account.
[HUAWEI] http secure-server enable
[HUAWEI] http server enable
[HUAWEI] local-user admin password cipher admin
[HUAWEI] local-user admin service-type http
3. Open the web browser on your PC, enter the management IP address of the switch, and press Enter to
display the Login page. (Ensure that the PC and switch have a reachable route to each other.) Enter the
web user name, password, and verification code, and select a language for the web system, as shown in Figure 1.
Figure 1 Login page