The BMS version: BMS R8 and later versions
When using the TL1 NBI port to do the test, there are something wrong as following:
deactive an ADSL port which has been activated, the result is successful.
deactive an ADSL port which has been deactivated, the result is successful.
deactive an ADSL port which is inexistent, the result is also successful.
If want to the system report the errors, operate the following commands and restart the NBI process:
update bms_cfg_tab set CfgValue = '0' where CfgName
1.Sending the same TL1 commands to other devices, the result is same. Send the same TL1
commands from other BMS servers to devices, the result is same. The problem is avoidless.
Maybe there is something wrong with the BMS system itself.
2.When provisioning the ADSL service, there are some steps which will be operated: deactive,
bind the ADSL port with an line profile, active. When provisioning service to an ADSL port
which has been deactived, there will be an error that the ADSL port has been deactived.
So the R&D staff set a switch which controls the error report of deactiving an ADSL port.
When deactive an ADSL port which is actived or deactived, there will be no errors by default.
So the above problem is normal.