CE6820-48S6CQ
CE6820-48S6CQ Huawei CE6800 switch supports 48 ports 10G SFP+, 6 ports 100G QSFP28
- Description
- DATASHEET
- Reviews (0)
Description
CE6820-48S6CQ overview
Huawei CE6820-48S6CQ with 48 ports 10G SFP+, 6 ports 100G QSFP28 without fan and power modules is one of the CE6800 series switch.
Offering high performance, high port density, and low latency, CloudEngine 6800 series switches enable enterprises and carriers alike to build cloud-oriented data center networks. Advanced data center features, high performance stacking technologies, and flexible airflow capabilities complete the series. CloudEngine 6800 is well suited to both the core and aggregation layers and is fully compatible with CloudEngine 16800 and 12800 series switches, enabling enterprises to build scalable, simplified, open, and secure networks.
Appearance of the CE6820-48S6CQ
1 | Ground screw |
2 | Equipment serial number (ESN) |
3 | Console port |
4 | ETH management port (RJ45) |
5 | USB port |
6 | Fan slot 1 |
7 | Fan slot 2 |
8 | Fan slot 3 |
9 | Fan slot 4 |
10 | Power supply slot 1 |
11 | Power supply slot 2 |
12 | Forty-eight 10GE SFP+ Ethernet optical ports |
13 | Six 40GE/100GE QSFP28 Ethernet optical ports |
14 | Three port-side mounting holes for mounting brackets |
15 | Two middle mounting holes for mounting brackets |
16 | Equipotential bonding Ground screws for a ground cable with a two-hole OT terminal |
17 | Four power-supply-side mounting holes for mounting brackets |
Indicators on the CE6820-48S6CQ1
1 | System status indicator |
2 | Stack master/slave indicator |
3 | ID indicator |
4 | Service port indicator (10GE optical port) |
5 | Service port indicator (40GE/100GE optical port) |
Indicators on the CE6820-48S6CQ2
6 | ETH management port indicator |
7 | USB-based deployment indicatorc |
Ports on the CE6820-48S6CQ
Port | Connector Type | Description | Available Components |
---|---|---|---|
10GE SFP+ Ethernet Optical Port | LC | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s, and can receive and send services at a rate of 1000 Mbit/s or 10 Gbit/s.
|
GE eSFP optical modules
GE SFP copper modules 10GE SFP+ optical modules |
40GE/100GE QSFP28 Optical Port | Depending on the optical module | A 40GE/100GE QSFP28 optical port sends and receives service traffic at 40 Gbit/s or 100 Gbit/s.
|
40GE QSFP+ optical modules
100GE QSFP28 optical modules |
Console Port | RJ45 | The console port is connected to a console for onsite configuration.
|
Console cable |
ETH Management Port | RJ45 | The ETH management port (RJ45) of a switch is connected to the network port of a configuration terminal or network management workstation to set up the onsite or remote configuration environment.
|
The ETH management port (RJ45) uses a Category 5 or higher category cable. |
USB Port | USB | A USB flash drive can be connected to the USB port for log backup, system software backup and uploading, or USB-based deployment. | USB 2.0-compliant USB flash drive |
Item | CE6820-48S6CQ |
---|---|
CPU | 4-core, 1.4GHZ |
Memory | DRAM: 4 GB |
NOR Flash | 64 MB |
NAND Flash | 2GB |
Power supply mode |
|
Console port | RJ45 |
Downlink Service interface | 48*10GE SFP+ (Note: 1. 10GE interfaces are compatible with GE; 2. The interfaces do not support 10GE LRM/80KM linear optical modules) |
Uplink Service interface | 6*100GE QSFP28 (Note: 1. Each 100G QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100G QSFP28 port cannot be split into four 25GE or 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack interfaces and M-LAG peer-link interfaces.) |
Service port supporting the stack function | 10GE optical ports, and 100GE optical ports |
RTC | Supported |
Typical power consumption [W] |
|
Typical heat dissipation [BTU/hour] |
|
Static power consumption [W] | 102 W |
Static heat dissipation [BTU/hour] | 348 BTU/hour |
Maximum power consumption [W] | 282 W |
Maximum heat dissipation | 962 |
Number of power modules | 2 |
Redundant power supply | 1+1 backup |
Rated input voltage [V] |
|
Input voltage range [V] |
|
Maximum input current [A] |
|
Rated output power [W] |
|
Maximum output power [W] |
|
Certification |
|
Power supply surge protection [kV] |
|
Types of fans | Pluggable |
Number of fans | 4 |
Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Heat dissipation mode | Air cooling |
Airflow direction | Front-to-back or back-to-front, depending on the fan modules and power modules. |
Availability | 0.99999618 |
MTBF [year] | 45.48 year |
MTtr [hour] | 1.52 hour |
Noise at normal temperature (27°C, sound pressure) [dB(A)] |
|
Noise at high temperature (40°C, sound pressure) [dB(A)] |
|
Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) |
Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.9 in. x 25.6 in. x 21.7 in.) |
Dimensions without packaging (H x W x D) [mm (in.)] |
|
Weight without packaging (base configuration) [kg (lb)] | 5.6 kg (excluding optical modules, power modules, and fan modules) |
Weight without packaging (full configuration) [kg (lb)] | 7.7 kg (17.0 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
Weight with packaging (base configuration) [kg (lb)] | 9kg (excluding optical modules, power modules, and fan modules) |
Reviews
There are no reviews yet.