.svg)
.svg)
Description
CE6820H-48S6CQ overview
Huawei CE6820H-48S6CQ with 48 ports 10G SFP+, 6 ports 100G QSFP28, without fan and power modules, is one of the Huawei CE6800 series switch.
Offering high performance, high port density, and low latency, CloudEngine 6800 series switches enable enterprises and carriers alike to build cloud-oriented data center networks. Advanced data center features, high performance stacking technologies, and flexible airflow capabilities complete the series. CloudEngine 6800 is well suited to both the core and aggregation layers and is fully compatible with CloudEngine 16800 and 12800 series switches, enabling enterprises to build scalable, simplified, open, and secure networks.
Appearance of the CE6820H-48S6CQ
| 1 | Ground screw |
| 2 | Equipment serial number (ESN) and MAC address |
| 3 | Console port |
| 4 | ETH management port (RJ45) |
| 5 | USB port |
| 6-9 | Four Fan slots |
| 10-11 | Two Power supply slots |
| 12 | Forty-eight 10GE SFP+ Ethernet optical ports |
| 13 | Six 40GE/100GE QSFP28 Ethernet optical ports |
| 14 | Three port-side mounting holes for mounting brackets |
| 15 | Two middle mounting holes for mounting brackets |
| 16 | Equipotential bonding Ground screws for a ground cable with a two-hole OT terminal |
| 17 | Four power-supply-side mounting holes for mounting brackets |
Indicators on the CE6820H-48S6CQ (port side)
| 1 | System status indicator |
| 2 | Stack master/slave indicator |
| 3 | ID indicator |
| 4 | Service port indicator (10GE optical port) |
| 5 | Service port indicator (40GE/100GE optical port) |
Indicators on the CE6820H-48S6CQ (power supply side)
| 6 | Service port indicator (40GE/100GE optical port) |
| 7 | USB-based deployment indicatorc |
Ports on the CE6820H-48S6CQ
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10GE SFP+ Ethernet Optical Port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s, and can receive and send services at a rate of 1000 Mbit/s or 10 Gbit/s. | GE eSFP optical modules GE SFP copper modules
(works at 100 Mbit/s or 1000 Mbit/s) 10GE SFP+ optical modules 10GE SFP+ to 10GE SFP+ AOC cable 10GE SFP+ to 10GE SFP+ high-speed cable |
| 40GE/100GE QSFP28 Optical Port | QSFP28 | A 40GE/100GE QSFP28 optical port sends and receives service traffic at 40 Gbit/s or 100 Gbit/s. A 40GE/100GE QSFP28 optical port cannot be split. | 40GE QSFP+ optical modules
100GE QSFP28 optical modules 40GE QSFP+ to 40GE QSFP+ AOC cable 40GE QSFP+ to 40GE QSFP+ high-speed cable (The cable can only be used as a stack cable or be used to connect peer-link interfaces in an M-LAG.) 100GE QSFP28 to 100GE QSFP28 AOC cable 100GE QSFP28 to 100GE QSFP28 high-speed cable (The cable can only be used as a stack cable or be used to connect peer-link interfaces in an M-LAG.) |
| Console Port | RJ45 | The console port is connected to a console for onsite configuration. | Console cable |
| ETH Management Port | RJ45 | The ETH management port (RJ45) of a switch is connected to the network port of a configuration terminal or network management workstation to set up the onsite or remote configuration environment. | The ETH management port (RJ45) uses a Category 5 or higher category cable. |
| USB Port | USB 2.0 Type A | A USB flash drive can be connected to the USB port for log backup, system software backup and uploading. The switch does not support USB-based deployment. | USB 2.0 |
Ben Jahnke –
Buy one for testing, works well now. But the package was slightly damaged due to rough loading and unloading, I hope there will be better packaging.
Magdalena –
Placed the order immediately after confirming with the sales manager, cuz we had shopping experiences from Telecomate before. We bought pieces of this CE6820H-48S6CQ switch, all of them have operated perfectly in our data center so far. Really reliable partners.