CE6881E-48S6CQ
CE6881E-48S6CQ Huawei CE6800 switch supports 24*10GE SFP+, 24*25GE SFP28, 6*100GE QSFP28
- Description
- DATASHEET
- Reviews (0)
Description
CE6881E-48S6CQ overview
CE6881E-48S6CQ Huawei CE6800 switch supports 24*10GE SFP+, 24*25GE SFP28, 6*100GE QSFP28
CE6881E-48S6CQ appearance
1 | Ground screw | 2 |
Equipment serial number (ESN)
|
3 | Console port | 4 | ETH management port (RJ45) |
5 | USB port | 6 | Fan slot 1 |
7 | Fan slot 2 | 8 | Fan slot 3 |
9 | Fan slot 4 | 10 | Power supply slot 1 |
11 | Power supply slot 2 | 12 | Twenty-four 10GE SFP+ Ethernet optical ports |
13 | Twenty-four 10GE/25GE SFP28 Ethernet optical ports | 14 | Six 40GE/100GE QSFP28 Ethernet optical ports |
15 | Three port-side mounting holes for mounting brackets | 16 | Two middle mounting holes for mounting brackets |
17 | Equipotential bonding
Ground screws for a ground cable with a two-hole OT terminal |
18 | Four power-supply-side mounting holes for mounting brackets |
CE6881E-48S6CQ application
Item | Details |
---|---|
Description | CE6881E-48S6CQ switch (24*10GE SFP+, 24*25GE SFP28, 6*100GE QSFP28) |
Part Number | 02353LHN |
Model | CE6881E-48S6CQ |
First supported version | V200R019C10 |
Item | CE6881E-48S6CQ |
Installation Type | Cabinet Installation |
CPU | 4-core, 1.4GHZ |
Memory | DRAM: 4 GB |
NOR Flash | 64 MB |
NAND Flash | 4 GB |
Power supply mode |
|
Console port | RJ45 |
Downlink Service interface | 24 x 10GE SFP+ and 24 x 25GE SFP28 (10GE ports can be configured as GE ports, and the ports can automatically adjust their speeds based on the installed modules. 25GE ports can be configured as 10GE and GE ports. Every four downlink 25GE ports form a group, and their speeds can be set to 10 Gbit/s or 1 Gbit/s using the CLI. 10GE LRM/80KM linear optical modules are not supported. 25GE 1 m copper cables and 10GE 1 m/3 m/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 25GE copper cables can only be used on stack ports and M-LAG peer-link ports.) |
Uplink Service interface | 6*100GE QSFP28 (Note: 1. Each 100G QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100G QSFP28 port cannot be split into four 25GE or 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack interfaces and M-LAG peer-link interfaces. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state.) |
Service port supporting the stack function | 10GE optical ports, 25GE optical ports, and 100GE optical ports |
RTC | Supported |
Typical power consumption [W] | 203 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
252 W (100% throughput, short-distance optical modules on all ports, dual power modules) |
Typical heat dissipation [BTU/hour] | 693 BTU/hr (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
860 BTU/hr (100% throughput, short-distance optical modules on all ports, dual power modules) |
Static power consumption [W] | 165 W |
Static heat dissipation [BTU/hour] | 563 BTU/hour |
Maximum power consumption [W] | 363 W |
Maximum heat dissipation | 1239 |
Number of power modules | 2 |
Redundant power supply | 1+1 backup |
Rated input voltage [V] |
|
Input voltage range [V] |
|
Maximum input current [A] |
|
Rated output power [W] |
|
Maximum output power [W] | 600 W (AC&240 V HVDC)
1000 W (–48 V DC) |
Certification | · Complies with safety standards.
· Complies with EMC standards. · Complies with environmental protection standards. |
Power supply surge protection [kV] | AC: 6 kV in common mode and 6 kV in differential mode
DC: 4 kV in common mode and 2 kV in differential mode HVDC: 4 kV in common mode and 2 kV in differential mode |
Types of fans | Pluggable |
Number of fans | 4 |
Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Heat dissipation mode | Air cooling |
Airflow direction | Front-to-back or back-to-front, depending on the fan modules and power modules. |
Availability | 0.9999960856 |
MTBF [year] | 45.9 year |
MTTR [hour] | 1.57 hour |
Noise at normal temperature (27°C, sound pressure) [dB(A)] | Front-to-back airflow: < 58 dB(A)
Back-to-front airflow: < 57 dB(A) |
Noise at high temperature (40°C, sound pressure) [dB(A)] | Front-to-back airflow: < 75 dB(A)
Back-to-front airflow: < 74 dB(A) |
Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.)
NOTE: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.9 in. x 25.6 in. x 21.7 in.) |
Dimensions without packaging (H x W x D) [mm (in.)] |
|
Weight without packaging (base configuration) [kg (lb)] | 5.7 kg (excluding optical modules, power modules, and fan modules) |
Weight without packaging (full configuration) [kg (lb)] | 7.8 kg (17.2 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
Reviews
There are no reviews yet.