CE8850-64CQ-EI
CE8850-64CQ-EI Huawei CE8800 switch supports 2*10GE SFP+, 64*100GE QSFP28
- Description
- DATASHEET
- Reviews (0)
Description
CE8850-64CQ-EI overview
CE8850-64CQ-EI Huawei CE8800 switch supports 2*10GE SFP+, 64*100GE QSFP28
CE8850-64CQ-EI appearance
1 | Ground screw | 2 | Two ETH management ports (RJ45) |
3 | ESN and MAC address label | 4 | Console port |
5 | USB port | 6 | Mini USB port |
7 | Fan slot 1 | 8 | Fan slot 2 |
9 | Fan slot 3 | 10 | Power supply slot 1 |
11 | Power supply slot 2 | 12 | Sixty-four 40GE/100GE QSFP28 Ethernet optical ports |
13 | Two 10GE SFP+ Ethernet optical ports
These two ports are reserved for future function expansion and cannot be used currently. |
14 | Mounting holes for mounting brackets |
CE8850-64CQ-EI application
Device Series | Sub-series | Device Model | Short Name | Supported Version |
---|---|---|---|---|
CE8800 | CE8850 | CE8850-64CQ-EI | CE8850EI | V200R005C00 to V200R021C00 |
Item | CE8850-64CQ-EI |
Temperature |
|
Relative humidity | 5% RH to 95% RH, noncondensing |
Altitude | < 5000 m (16404 ft.) |
Noise (sound pressure, 27°C) |
|
Power source type | AC/DC/high-voltage DC |
AC power input |
|
DC power input |
|
High-voltage DC power input |
|
Rated input current |
|
Maximum power consumption | 965W |
Typical power consumption | 375 W (100% throughput, QSFP28 cables on 64 ports, double power modules) |
Maximum heat dissipation | 3293BTU/hr |
Typical heat dissipation | 1280 BTU/hr (100% throughput, QSFP28 cables on 64 ports, double power modules) |
Surge protection | Power module:
|
Heat dissipation mode | Air cooling |
Airflow | Front-to-back or back-to-front, depending on the fan modules and power modules |
Power module backup | 1+1 backup |
Fan module backup | The device supports 2+1 backup of fan modules. The system can operate normally for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately.
NOTE:
A CE8850EI chassis uses three fan modules, with each fan module containing one fan. The three fans in the chassis work in 2+1 backup mode. |
Hot swap | Supported by all power modules and fan modules |
Mean time between failures (MTBF) | 35.98 |
Mean time to repair (MTTR) | 1.68 |
Availability | 0.999997043 |
Processor | 1.5 GHz, eight-core |
DRAM Memory | 4GB |
NOR Flash | 32MB |
NAND Flash | 2GB |
Physical specifications |
|
Reviews
There are no reviews yet.