- Packing info
- Reviews (0)
Flexible Card Line Processing Unit(LPUF-120)
Flexible Card Line Processing Unit(LPUF-120) B
Flexible Card Line Processing Unit(LPUF-120) E
Supports 100G line-rate forwarding. There are two types of interfaces: two 50G interfaces and one 100G interface.
|Whether breakout is supported||No|
|Reliability and availability||Hot swappable.|
|Restrictions and remarks||
Ports 0 and 1 support 50G ports. Only port 0 supports a 100G port. 50G and 100G ports cannot be both used. Only the 50G port mode has FEC function.
When this subcard is used together with the CR5DLPUFF170 on an NE40E-X3, the upper limit of the short-term operating temperature of the NE40E-X3 is reduced by 5°C, and the long-term operating temperature range remains unchanged.Half-width,Only one board can be installed on the mother board (CR5DLPUFB070,CR5DLPUFB07B,CR5DLPUFB07E).
|Dimensions (H x W x D)||18.4 mm x 169 mm x 189.9 mm (0.72 in. x 6.65 in. x 7.48 in.)|
|Typical power consumption||69.0 W|
|0.8 kg (1.76 lb)||0.8 kg (1.76 lb)|
|Dimensions||36.5000 × 31.0000 × 10.0000 cm|