EC8B R1B PX20+
Fiberhome OLT EC8B R1B 8 ports Epon service card with SFP PX20+
In Stock
Shenzhen Warehouse
Fiberhome
- Description
- DATASHEET
- Packing info
- Reviews (2)
Description
Fiberhome EC8B PX20+ Card Overview
The EC8B PX20+ is an 8-port GPON OLT interface board, which can be used in the Fiberhome AN5516 series OLT: AN5516-04, AN5516-06, AN5116-06B/AN5516-01.
It works with the optical network terminal (ONT) to provide EPON access service.
Also, it can work with some optical network unit (ONU) or MxU to provide GE/FE Ethernet service.
This board comes with PX20+ SFP modules, but you can also choose one that comes with Epon SFP PX20++.
If comes with PX20+, supports ONT/ONU access of up to 512 subscribers.
If comes with PX20++, supports ONT/ONU access of up to 1024 subscribers.
The EC8B card has two versions: R1C and R1B. R1B is the mainstream version of the market. If a specific version is required, please contact [email protected].
Item | Fiberhome EC8B PX20+ | |
Service ports | ||
EPON Port | 8-GPON Port | |
EPON SFP Module Specification | ||
Type | PX20+ Module | |
Interface type | SC/PC | |
Transmitter | Signal nominal rate | 2.5 Gbit/s ± 100 ppm |
Wavelength range | 1480 nm to 1500 nm | |
Mean launched power (maximum) | +7 dBm | |
Mean launched power (minimum) | +3 dBm | |
Average launched power of OFF transmitter | -39 dBm | |
Extinction ratio (minimum) | +9 dB | |
Receiver | Signal nominal rate | 1.25 Gbit/s ± 100 ppm |
Wavelength range | 1260 nm to 1360 nm | |
Maximum receiving sensitivity | -30 dBm | |
Minimum overload optical power | -8 dBm | |
Power Consumption | ≤ 50W | |
MTBF (hour) | 146606.07 | |
MTBF (year) | 16.74 | |
Failure Rate (ppm) | 6.821 |
Additional information
Weight | 3.0000 kg |
---|---|
Dimensions | 50.0000 × 32.0000 × 8.0000 cm |
Abelard –
After comparing the three models, the staff explained in detail and finally chose px20 +, which is very in line with my needs.
Cristian –
The price is very economical, and compatible with three-party ONTs, like this card.