- Description
- DATASHEET
- Packing info
- Comparison
- Similar Products
- Reviews (2)
Description
Fiberhome GCOB C+ Card Overview
The GCOB C+ is an 16-port GPON OLT interface board, which can be used in the Fiberhome AN5516 serie OLT: AN5516-04, AN5516-06, AN5116-06B/AN5516-01.
It works with the optical network terminal (ONT) to provide GPON access service.
Also, it can work with some optical network unit (ONU) or MxU to provide GE/FE Ethernet service.
This board comes with C+ class SFP, but you can choose with Gpon SFP B+ or C++.
If comes with B+, supports ONT/ONU access of up to 1024 subscribers.
if comes with C+/C++, supports ONT/ONU access of up to 2048 subscribers.
The GCOB card has two version: T1A and S1B. S1B is the mainstream version of the market, and the T1A can only be used in the latest chassis. If a specific version is required, please contact at [email protected].
Fiberhome GCOB C+ Datasheet
Item | Fiberhome GCOB C+ | |
Service ports | ||
GPON Port | 16-GPON Port | |
GPON SFP Module Specification | ||
Type | C+ Module | |
Interface type | SC/PC | |
Transmitter | Signal nominal rate | 2.5 Gbit/s ± 100 ppm |
Wavelength range | 1480 nm to 1500 nm | |
Mean launched power (maximum) | +7 dBm | |
Mean launched power (minimum) | +3 dBm | |
Average launched power of OFF transmitter | -39 dBm | |
Extinction ratio (minimum) | +9 dB | |
Receiver | Signal nominal rate | 1.25 Gbit/s ± 100 ppm |
Wavelength range | 1260 nm to 1360 nm | |
Maximum receiving sensitivity | -30 dBm | |
Minimum overload optical power | -8 dBm | |
Power Consumption | ≤ 50W | |
MTBF (hour) | 146606.07 | |
MTBF (year) | 16.74 | |
Failure Rate (ppm) | 6.821 |
Additional information
Weight | 3.0000 kg |
---|---|
Dimensions | 50.0000 × 32.0000 × 8.0000 cm |
Service card comparison: Huawei vs. ZTE vs. Nokia vs. Fiberhome
Brand | Model | GPON | XG-PON | XGS-PON | XG-PON&GPON Combo | XGS-PON&GPON Combo | Port |
Huawei | MA5608T/83T/80T | XGBC | 4 | ||||
GPBD/GPBH | XGBD | 8 | |||||
GPFD | 16 | ||||||
MA5800 X2/X7/X15/X17 | XGHD | TWED/XSHD/TWHD | CGID/CGHD | CSHD | 8 | ||
GPLF/GPSF/GPUF/GPHF | XGSF | XSHF | CGHF | CSHF | 16 | ||
ZTE | C300/C320/C350 | GTGO | GTXO | GTTO | GTBO | 8 | |
GTGH | 16 | ||||||
C600/C650/C620/C680 | GFGH | GFXH | GFTH | GFBN/GFBH | GFCH | 16 | |
Nokia/Alcatel & Lucent | Nokia/AL 7360 | FGXT-A | 4 | ||||
NGLT-C/NGLT-A | FWLT-P | FWLT-B | 8 | ||||
FGLT-A/FGLT-B | 16 | ||||||
FiberHome | AN5516-01/04/06 | GC8B | 8 | ||||
GCOB | 16 | ||||||
AN6000 | GPOA | 16 | |||||
GX8A | 8 | ||||||
GM8A / GM8B | 8 | ||||||
GMOA | 16 | ||||||
GNOA | 16 |
PN. | Model | Description |
2200012R1C | GC8B R1C C+ | Fiberhome GC8B 8 ports Gpon service card R1C version with SFP C+ |
2200740R1B | EC8B R1B PX20+ | Fiberhome OLT EC8B R1B 8 ports Epon service card with SFP PX20+ |
GTGH | GTGH | ZTE ZXA10 C320/ C350/ C300/ 16-port GPON OLT interface board GTGH with C+/C++ module |
025KFD10 | H806GPFD | Huawei 16-port GPON OLT interface board with B+, C+ or C++ SFP module, apply to Huawei MA5608T/MA5680T/MA5683T |
Michelle –
The product is exactly what I expected it to be, it’s fantastic and the packaging is very good.
Adair –
The GCOB Card has two versions: T1A and S1B. S1B is the mainstream version of the market. I chose S1B. I was very satisfied after receiving the product, which is very satisfactory.