ZTE GFCH P01 16-port XGS-PON and GPON Combo OLT interface board with N1/B+ or N2/C+ module, which can be used in the ZTE OLT ZXA10 C600/C650/C680.
The GFCH P01 panel
Modules of the GFCH XGS-PON & GPON Combo Subscriber Card
Module
Function
Management and control module
Configures, controls, and manages the card.
PONMAC module
Implements all the functions on the GPON layer defined in ITU-T G.984.3 and the XGS-PON layer defined by ITU-T G.989.3 and ITU-T G.987.3.
NP module
Implements data processing on the service layer, including service bandwidth and QoS processing based on service types and user needs to meet the SLA requirements. The data processing function complies with TR156.
Optical module
Provides a GPON optical interface that complies with ITU-T G.984.2 or an XGS-PON optical interface that complies with ITU-T G.9807.
Clock module
Processes the system clock in compliance with ITU-T G.8262, G.8264, and G.781.
Operating Principle of GFCH the XGS-PON & GPON Combo Subscriber Card
GFCH P01 Datasheet
Item
GFCH P01
Port
16
Type
XGS-PON N1
GPON B+
XGS-PON N2
GPON C+
Operating wavelength
Tx: 1577 nm
Tx: 1490 nm
Tx: 1577 nm
Tx: 1490 nm
Rx: 1270 nm
Rx: 1310 nm
Rx: 1270 nm
Rx: 1310 nm
Package type
SFP+
SFP+
Bandwidth
Tx: 10 Gbit/s
Tx: 2.488 Gbit/s
Tx: 10 Gbit/s
Tx: 2.488 Gbit/s
Rx: 10 Gbit/s
Rx: 1.244 Gbit/s
Rx: 10 Gbit/s
Rx: 1.244 Gbit/s
Minimum output optical power
2 dBm
1.5 dBm
4 dBm
3.0 dBm
Maximum output optical power
5 dBm
5.0 dBm
7 dBm
7.0 dBm
Maximum receiver sensitivity
–26 dBm
–28.0 dBm
–28 dBm
–32.0 dBm
Optical connector type
SC/UPC
SC/UPC
Optical fiber type
Single mode
Single mode
Transmission distance
20 km
20 km
Saturation optical power
–5 dBm
–8.0 dBm
–7 dBm
–12.0 dBm
Extinction ratio
8.2 dB
8.2 dB
8.2 dB
8.2 dB
Dimensions
393.1 mm(H)× 23.9 mm(W) × 214 mm(D)
Weight
1.72kg
Additional information
Weight
3.0000 kg
5 reviews for GFCH P01
5 out of 5
Diego Vedia–
Usamos equipos de Huawei y ZTE en la red. Al principio íbamos a comprar GPUF o GPHF. El precio era disparatado o no podían suministrarlo. Finalmente, decidimos comprar esta placa de servicio, que resultó muy rentable.
5 out of 5
Jorge–
No es fácil encontrar un proveedor confiable, el servicio es muy bueno, si hay algún problema, contrataremos a un técnico para solucionarlo.
5 out of 5
Luis Antonio–
Purchased a pcs to test, good results, it is more economical than Huawei and Nokia’s XGSPON card.
5 out of 5
Johan–
Both uplink and downlink are 10G symmetrical rates, and the cost is only 60% of Huawei CSHF
5 out of 5
Maciej–
The price of ZTE XGS-PON is 50% cheaper than that of Huawei XGS-PON.
Diego Vedia –
Usamos equipos de Huawei y ZTE en la red. Al principio íbamos a comprar GPUF o GPHF. El precio era disparatado o no podían suministrarlo. Finalmente, decidimos comprar esta placa de servicio, que resultó muy rentable.
Jorge –
No es fácil encontrar un proveedor confiable, el servicio es muy bueno, si hay algún problema, contrataremos a un técnico para solucionarlo.
Luis Antonio –
Purchased a pcs to test, good results, it is more economical than Huawei and Nokia’s XGSPON card.
Johan –
Both uplink and downlink are 10G symmetrical rates, and the cost is only 60% of Huawei CSHF
Maciej –
The price of ZTE XGS-PON is 50% cheaper than that of Huawei XGS-PON.