Huawei, ZTE, Nokia, Alcatel Lucent, Fiberhome Network Hardware Store

Description

GFTH Card Overview

The GFTH is a 16-port XGS-PON OLT interface board with N1/N2a module, which can be used in the ZTE OLT ZXA10 C600/C650/C680.

Maximum optical split ratio: 1:256

Supports optical power monitoring

Supports the ALS function of optical modules

Supports hot swapping

The GFTH panel

Modules of the GFTH XGS-PON Subscriber Card

Module	Function
Management and control module	Configures, controls, and manages the card.
PON MAC module	Implements all the functions on the XGS-PON layer defined by ITU-T G.9807.
NP module	Implements data processing on the service layer, including service bandwidth and QoS processing based on service types and user needs to meet the SLA requirements. The data processing function complies with TR156.
Optical module	Provides an XGS-PON optical interface that complies with ITU-T G.9807.
Clock unit	Processes the system clock in compliance with ITU-T G.8262, G.8264, and G.781.

The operating Principle of the XGS-PON Subscriber Card GFTH

GFTH Datasheet

Item	GFTH
Port	16
Type	N1 Module: Single Fiber Bidirectional Optical Module N1 N2a Module: Single Fiber Bidirectional Optical Module N2a
Operating Wavelength	Tx: 1577 nm, Rx: 1270 nm
Encapsulation Type	SFP+
Port Rate	Tx: 10 Gbit/s, Rx: 10 Gbit/s
Minimun Output Optical Power	N1 Module: 2dBm N2a Module: 4dBm
Maximum Output Optical Power	N1 Module: 5dBm N2a Module: 7dBm
Maximum Receiver Sensitivity	N1 Module: -26dBm N2a Module: -28dBm
Optical Connector Type	SC/UPC
Optical Fiber Type	Single-mode
Reach	20.00 km
Saturation optical power	N1 Module: -5dBm N2a Module: -7dBm
Extinction ratio	8.2dBm
Weight	1.68kg
Dimensions (W x D x H)	393.1 mm(H) × 23.9 mm(W) × 214 mm(D)

Additional information

Weight	3.0000 kg