K662c
Huawei OLT compatible K662c AX3000Mbps dual-band 802.11ax WiFi 6 Edge ONT & WiFi 6 Mesh Router
3-5 days
Shenzhen Warehouse
- Description
- DATASHEET
- FAQ
- Download
- Reviews (5)
Description
Huawei OLT compatible K662c is a dual-band edge router that supports Wi-Fi 6 (AX3000Mbps Wi-Fi 6 Edge ONT).
It supports ultra-wideband access through Ethernet/Wi-Fi/PON upstream technology, and provides users with gigabit dual-band Wi-Fi 6 and gigabit network ports.
- New generation WiFi 6 wireless technology MU-MIMO
- Support PON uplink, FTTR evolution (cooperate with the main optical modem) VR/4K over Wi-Fi
- 160MHz bandwidth
- Strong anti-interference, wide coverage, self-healing network
- MIMO: 2×2 MIMO (2.4GHz&5GHz)
- Supported protocol: IEEE 802.11 ax (2.4GHz&5GHz)
- Memory: 128MB Flash, 256MB RAM
- V- interface rate: 600 Mbps (2.4GHz)+2400 Mbps (5GHz)
- Network side: GE or PON or WiFi
- User side: 3 *GE+2.4GHz&5GHz WiFi 6
- Connector type: SC/UPC
- Antenna Gain: 5dBi antenna*4
- GPON/EPON Supported
- Upstream 1310nm, downstream 1490nm
Web page:
Item | K662c |
Supported protocol | IEEE 802.11 ax (2.4GHz&5GHz) |
MIMO | 2×2 MIMO (2.4GHz&5GHz) |
Air interface rate | 600 Mbps (2.4GHz)
2400 Mbps (5GHz) |
PON ports | GPON/EPON supported Wavelength: upstream 1310nm, downstream 1490nm |
Gigabit Ethernet | MAC address restrictions MAC address learning Support 10Mbit/s, 100Mbit/s, 1000Mbit/s self-adaptive |
Memory | 128MB Flash, 256MB RAM |
Antenna type | 4*5dBi external antennas |
Ports | Network side: GE or PON or Wi-Fi User side: 3GE+2.4GHz&5GHz Wi-Fi 6 |
Power supply | 12V DC, 1 A |
Max power assumption | < 12W |
Dimensions (height × width × depth) | 35mm×195mm×125mm |
Weight | About 1 KG |
Q: What should I do if I have problems setting up Internet access?
- The edge router’s Wi-Fi cannot be found: Make sure the device is plugged in, wait a while, and rescan the Wi-Fi after the device boots up.
- Unable to access the configuration screen: Make sure your phone is connected to your device’s Wi-Fi and enter your IP address in your browser (see nameplate on the bottom of your device).
- What should I do if I can’t access the Internet after setting up the Internet: Please make sure that the connected home gateway/router can access the Internet normally; If a network cable is connected, make sure that there is no bad contact at the network port connection.
Q: How do edge routers factory reset?
When the K662c is in the power-on state, use a needle to press the reset button, hold it for more than 2 seconds, and release it after all indicators are off, that is, the factory reset is completed.
Q: How do I change the Wi-Fi name and password of my edge router?
- Log in to the web interface of the edge router: The Wi-Fi connected to the edge router will automatically jump, if not, you will need to enter the IP address in the browser (see nameplate on the bottom of the device).
- After entering the login password, modify the Wi-Fi name and password on the “My Wi-Fi” screen.
Martin –
Buy one K622c for testing, 4*5dBi antennas, WIFI signal is very good.
Jasmine –
The whole thing was perfect.
Daniel –
K662c can be used as WIFI 6 ONT or WIFI 6 router.
Robert –
Buy 5pcs K662c for testing purpose, it’s not only a WIFI6 ONT, but also a WIFI 6 mesh router.
Khalid –
Whether in router mode or as an edge ONU, the performance has passed our test.