K662c

Huawei OLT compatible K662c AX3000Mbps dual-band 802.11ax WiFi 6 Edge ONT & WiFi 6 Mesh Router

3-5 days

Shenzhen Warehouse

SKU: 2004609 Categories: , Tags: ,

Description

Huawei OLT compatible K662c is a dual-band edge router that supports Wi-Fi 6 (AX3000Mbps Wi-Fi 6 Edge ONT).

It supports ultra-wideband access through Ethernet/Wi-Fi/PON upstream technology, and provides users with gigabit dual-band Wi-Fi 6 and gigabit network ports.

  • New generation WiFi 6 wireless technology MU-MIMO
  • Support PON uplink, FTTR evolution (cooperate with the main optical modem) VR/4K over Wi-Fi
  • 160MHz bandwidth
  • Strong anti-interference, wide coverage, self-healing network

 

  • MIMO: 2×2 MIMO (2.4GHz&5GHz)
  • Supported protocol: IEEE 802.11 ax (2.4GHz&5GHz)
  • Memory: 128MB Flash, 256MB RAM
  • V- interface rate: 600 Mbps (2.4GHz)+2400 Mbps (5GHz)
  • Network side: GE or PON or WiFi
  • User side: 3 *GE+2.4GHz&5GHz WiFi 6
  • Connector type: SC/UPC
  • Antenna Gain: 5dBi antenna*4
  • GPON/EPON Supported
  • Upstream 1310nm, downstream 1490nm

 

Web page:

K662C

Item K662c
Supported protocol IEEE 802.11 ax (2.4GHz&5GHz)
MIMO 2×2 MIMO (2.4GHz&5GHz)
Air interface rate 600 Mbps (2.4GHz)

2400 Mbps (5GHz)

PON ports GPON/EPON supported
Wavelength: upstream 1310nm, downstream 1490nm
Gigabit Ethernet MAC address restrictions
MAC address learning
Support 10Mbit/s, 100Mbit/s, 1000Mbit/s self-adaptive
Memory 128MB Flash, 256MB RAM
Antenna type 4*5dBi external antennas
Ports Network side: GE or PON or Wi-Fi
User side: 3GE+2.4GHz&5GHz Wi-Fi 6
Power supply 12V DC, 1 A
Max power assumption < 12W
Dimensions (height × width × depth) 35mm×195mm×125mm
Weight  About 1 KG

Q: What should I do if I have problems setting up Internet access?

  1. The edge router’s Wi-Fi cannot be found: Make sure the device is plugged in, wait a while, and rescan the Wi-Fi after the device boots up.
  2. Unable to access the configuration screen: Make sure your phone is connected to your device’s Wi-Fi and enter your IP address in your browser (see nameplate on the bottom of your device).
  3. What should I do if I can’t access the Internet after setting up the Internet: Please make sure that the connected home gateway/router can access the Internet normally; If a network cable is connected, make sure that there is no bad contact at the network port connection.

 

Q: How do edge routers factory reset?

When the K662c is in the power-on state, use a needle to press the reset button, hold it for more than 2 seconds, and release it after all indicators are off, that is, the factory reset is completed.

 

Q: How do I change the Wi-Fi name and password of my edge router?

  1. Log in to the web interface of the edge router: The Wi-Fi connected to the edge router will automatically jump, if not, you will need to enter the IP address in the browser (see nameplate on the bottom of the device).
  2. After entering the login password, modify the Wi-Fi name and password on the “My Wi-Fi” screen.

5 reviews for K662c

  1. 5 out of 5

    Martin

    Buy one K622c for testing, 4*5dBi antennas, WIFI signal is very good.

  2. 4 out of 5

    Jasmine

    The whole thing was perfect.

  3. 5 out of 5

    Daniel

    K662c can be used as WIFI 6 ONT or WIFI 6 router.

  4. 5 out of 5

    Robert

    Buy 5pcs K662c for testing purpose, it’s not only a WIFI6 ONT, but also a WIFI 6 mesh router.

  5. 5 out of 5

    Khalid

    Whether in router mode or as an edge ONU, the performance has passed our test.


Add a review

Related products

has been added to your cart:
Checkout