ME0DE4NE8V70

ME0DE4NE8V70

8-Port 50G/4-Port 100GBase-QSFP28 Flexible Card(BP1T)

SKU: 03033CTL Category:

Description

ME0M0E2NFB71 Overview

8-Port 50G/4-Port 100GBase-QSFP28 Flexible Card(BP1T)

Mapping products and versions
Product Motherboard Minimum Version Requirement for Flexible Card
ME60X8A

Flexible Card Broadband Service Unit(BSUF-1T,2 sub-slots)

Flexible Card Multi Service Unit(MSUF-1T,2 sub-slots)

V800R012C00
ME60X16A

Flexible Card Broadband Service Unit(BSUF-1T,2 sub-slots)

Flexible Card Multi Service Unit(MSUF-1T,2 sub-slots)

V800R012C00
ME0DE4NE8V70 Datasheet
Item ME0DE4NE8V70
Line-Rate capability Supports 400G line-rate forwarding.
Reliability and availability Hot swappable.
Whether breakout is supported

Yes

To enable breakout interfaces, run the port split command to complete breakout configuration.

Restrictions and remarks

1. Even-numbered interfaces (interfaces 0, 2, 4, and 6) can work in 4x10GE breakout, 40GE, 50GE, or 100GE mode,50GE default,the working mode can be switched to 50GE/100GE using a port-speed command and be switched to 40GE/4x10GE breakout using a port split command. Odd-numbered interfaces (interfaces 1, 3, 5, and 7) can work only in 50GE mode.

2. If an even-numbered interface works in 4x10GE breakout, 40GE, or 100GE mode, the following odd-numbered 50GE interface cannot work. For example: If interface 0 works in 4x10GE breakout, 40GE, or 100GE mode, interface 1 cannot work. If interface 0 works in 50GE mode, interface 1 can work in 50GE mode. Interfaces 2 and 3, interfaces 4 and 5, and interfaces 6 and 7 comply with the same restrictions.

3. The four 10GE interfaces split from the same QSFP+ interface must all work in the same mode, either WAN or LAN mode. Mixed use of 10GE WAN and 10GE LAN modes is not allowed. 10GE WAN interfaces support only the master clock mode. The default transmission rate of an interface on the subcard is 50 Gbit/s. When the transmission rate of the used optical module does not match the default interface rate, for example, when a 40G optical module is used, run the port split command on the board interface to implement the interface breakout function.

4.When the 02312NCX optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F).

When the 02312MLF optical module is installed on the board, the long-term operating temperature of the optical module ranges from 0°C (32°F) to 45°C (113°F).

Optical type supported

40Gbps QSFP+ optical module

100Gbps QSFP28 optical module

Working mode Full-duplex
 Compliant standard  IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP
Dimensions (H x W x D) 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.)
Typical power consumption 64.4 W
Typical heat dissipation 208.9 BTU/hour
Weight 0.9 kg (1.98 lb)
Ambient temperature Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F)

Additional information

Weight 1.7000 kg
Dimensions 36.5000 × 31.0000 × 10.0000 cm

Reviews

There are no reviews yet.


Be the first to review “ME0DE4NE8V70”

has been added to your cart:
Checkout