NE8000 M8

Huawei NE8000 M8 with 2*IPU(1:1), 2*SFU(2, 1:1, integrated)

Huawei

3-5 days

Shenzhen Warehouse

SKU: 2005193 Category:

Description

NetEngine 8000 M8 is a all-scenario access & aggregation router for the cloud era. It’s featured with 3U height, 220mm depth, supports up to 1.2T port capacity and 8 service slots, flexibly adapts to different services, and supports 100GE/50GE/25GE/10GE/GE/E1/POS/cPOS interfaces. The compact design saves precious resources, greatly reduces Capex. It supports features such as SRv6, EVPN, network slicing, and 1588v2 high-precision clock, which is the best choice for multi-service convergence in the cloud era.

Huawei NE8000 M8 with 2*IPU(1:1), 2*SFU(2, 1:1, integrated)

Switching Capacity: 2.4 Tbps

Forwarding Performance: 453 Mpps

Max. Capacity of a Board: 200 Gbit/s

Capacity Density (G/U): 400

 

Front Panel:

NE8000-M8 -Front-Panel

Notice: 2*AC PIU occupy two slots.

 

 

 

Item NE8000 M8
Switching Capacity 2.4 Tbps
Forwarding Performance 453 Mpps
Max. Capacity of a Board 200 Gbit/s
Capacity Density (G/U) 400
IPU 2, 1:1
SFU 2, 1:1
(integrated)
Processing Board/
Subcard
8(DC)
6(AC)
Power Supply Module/Fans 2, 1+1
Interface Types 100GE/50E/40GE/25GE/10GE/GE/FE/E1/Channelized STM-1c/OC3c/STM-1c
Layer 2 Ethernet protocols G.8032, STP/RSTP, MSTP, BPDU, and LACP Transparent transmission of Layer 2 protocols
Ethernet service VLAN, Bridge domain
Routing RIP, RIPng, OSPF, OSPFV3, IS-IS, IS-ISV6, BGP, BGPv6, Static routing, IPv4 Multicast, IPv6 Multicast, Multicast static, etc
IPv4 TCP/IP, for example, ICMP, IP, TCP, UDP, Socket (TCP/UDP/RAW IP), ARP
Static DNS
DNS Client
FTP Server
FTP Client
TFTP Client
DHCP Relay 和 DHCP Server
Ping
Tracert
NQA
IP policy-based routing
Forwarding next hop based on traffic
IP policy-based route load balancing
The QinQ interface (QinQ termination and dot1q termination) supports IPv4 load balancing.
Enabling and disabling the rapid ping reply function based on interface boards
Forcible fragmentation for packets with length greater than MTU and DF enabled
MPLS-in-UDP tunnel egress
IPv6 IPv6(ND)
Path MTU (PMTU)
TCP6
Ping IPv6
Tracert IPv6
Socket IPv6
DHCPv6 Relay
Static IPv6 DNS
TFTP IPv6 Client
IP policy-based routing
IPv6 ND fast reply
L2VPN PWE3/VLL、VPLS、EVPN、EVPN L3VPN、VxLAN
L3VPN CE routers can access the L3VPN through L3 interfaces.
Support static routes between CE and PE, BGP, RIP, OSPF and ISIS
Inter-AS VPN, including RFC2547bis option A
Inter-AS VPN, including RFC2547bis option B
Inter-AS VPN, including RFC2547bis option C
NG-MVPN
IPv6 VPN
HoVPN
Seamless MPLS
BGP LSP entropy label
Redirect to VPN
L3VPN PIPE/Uniform mode
L3VPN Statistics
SRv6 SRv6-BE、SRv6-TE Policy、SRv6 egress protection
Clock Physical layer synchronization and 1588v2
OAM iFIT
IPFPM
NQA
TWAMP
BFD
MPLS OAM
MPLS-TP OAM
VRRP
Ethernet OAM
802.3ah
Y1731
Ethernet LPT
Bit-error-triggered protection switching
QoS QPPB,Differ-Serv,HQoS,Redirection
Typical power consumption(W) 485
Dimensions(mm) 132.6 x 442 x 220 mm (3 U)
Full Configuration Weight(kg) 16.5KG

4 reviews for NE8000 M8

  1. 5 out of 5

    Ilya

    NE8000 M8 2*AC PIU occupy two slots, so NE8000 M8 AC chassis is only 6 subcard slots.

  2. 5 out of 5

    Ron

    Sales at Telecomate.com helped me configure boards what i need.

  3. 5 out of 5

    Villa

    Professional sales team, recommend me cost-effective service boards to complete my configuration requirements.

  4. 5 out of 5

    Dawes

    The website’s interface was user-friendly.


Add a review

has been added to your cart:
Checkout