- Description
- DATASHEET
- Reviews (0)
Description
NP200/NP200E overview
Huawei OSN1800V 1x100G Turbo WDM Line Service Processing Board, extend to 200G/1*100G Turbo WDM Line Service Processing Extended Board.
The NP200 board and NP200E board are PID boards. The NP200 board can be independently used in a 100G system or work with the NP200E board in a 200G system. The NP200E board must work with the NP200 board in a 200G system.
The TNF6NP200/TNF6NP200E board supports the mixed transmission of OTN and SDH services. The TNZ5NP200 and TNZ5NP200E board supports hybrid transmission of OTN, SDH and packet services. It supports Layer 2 switching, MPLS-TP, and OTN interfaces.
The NP200 and NP200E boards consist of the following similar modules: signal processing module, PID optical module, control and communication module, and power module. The difference is that the NP200 board has an OADM optical module.
Version description of the NP200/NP200E board
Board |
Product Applicable |
System Control Board-Initial Board Version Supported by System Control Board |
---|---|---|
TNF6NP200/TNF6NP200E |
1800 V |
TNF5UXCM/TNF5UXCME/TNF5XCH-V100R006C20 |
TNZ5NP200/TNZ5NP200E |
1800 V |
TNZ5UXCMS-V100R008C00 |
Item |
NP200/NP200E |
||||||
---|---|---|---|---|---|---|---|
Basic function |
NP200/NP200E:
NOTE: Only TNZ5NP200/TNZ5NP200E board supports ODU3. NP200:
|
||||||
Cross-connect capabilities |
Supports the cross-connection of 80 channels of ODU0/ODUflex signals or 40 channels of ODU1 signals or 10 channels of ODU2/ODU2e signals or 2 chanels of ODU3 signal or one chanel of ODU4 signal between the NP200/NP200E and the cross-connect board. NOTE: Only TNZ5NP200/TNZ5NP200E board supports ODU3. |
||||||
OTN function |
NOTE: Only TNZ5NP200/TNZ5NP200E board supports ODU3. |
||||||
WDM specification |
Supports ITU-T G.694.1-compliant DWDM specifications. |
||||||
ESC function |
Supported |
||||||
PRBS function |
Supports the PRBS function on the WDM side. |
||||||
LPT function |
Not supported |
||||||
FEC coding |
SDFEC2 NOTE: Boards that use different FEC modes cannot interconnect with each other. |
||||||
Alarms and performance events monitoring |
|
||||||
ALS function |
Not supported |
||||||
Latency measurement |
Supported |
||||||
Test frame |
Not supported |
||||||
IEEE 1588v2 |
Not supported |
||||||
Physical clock |
Supported (ODU0/ODU1/ODU2/ODU2e/ODU3/ODUflex) NOTE: Only TNZ5NP200/TNZ5NP200E board supports ODU3. |
||||||
Protection scheme |
NOTE: When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection. |
||||||
Over-temperature protection |
If the temperature of a board exceeds the upper threshold and services are affected, the board will automatically reset the key chips to prevent a board damage. |
||||||
Loopback |
NOTE: The total bandwidth of channel inloops on the TNZ5NP200/TNZ5NP200E board must not exceed 40G. |
Reviews
There are no reviews yet.