S12700E-12
Huawei S12700E-12 switch chassis with 12 LPU slots, 4 SFU slots, 2 MPU slots, 2 CMU slots, and 6 power module slots
Huawei
3-5 days
Shenzhen Warehouse
- Description
- DATASHEET
- Comparison
- Reviews (0)
Description
S12700E-12 Overview
Huawei CloudEngine S12700E series agile switches are core switches designed for next-generation campus networks.
- Using a fully programmable switching architecture, the S12700E series switches allow for fast, flexible function customization and support a smooth evolution to software-defined networking (SDN).
- The S12700E series switches provide the native wireless access controller (AC) capability to help build a wired and wireless converged network. Their unified user management capabilities deliver refined user and service management, and Huawei’s Packet Conservation Algorithm for Internet (iPCA) supports hop-by-hop monitoring of any service flows, helping you manage services in a more refined way.
- The S12700E series switches run Huawei Versatile Routing Platform (VRP), which provides high-performance L2/L3 switching services as well as a variety of network services, such as MPLS VPN, desktop cloud, and video conferencing.
- The S12700E series switches adopt next-generation switch fabric (NGSF), and use the cell switching technology to reduce the forwarding latency and improve the load balancing capability of switch fabric units (SFUs).
- The S12700E series switches support single-link 100G hardware clustering and a variety of reliability technologies such as hardware Ethernet OAM, BFD, and ring network protection. These help you improve productivity and maximize network operation time, and therefore reduce the total cost of ownership (TCO).
The S12700E series switches come in three models: S12700E-4, S12700E-8, and S12700E-12. The maximum numbers of line processing units and switch fabric units supported by these models are:
- S12700E-4: 2 MPUs, 2 SFUs, and 4 LPUs
- S12700E-8: 2 MPUs, 4 SFUs, and 8 LPUs
- S12700E-12: 2 MPUs, 4 SFUs and 12 LPUs
The S12700E-12 chassis provides 12 LPU slots, 4 SFU slots, 2 MPU slots, 2 CMU slots, and 6 power module slots.
Mapping between the S12700E-12 chassis and software versions
Chassis | Version |
---|---|
S12700E-12 chassis | Supported in V200R019C00 and later versions |
Slot distribution in the S12700E-12 chassis
Slot Type | Slot ID | Slot ID | Remarks |
MPU slots | SLOT13, SLOT14 | MPU | MPUs in the two slots work in active/standby mode. |
MPU slots | SLOT15, SLOT18 | SFU | One to two SFUs can be installed. |
MPU slots | SLOT01 to SLOT014 | NOTE:
The cards supported by a switch depend on the software version. |
|
CMU slots | CMU1, CMU2 | CMU | NOTE:
The cards supported by a switch depend on the software version. |
CMU slots | PWR1 to PWR6 | Power Module | – |
Fan module slot | FAN1 to FAN5 | Fan Module | – |
Item | S12700E-12 |
Switching capacity | 57.6 Tbps/86.4 Tbps |
Packet forwarding rate |
43200 Mpps |
Service slots | 12 |
Wireless network management |
Native AC. |
Supports native N+N cold backup between ACs. | |
Supports cluster-based AC hot backup in cluster mode. | |
WLAN terminal location. | |
The function of locating interference sources is supported. | |
Supports the spectrum analysis function. | |
2.4G&5G load balancing, 5G priority mode is supported. | |
User management | unified user management |
802.1x, MAC address, and Portal authentication | |
Traffic-based and duration-based charging modes are supported. | |
Supports the grouping, domain-based, and time-based authorization. | |
iPCA quality awareness | Service packets can be directly marked to obtain the number of lost packets and the packet loss ratio in real time. |
Collects statistics on the number of lost packets and packet loss rate on Layer 2 and Layer 3 networks at the network and device levels. | |
SVF 2.0 virtualization | A maximum of 4K client nodes (access switches and APs) can be virtualized into one device for management. |
Supports Layer 2 ASs. | |
Supports hybrid networking management with third-party vendors. | |
VXLAN | Distributed VXLAN gateway and centralized gateway |
BGP-EVPN | |
VXLAN can be configured using NETCONF | |
MAC address | Maximum number of MAC address entries, 512K |
Automatic MAC address learning and aging | |
Supports static, dynamic, and blackhole MAC address entries. | |
Source MAC address filtering | |
MAC address learning limit based on port and VLAN | |
ARP | 256K ARP entries |
ARP Snooping | |
IP routing | Specifications of IPv4 routing entries, 512K |
Supports IPv4 dynamic routing protocols such as RIP, OSPF, ISIS, and BGP. | |
Supports IPv6 dynamic routing protocols such as RIPng, OSPFv3, ISISv6, and BGP4+. | |
Multicast | Supports IGMP v1/v2/v3 and IGMPv1/v2/v3 snooping |
Supports PIM-SM, PIM-DM, PIM-SSM | |
Supports 128, 000 multicast routing entries | |
Supports Multicast Source Discovery Protocol (MSDP) and Multiprotocol Extensions for BGP (MBGP) | |
Supports multicast traffic control | |
Supports multicast querier | |
Supports suppression on multicast packets | |
Supports multicast CAC, ACL | |
MPLS | Supports basic MPLS functions |
Supports MPLS OAM | |
Supports MPLS TE | |
Supports MPLS VPN/VLL/VPLS | |
Reliability | Supports LACP and E-Trunk |
Supports VRRP and BFD for VRRP | |
Supports BFD for BGP/IS-IS/OSPF/static route | |
Supports NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP | |
Supports TE FRR and IP FRR | |
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware-based) | |
Supports ITU-Y.1731 | |
Supports DLDP | |
Supports Smartlink | |
Supports Monitor-link | |
Supports network management protocols such as SNMPv1/v2c/v3. | |
Supports terminal services such as console, Telnet, and SSH. | |
Supports the (Streaming Telemetry) technology for stream remote sensing. | |
QoS | Supports combination traffic classification based on the Layer2 protocol header, Layer3 protocol, Layer4 protocol, and 802.1p priority. |
Supports actions of ACL, CAR, re-mark, and schedule | |
Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR |
|
Supports congestion avoidance mechanisms, such as WRED and tail drop | |
Supports H-QoS | |
Supports traffic shaping | |
Configuration and maintenance | Terminal access services such as console port login, Telnet, and SSH |
Supports the network management protocols, such as SNMP v1/v2c/v3 | |
Supports file uploading and downloading using FTP and TFTP | |
Supports BootROM upgrade and remote upgrade | |
Supports hot patches | |
Supports user operation logs | |
Supports eMDI | |
Security and management | Supports MAC address, Portal, 802.1x and DHCP snooping triggered authentication |
Supports MACsec | |
Supports RADIUS and HWTACACS authentication for login users | |
Supports command line authority control based on user levels, preventing unauthorized users from using commands configurations | |
Supports defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks | |
Supports RMON. | |
Supports Secure Boot | |
Supports 1K CPU hardware queues to implement hierarchical scheduling and protection for protocol packets on the control plane. | |
Support for Big Data Security Collaboration | |
Value-added services | Supports firewall |
Supports NAT | |
Supports Intrusion Protection System | |
Supports IPSec, SSL VPN | |
Supports Cybersecurity Intelligence System | |
Supports Encrypted Communication Analytics | |
Supports Load balancing Analog Digital Conversion | |
Interoperability | VLAN-based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST) |
Link-type Negotiation Protocol (LNP) (similar to DTP) | |
VLAN Central Management Protocol (VCMP) (similar to VTP) | |
Energy saving | Supports IEEE 802.3az: Energy Efficient Ethernet (EEE) |
Dimensions(W x D x H) | 841.75 mm × 442 mm × 517.4 mm |
Chassis weight(empty) | 71.8KG |
Operating voltage | DC: –48 V to –60 V AC: 90 V to 290V |
Power supply capability of the equipment |
8981W |
Chassis Model | Chassis Model |
S12700E-4 | Supports double Main Processing Units (MPUs), four Line Processing Units (LPUs), two Switch Fabric Units (SFUs), and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
S12700E-8 | Supports double MPUs, eight LPUs, four SFUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
S12700E-12 | Supports double MPUs, twelve LPUs, four SFUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
Reviews
There are no reviews yet.