S5130S-28S-HI

S5130S-28S-HI

H3C S5130S-28S-HI Ethernet Switch with 24*10/100/1000BASE-T Ports, 8*100/1000BASE-X SFP Combo Ports, and 4*1G/10G BASE-X SFP Plus Ports, dual power supply slots

H3C

3-5 days

Shenzhen Warehouse

Description

S5130S-28S-HI overview

H3C S5130S-HI Switch Series – A robust (modular dual power), cost-effective, easy-to-deploy access switching solution with autosensing (Auto-MDIX) POE+ that offers enhanced security and 10GbE uplinks, static route, RIP, OSPF, SDN andIRF enabled flexible management.

 

S5130S-28S-HI Features and benefits

High-Performance IPv4/IPv6 service capabilities

Software Defined Network (SDN)

Intelligent Resilient Framework 2 (IRF2)

Smart Management Center (SmartMC)

Comprehensive Security Control

High availability

Abundant QoS policies

Professional Anti-lightning function

Feature S5130S-28S-HI S5130S-52S-HI S5130S-28S-PWR-HI S5130S-52S-PWR-HI
Port Switching capacity 128Gbps 176Gbps 128Gbps 176Gbps
Box Switching capacity 336Gbps
Forwarding capacity 96Mpps 132Mpps 96Mpps 132Mpps
CPU 1 Core, 800MHz
Dimensions (W × D × H) 440×360×43.6 440×360×43.6 440×460×43.6 440×460×43.6
Weight ≤6kg ≤6.5kg ≤8.5kg ≤9.5kg
Front panel data ports 24 x 10/100/1000BASE-T
Ethernet ports, (including 8 combo ports), 4 x 10G/1G BASE-X SFP+ ports
48 x 10/100/1000BASE-
T Ethernet ports, 4 x 10G/1G BASE-X SFP+
ports
24 x 10/100/1000BASE-T
Ethernet ports, (including 4 combo ports), 4 x 10G/1G BASE-X SFP+ ports
48 x 10/100/1000BASE-T
Ethernet ports, 4 x 10G/1G BASE-X SFP+
ports
Console port 1 × RJ-45 Out of Band console port 1 × Micro-USB(Type B) console port
Only the Micro-USB console port is available when you connect both ports.
Expansion slot
Power consumption Single AC: 34W Single DC: 36W Dual AC: 39W Single AC: 52W Single DC: 53W Dual AC: 55W Single AC:
Upto 898W (including 810W PoE)
Single AC:
Upto 1019W (including 900W PoE)
Dual AC:
(full configuration
)
Dual DC: 44W Dual DC: 57W Dual AC:
Upto 905W (including 810W PoE)
Upto 1854W
((including 1680W PoE)
MTBF(Year) 174.61 151.28 89.35 61.87
Feature S5130S-28C-HI S5130S-52C-HI S5130S-28C-PWR-HI S5130S-52C-PWR-HI
Port Switching capacity 128Gbps 176Gbps 128Gbps 176Gbps
Box Switching capacity 336Gbps
Forwarding capacity 96Mpps 132Mpps 96Mpps 132Mpps
CPU 1 Core, 800MHz
Dimensions (W × D × H) 440×360×43.6 440×460×43.6 440×460×43.6 440×460×43.6
Weight ≤4.5kg ≤4.5kg ≤5.4kg ≤5.8kg
Front panel data ports 24 x 10/100/1000BASE-T
Ethernet ports, (including 8 combo ports), 4 x 10G/1G BASE-X SFP+ ports
48 x 10/100/1000BASE-
T Ethernet ports, (including 2 combo ports), 2 x 10G/1G BASE-X SFP+ ports
24 x 10/100/1000BASE-T
Ethernet ports, (including 4 combo ports), 4 x 10G/1G BASE-X SFP+ ports
48 x 10/100/1000BASE-T
Ethernet ports, (including 2 combo ports),2 x 10G/1G BASE-X SFP+ ports
Console port 1 × RJ-45 console port
1 × Micro-USB console port
Only the Micro-USB console port is available when you connect both ports.
Expansion slot 1
Power consumption
(full configuration
)
Single AC: 30W Single DC: 32W Dual AC: 38W Dual DC: 38W Single AC: 49W Single DC: 58W Dual AC: 51W Dual DC: 52W Single AC:
Upto 907W (including 810W PoE)
Dual AC:
Upto 918W (including 810W PoE)
Single AC:
Upto 1032W (including 900W PoE)
Dual AC:
Upto 1855W
((including 1680W PoE)
MTBF(Year) 174.61 151.28 89.35 61.87
Flash/SDRAM 256MB/512MB
Maximum stacking bandwidth 80G
Maximum stacking number 9
SDN/
Open flow
OpenFlow 1.0 and 1.3
Multiple controllers (EQUAL, master/slave) Multiple tables flow
sFlow Group table Meter
Port aggregation GE/10GE port aggregation Dynamic aggregation Static aggregation
Cross-device aggregation
Port features IEEE802.3x flow control (full duplex) control based on port rate percentage
PPS/BPS-based storm control
IRF2 Distributed device management, distributed link aggregation, and distributed resilient routing Stacking through standard Ethernet interfaces
Local device stacking and remote device stacking
VLAN Port-based VLAN (up to 4094 VLANs) MAC-based VLAN
Protocol-based VLAN QinQ and selective QinQ VLAN mapping
Voice VLAN GVRP
VLAN tagging
Jumbo frame support
ACL Packet filtering at Layer 2 through layer 4 traffic classification based on source MAC addresses, destination MAC addresses, source IPv4/IPv6 addresses,
Time range-based ACL VLAN-based ACL Bidirectional ACL
QoS Port rate limit (receiving and transmitting) Packet redirection
Committed access rate (CAR) Eight output queues on each port
Flexible queue scheduling algorithms based on ports and queues, including SP, WRR, WFQ and SP+WRR
802.1p DSCP remarking Class of service (CoS)
DHCP DHCP Client DHCP Snooping
DHCP Snooping option82 DHCP Relay
DHCP Server
DHCP auto-config
IP routing IPV4 routing number 1K Static routing
RIPv1/v2 and RIPng OSPFv1/v2 and OSPFv3 Policy-based routing
BGP (Border gateway routing) Loopback IP interface
Route maps
MAC address table 16K
Multicast IGMP Snooping /MLD Snooping Multicast VLAN
Layer 2 ring network
protocol
STP/RSTP/MSTP/PVST
Smart Link RRPP
G.8032 Ethernet ring protection switching (ERPS)
OAM 802.1ag
802.3ah
802.1 AB (LLDP)
Mirroring Port mirroring RSPAN
traffic mirroring
Security Hierarchical user management and password protection MAC-based and Web-based authentication
802.1X
Guest VLAN RADIUS/HWTACACS/TACACS+
DHCP protection
Source-port filtering SSH 2.0,SSL VPN
Port isolation Port security
MAC address learning limit IP Source guard/ACLs
Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks STP protection : BPDU and STP root guard
IP/Port/MAC binding
EAD
Management and
maintenance
Loading  and  upgrading  through XModem/FTP/TFTP Configuration through CLI, Telnet, and console port SNMPv1/v2/v3 and Web-based NMS
Remote monitoring (RMON ) alarm, event, and history recording IMC NMS
System log, alarming based on severities, and output of debugging information NTP
Ping, tracert
Virtual cable test (VCT)
Device link detection protocol (DLDP) Loopback-detection
Green power EEE (802.3az)
Port auto Power down Port schedule down
Input voltage Non PoE model input voltage:
AC: Rated voltage range: 100V~240V AC, 50/60Hz DC: Maximum voltage range -48V~-60V DC
PoE model input voltage:
360W AC: 100V~240V, 50Hz~60Hz
720W AC: 100V~240V, 50Hz~60Hz
1110W AC: 115V~240V, 50Hz~60Hz
Operating temperature -5℃ ~ 50℃(normal operating temperature)
-5℃ ~ 45℃(When using transceiver modules with  maximum transmission distance < 80km)
-5℃ ~ 40℃(When using transceiver modules with  maximum transmission distance ≥ 80km)
-60m-5000m altitude: From 0m, the maximum operating temperature reduce by 0.33℃ for every time 100 the altitude increases by 100m.
Storage temperature -40℃~+70℃
Operating& storage
humidity
(noncondensi ng)
5%~95%
EMC FCC Part 15 Subpart B CLASS A ICES-003 CLASS A
VCCI CLASS CISPR 32 CLASS A EN
55032 CLASS A
AS/NZS CISPR32 CLASS A CISPR 24
EN 55024
EN 61000-3-2
EN 61000-3-3
ETSI EN 300 386 for telecommunications center installations GB/T 9254
YD/T 993
Safety UL 60950-1
CAN/CSA C22.2 No 60950-1 IEC 60950-1
EN 60950-1
AS/NZS 60950-1
FDA 21 CFR Subchapter J GB 4943.1

Reviews

There are no reviews yet.


Be the first to review “S5130S-28S-HI”

has been added to your cart:
Checkout