Huawei S5700-28P-LI-AC switch supports 24 10/100/1000BASE-T ports, 4 GE SFP ports, fixed AC power, supports RPS


3-5 days

Shenzhen Warehouse


Item S5700-28P-LI-AC
Fixed port 24 Ethernet 10/100/1000 ports, 4 GE SFP ports
Forwarding performance 42 Mpps
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
Reliability RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
ERPS (G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)
BPDU protection, root protection, and loop protection
IP routing Static routing
IPv6 features Neighbor Discovery (ND)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
Multicast IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
QoS/ACL Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
OAM Supports
Management and maintenance Virtual cable test
MAC Forced Forwarding (MFF)
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance using Telnet
SNMP v1/v2/v3
System logs and alarms of different levels
802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)
Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN? switches)
sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series)
DDR memory 256 MB
Flash memory V200R001: 64 M

BV200R002 and later versions: 200 MB

Mean time between failures (MTBF) S5700-28P-LI-AC: 49.69 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Surge protection: Service port protection Combo electrical ports on the CSFP switch: ±2 kV in common mode; electrical ports on the other models: ±6 kV in common mode
Surge protection: Power supply protection AC: ±6 kV in differential mode; ±6 kV in common mode
Stack port S5700-P-LI (with GE uplink ports):
V200R001: The last two uplink 1000Base-X optical ports can be used as stack ports.
V200R002 and later versions: The four uplink 1000Base-X optical ports can be used as stack ports.
Maximum stack bandwidth (bidirectional) S5700-P-LI (with GE uplink ports):
V200R001: 10 Gbit/s (using 1 m passive SFP+ cables); 20 Gbit/s (using 10 m active SFP+ cables)
V200R002: 20 Gbit/s (using 1 m passive SFP+ cables); 40 Gbit/s (using 10 m active SFP+ cables)
V200R003 and later versions: 20 Gbit/s (using 1 m passive SFP+ cables, or 3 m/10 m AOC cables); 40 Gbit/s (using 10 m active SFP+ cables)
RPS All S5700-LI series switches except the S5700-10P-PWR-LI-AC and S5700-10P-LI-AC support RPS.
PoE The PWR series support PoE.
Input AC voltage: Rated input voltage range 100 V AC to 240 V AC, 50/60 Hz
Input AC voltage: Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum system power consumption (100% throughput, 100% PoE loads, full speed of fans) S5700-28P-LI-AC: 24 W
Operating temperature 0°C to +50°C at an altitude between 0 m and 1800 m
Storage temperature -40°C to +70°C
Noise under normal temperature (27°C, sound power) S5700-28P-LI-AC: 0 (The device has no fans.)
Relative humidity 5% RH to 95% RH, noncondensing
Operating altitude 0 m to 5000 m
EN55022 Class A
ETSI EN 300 386 Class A
CFR 47 FCC Part 15 Class A
ICES 003 Class A
ITU-T K 20
ITU-T K 44
Environmental standards RoHS
Security IEC 60950-1
EN 60950-1/A11/A12
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
Laser safety IEC60825-1
Dimensions (W x D x H) S5700-28P-LI-AC: 442.0 mm x 220.0 mm x 43.6 mm
Empty loaded ≤ 5 kg

Additional information

Weight 5.0000 kg
Dimensions 55.5000 × 37.5000 × 9.0000 cm

2 reviews for S5700-28P-LI-AC

  1. 4 out of 5


    I bought it for my client, but they did not deliver it within the delivery time. He was very angry about it. The only thing makes us happy is that the package is intact, not damaged and switchs can working well.

  2. 5 out of 5


    Huawei original, all things went well, thanks Abbe.

Add a review

has been added to your cart: