My Cart

Mini Cart

CATEGORIES
My Cart

Mini Cart

S5700-52P-PWR-LI-AC

PN 02353176

48 10/100/1000BASE-T ports, 4 GE SFP ports, fixed AC power, supports RPS, PoE+

Shenzhen Warehouse
lead time 3-5 days
- +
Overview
Item S5700-52P-PWR-LI-AC
Fixed port 48 Ethernet 10/100/1000 ports, 4 GE SFP ports
Forwarding performance 78 Mpps
VLAN 4K VLANs
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
Reliability RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
SEP
STP, RSTP, and MSTP
BPDU protection, root protection, and loop protection
ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)
IP routing Static routing
IPv6 features Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
Multicast IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
QoS/ACL Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
OAM Supports
Access Security DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security
Management and maintenance Virtual cable test
Stacking
MAC Forced Forwarding (MFF)
Port mirroring and RSPAN (remote port mirroring)
Remote configuration and maintenance using Telnet
SNMP v1/v2/v3
RMON
Web NMS
HGMP
System logs and alarms of different levels
802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)
GVRP
MUX VLAN
Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)
sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series)
DDR memory 256 MB
Flash memory V200R001: 64 MB
V200R002 and later versions: 200 MB
Mean time between failures (MTBF) S5700-52P-PWR-LI-AC: 35.70 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Surge protection: Service port protection Combo electrical ports on the CSFP switch: ±2 kV in common mode; electrical ports on the other models: ±6 kV in common mode
Surge protection: Power supply protection AC: ±6 kV in differential mode; ±6 kV in common mode
Stack port S5700-P-LI (with GE uplink ports):
V200R001: The last two uplink 1000Base-X optical ports can be used as stack ports.
V200R002 and later versions: The four uplink 1000Base-X optical ports can be used as stack ports.
Maximum stack bandwidth (bidirectional) S5700-P-LI (with GE uplink ports):
V200R001: 10 Gbit/s (using 1 m passive SFP+ cables); 20 Gbit/s (using 10 m active SFP+ cables)
V200R002: 20 Gbit/s (using 1 m passive SFP+ cables); 40 Gbit/s (using 10 m active SFP+ cables)
V200R003 and later versions: 20 Gbit/s (using 1 m passive SFP+ cables, or 3 m/10 m AOC cables); 40 Gbit/s (using 10 m active SFP+ cables)
RPS All S5700-LI series switches except the S5700-10P-PWR-LI-AC and S5700-10P-LI-AC support RPS.
PoE The PWR series support PoE.
Input AC voltage: Rated input voltage range 100 V AC to 240 V AC, 50/60 Hz
Input AC voltage: Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum system power consumption (100% throughput, 100% PoE loads, full speed of fans) S5700-52P-PWR-LI-AC: 464.5 W (system power consumption: 94.5 W, PoE: 370 W)
Operating temperature 0°C to +50°C at an altitude between 0 m and 1800 m
Storage temperature -40°C to +70°C
Noise under normal temperature (27°C, sound power) S5700-52P-PWR-LI-AC: less than 49.2 dBA
Relative humidity 5% RH to 95% RH, noncondensing
Operating altitude 0 m to 5000 m
EMC CISPR22 Class A
CISPR24
EN55022 Class A
EN50024
ETSI EN 300 386 Class A
CFR 47 FCC Part 15 Class A
ICES 003 Class A
AS/NZS CISPR22 Class A
IEC61000-4-2
ITU-T K 20
ITU-T K 44
Environmental standards RoHS
REACH
WEEE
Security IEC 60950-1
EN 60950-1/A11/A12
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
Laser safety IEC60825-1
IEC60825-2
EN60825-1
EN60825-2
Dimensions (W x D x H) 442.0 mm x 310.0 mm x 43.6 mm
Empty loaded ≤ 5 kg
Reviews

Write Your Own Review

You're reviewing: S5700-52P-PWR-LI-AC

DELIVERY & RETURN

Custom static block for product detail
 
FAST DELIVERY

5-7 days global delivery

 
100% QUALITY ASSURED

2-times test procedure

 
Trusted Store

5 Years trusted online store

 
Money back & Return

RMA & Return to guarantee your money back