Item |
S5710-108C-PWR-HI |
Fixed ports |
48 x 10/100/1000 Base-T, 8 x 10 GE SFP+ ports |
Extended slots |
3 front extended slots: |
Optional subcard 1: |
16 x 10/100/1000 Base-T |
Optional subcard 2: |
16 x 1000 Base-X |
1 rear extended slot: |
Optional subcard 1: 4 x 10 GE SFP+ (no GE auto adaption) |
Optional subcard 2: 4 x 40 GE QSFP+ |
MAC address table |
IEEE 802.1d compliance |
456K MAC address entries |
MAC address learning and aging |
Static, dynamic, and blackhole MAC address entries |
Packet filtering based on source MAC addresses |
VLAN |
4K VLANs |
Guest VLAN and voice VLAN |
GVRP |
MUX VLAN |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
1:1 and N:1 VLAN Mapping |
Reliability |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
SEP |
ERPS(G.8032) |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) |
BPDU protection, root protection, and loop protection |
MPLS features |
MPLS L3VPN |
MPLS L2VPN(VPWS/VPLS) |
MPLS-TE |
MPLS QoS |
IP routing |
Static routing, RIPv1/v2, OSPF, IS-IS, BGP, and ECMP |
IPv6 features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
IPv6 ping, IPv6 tracert |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
IPv6 Static routing, RIPng, OSPFv3, IS-ISv6, BGP4+, and ECMP |
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
MLD v1/v2 snooping |
Multicast forwarding in a VLAN and multicast replication between VLANs |
Multicast load balancing among member ports of a trunk |
Controllable multicast |
Port-based multicast traffic statistics |
IGMPv1/v2/v3, MLDv1/v2, PIM-SM, PIM-DM, PIM-SSM, and MSDP |
QoS/ACL |
Rate limiting on packets sent and received by an interface |
Packet redirection |
Port-based traffic policing and two-rate three-color CAR |
Eight queues on each port |
WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms |
WRED |
Re-marking of the 802.1p priority and DSCP priority |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
Rate limiting in each queue and traffic shaping on ports |
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
Binding of the IP address, MAC address, interface, and VLAN |
Port isolation, port security, and sticky MAC |
Blackhole MAC address entries |
Limit on the number of learned MAC addresses |
802.1x authentication and limit on the number of users on an interface |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC |
SSH v2.0 |
Hypertext Transfer Protocol Secure (HTTPS) |
CPU defense |
Blacklist and whitelist |
OAM |
Hardware OAM: |
EFM OAM |
CFM OAM |
Y.1731 performance test (hardware-level delay and jitter detection) |
Management and maintenance |
iStack |
MAC Forced Forwarding (MFF) |
Virtual cable test |
SNMP v1/v2c/v3 |
RMON |
Web-based NMS |
System logs and alarms of different levels |
802.3az EEE |
sFlow |
NetStream |
Dying gasp |
Operating environment |
Operating temperature: 0℃ to 50℃ |
Relative humidity: 5% to 95% (non-condensing) |
Input voltage |
AC: |
Rated voltage range: 100V to 240V AC, 50/60 Hz |
Maximum voltage range: 90V to 264V AC, 50/60 Hz |
DC: |
Rated voltage range: –48V to –60V, DC |
Maximum voltage range: –36V to –72V, DC |
Dimensions (W x D x H) |
442 mm x 220 mm x 43.6 mm |
Power consumption |
< 80W |
Reviews
There are no reviews yet.