S5731S-S24T4X-A
Huawei S5731S-S24T4X-A switch supports 24 10/100/1000BASE-T ports, 4 10GE SFP+ ports, 2 power unit slots
- Description
- DATASHEET
- Download
- Reviews (0)
Description
S5731S-S24T4X-A overview
Huawei S5731S-S24T4X-A switch supports 24 10/100/1000BASE-T ports, 4 10GE SFP+ ports, which is one of the Huawei S5731S-S series switches.
CloudEngine S5731-S series switches are next-generation standard gigabit switches that provide GE electrical downlink ports and 10GE uplink ports. The CloudEngine S5731-S series switches were developed based on next-generation high-performing hardware and the Huawei Versatile Routing Platform (VRP). The CloudEngine S5731-S supports simplified operations and maintenance (O&M), intelligent stack (iStack), flexible Ethernet networking. It also provides enhanced Layer 3 features and mature IPv6 features. The CloudEngine S5731-S can be used in various scenarios. For example, it can be used as an access or aggregation switch on a campus network or as an access switch for Metropolitan Area Network.
S5731S-S24T4X-A quick spec
24 10/100/1000BASE-T ports
4 10GE SFP+ ports
Forwarding Performance is 96 Mpps
Switching capacity is 128 Gpbs/672 Gbps
S5731S-S24T4X-A appearance and structure
1 | Twenty-four 10/100/1000BASE-T ports | 7 | Ground screw |
2 | Four 10GE SFP+ ports
OSX040N01 SFP-10G-ZR SFP-10G-USR |
8 | Fan module slot 1 |
3 | One console port | 9 | Fan module slot 2 |
4 | One ETH management port | 10 | Power module slot 1 |
5 | One USB port | 11 | Power module slot 2 |
6 | One PNP button |
Item | S5731S-S24T4X-A |
Memory (RAM) | 4 GB |
Flash | 1 GB in total. To view the available flash memory size, run the display version command. |
Mean time between failures (MTBF) | 57.73 years |
Mean time to repair (MTTR) | 2 hours |
Availability | > 0.99999 |
Service port surge protection | Common mode: ±6 kV |
Power supply surge protection | Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode |
Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode | |
Dimensions (H x W x D) | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) |
Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.) | |
Weight (with packaging) | 9.35 kg (20.61 lb) |
Stack ports | 10GE SFP+ ports on the front panel |
RTC | Supported |
RPS | Not supported |
PoE | Not supported |
Rated voltage range | AC input: 100 V AC to 240 V AC, 50/60 Hz |
High-Voltage DC input: 240 V DC | |
DC input: -48 V DC to -60 V DC | |
Maximum voltage range | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz |
High-Voltage DC input: 190 V DC to 290 V DC | |
DC input: -38.4 V DC to -72 V DC | |
Maximum power consumption (100% throughput, full speed of fans) | 114 W |
Typical power consumption (30% of traffic load, tested according to ATIS standard) | 88 W |
Operating temperature | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) |
NOTE: | |
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). | |
The switch cannot be started when the ambient temperature is lower than 0°C (32°F). | |
Storage temperature | -40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) | < 57.5 dB(A) |
Relative humidity | 5% to 95%, noncondensing |
Operating altitude | 0-5000 m (0-16404 ft.) |
Certification | EMC certification |
Safety certification | |
Manufacturing certification | |
Part number | 02353AHV |
02353AHV-001 |
Reviews
There are no reviews yet.