S6700-48-EI
Huawei S6700-48-EI switch supports 48 GE SFP/10GE SFP+ ports, 2 hot swappable AC/DC power supplies, without power supply equipped
- Description
- DATASHEET
- Packing info
- Download
- Reviews (3)
Description
S6700-48-EI overview
Huawei S6700-48-EI with 48 10GE SFP+ ports, is one of the Huawei S6700 series switches. The S6700 has industry-leading performance and provides up to 24 or 48 line-speed 10 GE ports. It can be used in a data center to provide 10 Gbit/s access to servers or function as a core switch on a campus network to provide 10 Gbit/s traffic aggregation. In addition, the S6700 provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure data centers.
S6700-48-EI appearance and structure
1. Forty-eight 10GE SFP+ ports | 6. ESD jack |
2. One ETH management port | 7. Fan slot 2 |
3. One console port | 8. Fan slot 1 |
4. One USB port | 9. Power module slot 2 |
5. Ground screw | 10. Power module slot 1 |
Item | S6700-48-EI |
Port | 48 GE SFP/10 GE SFP+ ports |
Extended slot | NA |
Forwarding performance | 720Mpps |
Switching capacity | 960Gbps |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN Mapping | |
QinQ and selective QinQ | |
Reliability | STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) |
BPDU protection, root protection, and loop protection | |
RRPP ring topology and RRPP multi-instance | |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP, E-Trunk | |
ERPS(G.8032 v2) | |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM | |
IPv4 routing | Static routing, RIPv1, RIPv2, ECMP, and URPF |
OSPF, IS-IS, and BGP | |
VRRP | |
Policy-based routing | |
Routing policy | |
IPv6 routing | Static route |
RIPng | |
OSPFv3 | |
BGP4+ | |
IPv6 features | Neighbor Discovery (ND) |
Path MTU (PMTU) | |
IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type | |
MLD v1/v2 snooping | |
6to4 tunnel, ISATAP tunnel, and manually configured tunnel | |
Multicast | Static Layer 2 multicast MAC address |
MAC-based multicast forwarding | |
IGMP snooping and IGMP fast leave | |
Multicast VLAN | |
MLD snooping | |
IGMP proxy | |
Controllable multicast | |
Port-based multicast traffic statistics | |
IGMP v1/v2/v3 | |
PIM-SM, PIM-DM, and PIM-SSM | |
MSDP | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID | |
Rate limiting in each queue and traffic shaping on ports | |
MPLS features | MPLS L3VPN |
MPLS L2VPN (VPWS/VPLS) | |
MPLS-TE | |
MPLS QoS | |
Security | DoS attack defense, ARP attack defense, and ICMP attack defense |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense | |
Blacklist and whitelist | |
Management and maintenance | MAC Forced Forwarding (MFF), iStack (using service ports as stack ports) |
Virtual cable test, | |
SNMP v1/v2c/v3, | |
RMON | |
Web-based NMS | |
System logs and alarms of different levels | |
GVRP | |
MUX VLAN | |
Local port mirroring and remote switched port analyzer (RSPAN), allowing an observing port to forward packets | |
Ethernet OAM (IEEE 802.3ah and 802.1ag), sFlow | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Input DC voltage: Rated input voltage range | -48 V DC to -60 V DC |
Input DC voltage: Maximum voltage range | -36 V DC to -72 V DC |
Input AC voltage: Rated input voltage range | 100 V AC to 240 V AC, 50/60 Hz |
Input AC voltage: Maximum voltage range | 90 V AC to 264 V AC, 50/60 Hz |
Operating temperature | Operating temperature: 0-45℃ |
Relative humidity | 5% to 95% (non-condensing) |
Dimensions (W x D x H) | 442mm×420mm×43.6mm |
Power consumption | 240W |
Additional information
Weight | 14.0000 kg |
---|---|
Dimensions | 71.0000 × 55.0000 × 17.5000 cm |
Abel –
S6700-48-EI with 48 GE SFP/10GE SFP+ without power module.
Regout –
But the shipment was wrong, we received DC; fortunately, we didn’t need it urgently and they redelivered AC power ASAP, and this switch works very well.
Jeremy –
This switch supports 48 GE SFP/10GE SFP+ ports. I brought this type of switch one year ago for my clients. So far, it works well well. Good quality.