- Description
- DATASHEET
- Packing info
- Comparison
- Download
- Reviews (0)
Description
S7706 switch overview
S7706 is one of the S7700 series smart switches, and the S7700 series switches are smart routing switches designed for next-generation enterprise networks. The S7700 series switches can offer voice, video, and data services, helping enterprises build routing and switching integrated end-to-end networks.
The S7700 series design is based on Huawei’s intelligent multi-layer switching technology to provide intelligent service optimization methods, such as MPLS VPN, traffic analysis, comprehensive HQoS policies, controllable multicast, load balancing, and security, in addition to high-performance Layer 2 to Layer 4 switching services. The S7700 also features super scalability and reliability.
The S7700 series is available in three models: S7703/S7703-PoE, S7706/S7706-PoE, and S7712. The switching capacity and port density of all three models are expandable. The S7700 is based on a new hardware platform, which adopts a left-to-rear ventilation channel to achieve better energy efficiency. Key components work in redundancy mode to minimize risks of system breakdown and service interruption. Using innovative energy-saving chips, the S7700 provides an industry-leading solution for a sustainable energy-saving network.
The Huawei S7706 switch chassis is 10 U high (1 U = 44.45 mm). When the chassis has no cable management frame installed, the dimensions (H x W x D) are 441.7 mm x 442 mm x 517.4 mm. When the chassis has cable management frames installed, the dimensions (H x W x D) are 441.7 mm x 442 mm x 585 mm.
Please note:
The power supply slots on the S7703, S7706, and S7712 consist of the system power supply slot and PoE power supply slot, which are independent of each other. By installing the appropriate power modules into the PoE power supply slots, the S7703, S7706, and S7712 can provide PoE capabilities.
The S7703-PoE/S7706-PoE differ from the S7703/S7706, because all power supply slots on the S7703-PoE/S7706-PoE are shared by the system power supply and PoE power supply
S7706 appearance
1. Six of the following service cards can be installed:
Note: The cards supported by a switch depend on the software version. For details, see Hardware Query Tool. |
2. Two MPUs | 3. A pair of mounting brackets note: The mounting brackets are used to secure the chassis in the cabinet. |
4. Two power modules | 5. Two EH1D200CMU00-Centralized Monitoring Unit | 6. Four PoE power modules
2200 W AC Power Module |
7. Ground screw | 8. Front ESD jack | 9. Cable management frames |
Item | S7706 |
Forwarding performance | 2880/21120Mpps |
Switching capacity | 16.00/76.80Tbps |
SRU Slot | 2 |
Service Slot | 6 |
Maximum port density | V100R006C00 version: 288×FE,288×GE,72×10GE |
V200R001C00 version: 288×FE,288×GE,240×10GE | |
V200R002C00~V200R007C00 version: 288×FE,288×GE,240×10GE,12×40GE | |
V200R008C00~V200R009C00 version: 288×FE,288×GE,240×10GE,12×40GE,12×100~GE | |
V200R010C00 or later version: 288×FE,288×GE,288×10GE,48×40GE,24×100GE | |
Wireless network | Native AC |
management | AP access control, AP region management, and AP profile management |
Radio profile management, uniform static configuration, and centralized | |
dynamic management | |
Basic WLAN services, QoS, security, and user management | |
Deployment of ACs on different network layers | |
User management | Unified user management |
802.1x, MAC address, and Portal authentication | |
Traffic- and time-based accounting | |
User authorization based on user groups, domains, and time ranges | |
VLAN | Three types of interfaces: access, trunk, and hybrid |
Default VLAN | |
VLAN switching | |
QinQ and selective QinQ | |
MAC address-based VLAN assignment | |
MAC address | MAC address learning and aging. |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
Limit on the number of MAC addresses learned on ports and VLANs | |
Ring Protection | STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) |
SEP | |
BPDU protection, root protection, and loop protection | |
BPDU tunnel | |
ERPS (G.8032) | |
IP routing | IPv4 routing protocols, such as RIPv1/v2, OSPF, BGP, and IS-IS |
IPv6 dynamic routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ | |
Multicast | IGMPv1/v2/v3 and IGMP v1/v2/v3 snooping |
PIM-DM, PIM-SM, and PIM-SSM | |
MSDP and MBGP | |
Fast leave | |
Multicast traffic control | |
Multicast querier | |
Multicast packet suppression | |
Multicast CAC | |
Multicast ACL | |
MPLS | Basic MPLS functions |
MPLS OAM | |
MPLS-TE | |
MPLS VPN/VLL/VPLS | |
Reliability | LACP and E-Trunk between devices |
VRRP and BFD for VRRP | |
BFD for BGP/IS-IS/OSPF/static route | |
NSF and GR for BGP/IS-IS/OSPF/LDP | |
TE FRR and IP FRR | |
ITU-Y.1731 | |
DLDP | |
QoS | Traffic classification based on Layer 2 protocol packet header, Layer 3 protocol |
information, Layer 4 protocol information, and 802.1p priority | |
ACL, CAR, re-mark, and scheduling | |
Queue scheduling algorithms including SP, WRR, DRR, SP+WRR, and SP+DRR | |
Congestion avoidance mechanisms, such as WRED and tail drop | |
H-QoS | |
Traffic shaping | |
Security and management | 802.1x authentication and portal authentication |
NAC | |
RADIUS and HWTACACS authentication | |
Different user levels for commands, preventing unauthorized users from using | |
certain command | |
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, | |
broadcast storms, and heavy traffic attack | |
Ping and traceroute | |
RMON | |
Service Chain | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Power supply | AC:90 V to 290 V |
Dimensions (mm) | 442 mm x 476 mm x 442 mm |
Weight | 15 kg |
Maximum power | 2200 W |
Maximum PoE power | 8800 W |
Additional information
Weight | 50.0000 kg |
---|---|
Dimensions | 63.8000 × 61.2000 × 63.2000 cm |
S7703/S7703-PoE | Number of fan slots: 1
Number of power module slots: − S7703: 2 for system and 1 for PoE − S7703-PoE: 3, shared by both the system and PoE power supplies Port density per chassis: 144 x FE, 144 x GE, 144 x 10GE, 72 x Multi-GE, 36 x 40GE, 24 x 100GE Installation: The switch can be installed in an N66E or N68E cabinet, one cabinet for one chassis. Forwarding performance: 1440 Mpps/3600 Mpps Switching capacity: 1.92 Tbps/4.8 Tbps |
S7706/S7706-PoE | Number of SRU slots: 2
Number of LPU slots: 6 Number of CMU slots: 2 Number of fan slots: 2 Number of power module slots: − S7706: 4 for system and 4 for PoE − S7706-PoE: 8, shared by both the system and PoE power supplies Port density per chassis: 288 x FE, 288 x GE, 288 x 10GE, 144 x Multi-GE, 72 x 40GE, 48 x 100GE Installation: The switch can be installed in an N66E or N68E cabinet, one cabinet for one chassis. Forwarding performance: 3240 Mpps Switching capacity: 4.32 Tbps |
S7712 | Number of SRU slots: 2
Number of LPU slots: 12 Number of CMU slots: 2 Number of fan slots: 4 Number of power module slots: 4 for system and 4 for PoE Port density per chassis: 576 x FE, 576 x GE, 576 x 10GE, 288 x Multi-GE, 144 x 40GE, 96 x 100GE Installation: The switch can be installed in an N66E or N68E cabinet, one cabinet for one chassis. Forwarding performance: 3480 Mpps Switching capacity: 4.64 Tbps |
Reviews
There are no reviews yet.