SSN1EAS2

The OptiX OSN 7500 series SSN1EAS2 is 2-port 10Gigabit Ethernet Switching and Processing Board(10GBASE-LR/LW,1310-LC), 03051791

12 Months

Huawei

SKU: 3982 PN: 03051791 Category:

Description

The OptiX OSN 7500 series SSN3EAS2 is 2-port 10Gigabit Ethernet Switching and Processing Board(10GBASE-LR/LW,1310-LC), 03051791

The EAS2 is available in the following functional versions: N1 and N3.

EAS2 boards support the transmission of 10 GE Ethernet services, LCAS, and test frame functions.

 

Version Mapping

Board Start Version
N1EAS2 V100R008C01
N3EAS2 V200R012C01
Item SSN1EAS2
Basic functions Receives/Transmits 2×10 GE Ethernet services.
Port types Supports 10GBASE-LR and 10GBASE-LW Ethernet optical ports, which comply with IEEE 802.3ae.
Functions when being used with an interface board Provides ports on the front panel.
Port characteristics Working mode 10GE full-duplex in both WAN mode and LAN mode
Traffic control mode at ports Auto-negotiation mode Not supported
Non-autonegotiation mode Supported
Query/Setting of port status Supported
Query of port types Supported
Setting of optical power thresholds Not supported
Pluggable optical module XFP optical modules supported on N1EAS2 boards
SFP+ optical modules supported on N3EAS2 boards
N3EAS2 supports one-fiber bidirectional optical modules.
Service categories Ethernet private line (EPL) service Supports PORT-based transparent transmission.
Ethernet virtual private line (EVPL) service Supports PORT-shared EVPL services.
Supports VCTRUNK-shared EVPL services.
The services are isolated by VLAN tags.
The services are isolated by MPLS tags (supported on N3EAS2 boards).
The services are isolated by QinQ tags.
Supports a maximum of 2048 links in the case of the N1EAS2; supports a maximum of 4096 links in the case of the N3EAS2.
Ethernet private LAN (EPLAN) service Supports a maximum of one virtual bridge (VB) on N1EAS2 boards. The maximum number of logical ports for each VB is 26.
Supports a maximum of one VB on N3EAS2 boards. The maximum number of logical ports for each VB is 19 (slot bandwidth: 10G bit/s) or 36 (slot bandwidth: 20G bit/s)
Supports the blacklist that can contain 512 records and also the static media access control (MAC) address table that can contain 512 records.
Supports the self-learning of the source MAC address. The capacity of the MAC address table is 16K. The aging time of the MAC address can be set and queried.
Supports the configuration of static MAC routes.
Supports the query of the aging time of an MAC address.
Supports the query of learned MAC addresses by VB+VLAN or VB+LP.
Supports EPLAN services that are based on IEEE 802.1d MAC bridges.
Ethernet virtual private LAN (EVPLAN) service Supports EVPLAN services that use stack VLAN encapsulation.
Supports data isolation based on VB+VLAN.
Supports a maximum of one virtual bridge (VB) on N1EAS2 boards. The maximum number of logical ports for each VB is 26.
Supports a maximum of one VB on N3EAS2 boards. The maximum number of logical ports for each VB is 19 (slot bandwidth: 10G bit/s) or 36 (slot bandwidth: 20G bit/s)
Supports EVPLAN services based on IEEE 802.1q virtual bridges and IEEE 802.1ad provider bridges.
Service specifications Formats of Ethernet data frames IEEE 802.3 Supported
Ethernet II Supported
IEEE 802.1 q/p Supported
Frame length range Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
Concatenation granularities The following adjacent concatenation granularities are supported on N1EAS2 boards: VC-4-Xv (X≤8), VC-3-Xv (X≤24), and VC-4-4c.
The following adjacent concatenation granularities are supported on N3EAS2 boards: VC-4-Xv (X≤64) and VC-4-4c/16c/64c.
NOTE:
For N3EAS2 boards, VCTRUNK1 and VCTRUNK18 support VC-4-16c/64c adjacent concatenation. Other VCTRUNKs only support VC-4-4c adjacent concatenation.
N3EAS2 boards support adjacent concatenation only for bidirectional services.
Encapsulation formats HDLC Not supported
LAPS Not supported
GFP-F Supported
MPLS technology Not supported on N1EAS2 boards
Tunnel-based EVPL (transit) supported on N3EAS2 boards
VLAN technology Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
Maximum uplink bandwidth An N1EAS2 board supports a maximum of 10 Gbit/s upstream bandwidth and can adapt to the bandwidth of its slot.
An N3EAS2 board supports a maximum of 20 Gbit/s upstream bandwidth and can adapt to the bandwidth of its slot.
Maximum bound bandwidth N1EAS2: 64xVC-4 or 192xVC-3
N3EAS2: 128xVC-4
VCTRUNK specifications An N1EAS2 board supports a maximum of 24 VCTRUNKs.
Configuration guidelines are as follows:
Each VC channel can be bound only to one VCTRUNK.
A VCTRUNK can be bound with a maximum of 8 VC-4s or a maximum of 24 VC-3s.
A VCTRUNK can be bound only with VC-4 paths or VC-3 paths. Different VCTRUNKs, however, can be bound with paths at different levels.
N1EAS2 boards support VC-4-4c adjacent concatenation and VC-3/VC-4 virtual concatenation.
Only VCTRUNKs numbered 1-4 support the Jumbo frame with a length of 9600 bytes. The other VCG ports do not support the Jumbo frame.
The maximum number of VCTRUNKs supported by the N3EAS2 board is as follows:
If the slot bandwidth is 10 Gbit/s, the maximum number is 17 (VCTRUNK1 to VCTRUNK17).
If the slot bandwidth is 20 Gbit/s, the maximum number is 34 (VCTRUNK1 to VCTRUNK34).
Configuration guidelines are as follows:
Each VC channel can be bound only to one VCTRUNK.
VCTRUNK 1 and VCTRUNK 18 can be bound with a maximum of 64 VC-4s, and other VCTRUNKs can be bound with a maximum of 8 VC-4s.
VCTRUNK 1 to VCTRUNK 17 can be bound only with VC-4-1 to VC-4-64, and VCTRUNK 18 to VCTRUNK 34 can be bound only with VC-4-65 to VC-4-128.
Protection schemes TPS Not supported
BPS Not supported
PPS Not supported
DLAG Supported
LAG Supports manual link aggregation and static link aggregation.
Supports the load sharing mode and load non-sharing mode.
Complies with IEEE 802.3ad and IEEE 802.1AX.
LCAS Supports LCAS, which dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
LPT Supports P2P LPT and P2MP LPT in compliance with Huawei proprietary protocol.
STP/RSTP Supports the broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.
MSTP Not supported on N1EAS2 boards
Supported on N3EAS2 boards
Ethernet ring protection switching (ERPS) Not supported on N1EAS2 boards
Supported on N3EAS2 boards
NOTE:
ERPS does not support the following bridges:
IEEE 802.1d bridge
IEEE 802.1ad bridge with SVL/ingress filter disabled
Synchronization Synchronous Ethernet Not supported
IEEE 1588v2 Not supported
Maintenance features ETH OAM Supports CC, LB tests, and LT tests in compliance with IEEE 802.1ag, and OAM ping in compliance with Huawei proprietary protocol.
Supports OAM auto-discovery, remote loopbacks, fault detection, and link performance detection in compliance with IEEE 802.3ah, and selfloop detection in compliance with Huawei proprietary protocol on N3EAS2 boards.
Test Frame Supports test frames in ETH and GFP bearer modes.
Response to ping Supported
Port Mirroring Supports ingress and egress mirroring.
Loopback capability PHY layer at Ethernet ports Supports inloops.
MAC layer at Ethernet ports Supports inloops.
VC-4 level Not supported
VC-3 level Not supported
VC-12 level Not supported
RMON Supports Ethernet performance monitoring at the port level.
Supports the query of the rate of a port.
Reports an alarm when the volume of traffic at a port exceeds the threshold (this function is available on N3EAS2 boards).
Warm resets Supported (Warm resets do not affect services.)
Cold resets Supported
Alarms and performance events Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
QoS Supports traffic classification based on PORT, PORT+VLAN, PORT+VLAN+VLAN PRI, PORT+SVLAN, PORT+SVLAN+CVLAN, MPLS labels, or MPLS label+EXP value.
Supports the CAR. The granularity is 64 kbit/s.
Each port supports eight priority queues.
Supports shaping based on ports or queues.
IGMP Snooping Protocol enabling Supported
Port aging time Supported
Fast leave Not supported
Discarding of unknown broadcast packets Not supported
Static broadcast entry Supported
Hub/Spoke Supported
Traffic control Supports the port-based traffic control function that complies with IEEE 802.3x.
NOTE:
Only EPL services support port-based traffic control.

Power Consumption

The maximum power consumption of the N1EAS2 is 70 W at room temperature (25°C). 

The maximum power consumption of the N3EAS2 is 83 W at room temperature (25°C).

Dimensions (mm) 25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg)
  • N1EAS2: 1.2
  • N3EAS2: 1.1

2 reviews for SSN1EAS2

  1. 5 out of 5

    Krishneel

    Brand new SSN1EAS2, Telecomate.com provides one year warranty.

  2. 5 out of 5

    Joaquín

    Very professional technical service, which helps our distributors a lot, and the end customer also relies on me more


Add a review

has been added to your cart:
Checkout