Name: SSRDPCXL1614
SKU: 4415
Availability: InStock
Rating: 5.00 (1 reviews)

SSRDPCXL1614

5.00 out of 5

1 customer review|Add a review

Huawei OSN 1500B STM-16 SCC unit, Clock and Line units, Integrated Cross-connect Board,STM-16 2.5G line board with 1 S-16.1 15km SFP module

SKU: 4415 Categories: Huawei Transport Network, OSN1500B/OSN2500

Description
DATASHEET
Packing info
Reviews (1)

Description

SSRDPCXL1614 Version Description

The PCXLN is available in one functional version, namely, R1.

Version Mapping

Board	Start Versiona
R1PCXLN	V100R009C03
a: If there is a replacement relationship between boards, the start version of the replaced board prevails. For example, on the OptiX OSN 3500, if an N3EAS2 board can replace an N1EAS2 board, the N3EAS2 board can be used in V100R008.

SSRDPCXL1614 Board Updates

This section describes the hardware updates in V200R013C30 and later versions as well as the reasons for the updates. Any product versions that are not listed in the document means that they have no hardware updates.

SSRDPCXL1614 Application

The PCXLN provides service processing, service grooming, clock input/output, and communication control functions in the OptiX OSN 1500 system.

The board provides the other boards in the system with the timing information, converges and grooms services, communicates with the other boards in the system, and performs the configuration and management functions for the other boards in the system.

SSRDPCXL1614 Functions and Features

The PCXLN processes SDH signals, controls communication, grooms services, and inputs/ outputs clock signals.

SDH Processing Unit

Function and Feature	Description
Basic functions	Transmits and receives 1xSTM-1/STM-4/STM-16 optical signals.
Specifications of the optical interface	The STM-1/STM-4/STM-16 optical module can be used. At the STM-1 level, the standard S-1.1, L-1.1, and L-1.2 optical interfaces are supported. The optical interfaces of S-1.1, L-1.1, and L-1.2 types comply with ITU-T G.957. At the STM-4 level, the standard S-4.1, L-4.1, L-4.2, and Ve-4.2 optical interfaces are supported. The optical interfaces of the S-4.1, L-4.1, and L-4.2 types comply with ITU-T G.957, and the optical interface of the Ve-4.2 type complies with the standards defined by Huawei. At the STM-16 level, the standard I-16, S-16.1, L-16.1, and L-16.2 optical interfaces are supported. Supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km.
Specifications of the optical module	Supports the detection and query of the information about the optical module. Provides the ALS function. The optical interface supports the setting of the on/off state of a laser. Supports the pluggable optical modules, facilitating the maintenance and upgrade of the optical modules.
Service processing	The STM-1 module supports the VC-12/VC-3/VC-4 services. The STM-4 module supports the VC-12/VC-3/VC-4 and VC-4-4c concatenation services. The STM-16 module supports the VC-12/VC-3/VC-4 and VC-4-4c/VC-4-8c/VC-4-16c concatenation services.
Overhead processing	Processes the section overheads of the STM-1/STM-4/STM-16 signals. Supports the transparent transmission and termination of the path overheads and supports the setting and query of the J0, J1, and C2 bytes.
Alarm and performance event	Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Protection scheme	Two-fiber ring MSP Four-fiber ring MSP Linear MSP SNCP SNCMP SNCTP
Maintenance feature	Supports inloops and outloops at optical interfaces. Supports the warm reset and cold reset. The warm reset does not affect services. When a warm reset is performed on the working cross-connect and system control board, an active/standby switching occurs on the board. Supports the query of the manufacturing information of the board. Supports the in-service loading of the FPGA. Supports the upgrade of the board software without affecting services. Supports the PRBS function in the line direction.

SCC Unit

Function and Feature	Description
Basic functions	Configures and monitors services, monitors the service performance, and collects the information about the performance events and alarms.
Specifications of the optical interface	Provides one 10M/100M compatible Ethernet NM interface, which is accessed through the AUX board. Provides one 10M/100M Ethernet port, which is used for implementing the inter-board communication and is accessed through the AUX board. Provides one 10M Ethernet port, which is used for implementing the communication between the active and standby SCC boards. Provides the RS232 OAM interface, which is accessed through the AUX board and is used for connecting a PC or workstation. Supports the remote maintenance by using the RS232 DCE modem. Supports the receiving of the check result of the NE ID and provides the interface for querying the check result. Provides one orderwire interface, which is accessed through the EOW board. Provides two broadcast data ports (serial1-2), which are accessed through the EOW board.
DCC processing capability	Processes a maximum of 80 channels of DCC signals (D1-D3).
Fan alarm management	Manages fan alarms.
PIU management	Supports the in-service check function for the PIU board and supports the failure check function for the lightning protection module of the PIU.
Protection scheme	Supports 1+1 hot backup.

Cross-Connect Unit

Function and Feature	Description
Basic functions	Cross-Connect Capacity		PCXLN
	Higher order cross-connect capacity (Gbit/s)		60
	Lower order cross-connect capacity (Gbit/s)		20
	Packet switching capacity (Gbit/s)		8
	Service access capacity	TDM mode (Gbit/s)	15
	Service access capacity	Packet mode (Gbit/s)	8
Service processing	Dynamically grooms services. Adds or deletes services without interrupting other services. Supports the SNCP protection at the VC-4-4c, VC-4-8c, VC-4-16c, VC-4-64c, VC-4, VC-12, VC-3, and AU-3 levels. Supports a maximum of 12 linear MSP groups. Supports a maximum of 12 ring MSP groups. Supports a maximum of 1184 SNCP groups. Supports a maximum of 592 SNCMP groups. Supports a maximum of 512 SNCTP groups. The STM-16 optical module supports the VC-4-4c, VC-4-8c, and VC-4-16c concatenation services.
Protection scheme	Supports the 1+1 hot backup (non-revertive, by default).

Clock Unit

Function and Feature	Description
Basic functions	Provides the standard system synchronization clock.
Other functions	Supports the extraction, insertion, and management of the SSM and clock ID. Supports the transmission of the DCC overhead information at two external clock interfaces. Supports the transmission of two channels of clock signals through the S1 to S4 interfaces on the EOW. The S1 and S3 interfaces receive the first channel of time information, and the S2 and S4 interfaces receive the second channel of time information. Supports frequency deviation detection.
Input and output	Through the AUX board:Inputs/Outputs two-channel 2 MHz or 2048 kbit/s timing signals (120-ohm) and allows selection of external timing sources.Through the PIU board:Inputs/Outputs two-channel 2 MHz or 2048 kbit/s timing signals (75-ohm) and allows selection of external timing sources.

SSRDPCXL1614 Working Principle and Signal Flow

The PCXLN consists of the SDH processing module, SCC module, cross-connect module, packet processing module, clock module, and power module

SSRDPCXL1614 Valid Slots

The PCXLN can be installed in slots 4 and 5 in the subrack. By default, slot 4 is the slot for the working board, and slot 5 is the slot for the protection board.

SSRDPCXL1614 Displayed Slots

The PCXLN occupies one slot in the subrack. The logical boards for the PCXLN are the Q2SLN, PCXL, and GSCC.

Board	Logical Board	Logical Slot
PCXLN	Q2SLN	Slot 4 or 5
	PCXL	Slot 80 or 81
	GSCC	Slot 82 or 83

SSRDPCXL1614 Feature Code

The number code that follows the board name in the bar code is the feature code of the board. The feature code indicates the type of optical interface.

Board	Feature Code	Type of Optical Interface
SSR1PCXLL1601	1601	I-16
SSR1PCXLL1602	1602	S-16.1
SSR1PCXLL1603	1603	L-16.1
SSR1PCXLL1604	1604	L-16.2
SSR1PCXLL401	401	S-4.1
SSR1PCXLL402	402	L-4.1
SSR1PCXLL403	403	L-4.2
SSR1PCXLL404	404	Ve-4.2
SSR1PCXLL110	110	S-1.1
SSR1PCXLL111	111	L-1.1
SSR1PCXLL112	112	L-1.2

Technical Specifications of the PCXLN

The technical specifications of the PCXLN include the parameters specified for optical interfaces, laser safety class, mechanical specifications, and power consumption.

Parameters Specified for Optical Interfaces

The PCXLN supports the STM-1, STM-4, and STM-16 optical modules.

Port type	Description
S-1.1	15 km STM-1 two-fiber bidirectional optical interfaces
L-1.1	40 km STM-1 two-fiber bidirectional optical interfaces
L-1.2	80 km STM-1 two-fiber bidirectional optical interfaces
S-4.1	15 km STM-4 two-fiber bidirectional optical interfaces
L-4.1	40 km STM-4 two-fiber bidirectional optical interfaces
L-4.2	80 km STM-4 two-fiber bidirectional optical interfaces
Ve-4.2	100 km STM-4 two-fiber bidirectional optical interfaces
I-16	2 km STM-16 two-fiber bidirectional optical interfaces
S-16.1	15 km STM-16 two-fiber bidirectional optical interfaces
L-16.1	40 km STM-16 two-fiber bidirectional optical interfaces
L-16.2	80 km STM-16 two-fiber bidirectional optical interfaces
80 km CWDM	80 km CWDM optical interfaces
120 km DWDM	120 km DWDM optical interfaces

Laser Safety Class

The safety class of the laser on the board is Class 1. The maximum launched optical power of the optical interfaces is less than 10 dBm (10 mW).

Mechanical Specifications

The mechanical specifications of the PCXLN are as follows:

Dimensions (mm): 25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg): 1.0

Power ConsumptionThe maximum power consumption of the PCXLN at room temperature (25°C) is 60 W.

Optical Interface Parameter
Parameter	Value
Higher order cross-connect capacity	60 Gbit/s
Lower order cross-connect capacity	20 Gbit/s
Access capacity	15Gbit/s
Nominal bit rate	2488320 kbit/s
Line code pattern	NRZ
Application code	S-16.1
Transmission distance (km)	2 to 15
Type of fiber	Single-mode LC
Operating wavelength range (nm)	1260 to 1360
Launched optical power range (dBm)	-5 to 0
Receiver sensitivity (dBm)	-18
Minimum overload (dBm)	0
Minimum extinction ratio (dB)	8.2
Maximum -20 dB spectral width (nm)	1
Minimum side mode suppression ratio (dB)	30
Mechanical Speifications
Dimensions (mm)	25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg)	1.0

Additional information

Weight	3.0000 kg
Dimensions	37.5000 × 34.0000 × 7.5000 cm

1 review for SSRDPCXL1614

5 out of 5

Petteri – 2020-06-03

First time for purchasing at Telecomate.com, good service about the test report and good package!

Huawei, ZTE, Nokia, Alcatel Lucent, Fiberhome Network Hardware Store

SSRDPCXL1614