TNG1N401

Huawei OptiX OSN 9800 TNG1N401 1*100 Gbit/s Line Service Processing Board

Huawei

3-5 days

Shenzhen Warehouse

Category:

Description

TNG1N401 overview

Huawei OptiX OSN 9800 TNG1N401 1 x 100 Gbit/s Line Service Processing Board.

As an OTN line board, the N401 board converts 80 ODU0, 40 ODU1, 10 ODU2, 10 ODU2e, 2 ODU3, 1 ODU4, or 80 ODUflex signals into one OTU4 signal carried over an ITU-T G.694.1 compliant DWDM wavelength, and vice versa. Each port on the board supports a mix of ODU0, ODU1, ODU2/ODU2e, ODU3, and ODUflex signals. The N401 board uses coherent detection technology and is targeted for coherent communications.

Appearance of the TNG1N401

TNG1N401

Valid slots
Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M05 1 IU1, IU2, IU3, IU4, IU5 IU1, IU2, IU3, IU4, IU5
OptiX OSN 9800 M12 1 IU1 to IU13 IU1 to IU13
OptiX OSN 9800 M24 1 IU1 to IU24 IU1 to IU24
Item

TNG1N401

Backplane capacity The total backplane bandwidth is 100 Gbit/s.
WDM specification Supports the DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding
  • T51/T61/T5U/T62/T65/T69HP/T65HP/T50/T51HP/T52/T53/T63/T52HP/T53HP/T63HP/T61HP/F51/A51/A62: SDFEC2
  • Gray-light modules: FEC
Line modulation format
  • NRZ
  • 100G QPSK
  • 100G QPSK wDCM
OTN overhead protocol Supports the OTN frame format and overhead processing defined by ITU-T G.709.
OTN overhead
  • WDM-side OTU4 layer: supports SM overhead processing.
  • ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing.
  • ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports non-intrusive monitoring of PM and TCM overheads.
Intra-board 1+1 protection Supported

NOTE:

Supports intra-board 1+1 protection when working with optical protection boards.

ODUk SNCP Supported
Tributary SNCP Supported

NOTE:

When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.
Electrical-layer ASON Supported
Optical-layer ASON Supported

NOTE:

In versions earlier than V100R007C00SPC500, ASON is not supported in high SOP mode. In V100R007C00SPC500 and later versions, only ASON without optical parameters is supported in high SOP mode.
Physical clock Supported
IEEE 1588v2 Not supported
Outband DCN Supports communication over ESCs.
Test frame Not supported
PRBS Supports the PRBS function on the WDM side.
Delay measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction). When higher-order ODUk cross-connections are created on the line board, TCM section latency measurement is supported for higher-order ODUk channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM section latency measurement is supported for higher-order ODUk channels, and TCM section latency measurement is supported for lower-order ODUk channels.
Channel loopback ODUk (k=0, 1, 2, 3, flex) channel loopbacks
Port loopback Supports WDM Side Loopback
Alarm and performance event monitoring
  • Supports the monitoring of BIP8 bytes (Bursty mode) to help locate line faults.
  • Supports the monitoring of the laser bias current.
  • Supports the laser temperature monitoring.
  • Supports the optical power monitoring.
  • Supports the monitoring of OTN alarms and performance events.

Mechanical Specifications

Board Item Unit Value
TNG1N401 Dimensions (H x W x D) mm 237.10×30.50×220.00
Dimensions (H x W x D) in. 9.34×1.20×8.67
Weight kg 1.7
Weight lb. 3.75
Typical Power Consumption (Regeneration mode) W 85
Typical Power Consumption (Line mode, and use the LR4 module) W 66
Typical Power Consumption (Line mode, and use the other module) W 87
Maximum Power Consumption (Regeneration mode) W 94
Maximum Power Consumption (Line mode, and use the LR4 module) W 73
Maximum Power Consumption (Line mode, and use the other module) W 96

1 review for TNG1N401

  1. 5 out of 5

    Volker

    We well received TNG1N401 very fast.


Add a review

has been added to your cart:
Checkout