TNM1EM6T

Huawei OSN500 TNM1EM6T processing board supports 1 GE/FE port

Huawei

SKU: 2014957 Category:

Description

TNM1EM6T Overview

Huawei OSN500 TNM1EM6T processing board supports 1 GE/FE port

The functional version of the EM6T/EM6F is TNM1.

 

TNM1EM6T Functions and Features

The EM6T/EM6F receives/transmits and processes four FE signals and two GE signals.

EM6T/EM6F boards do not have any DIP switches or jumpers.

 

TNM1EM6T Valid Slots

The EM6T/EM6F can be inserted in slots 3 and 4. The slot allocation priority is as follows: slot 4 > slot 3. The logical slots of the EM6T/EM6F on the NMS are the same as its physical slots.

 

TNM1EM6T Technical Specifications

This section describes the board specifications, including the port performance, dimensions, weight, and power consumption.

 

Mechanical specifications of the EM6T/EM6F

Item Performance
Dimensions (H x W x D) 19.8 mm x 193.8 mm x 205.9 mm
Weight
  • EM6T: 0.37 kg
  • EM6F: 0.40 kg
Typical power consumption
  • EM6T: 10.4 W
  • EM6F: 11.3 W
Maximum power consumption
  • EM6T: 11.0 W
  • EM6F: 11.7 W

Ethernet performance specifications of the FE electrical ports

Item Performance
Frame Length (Bytes) Throughput (pks/sec) Latency (us) Packet Loss Ratio (%) Back-to-Back (Frames)
64.00 148810.00 12.80 0.00 744050.00
128.00 84459.00 17.90 0.00 422295.00
256.00 45290.00 28.00 0.00 226450.00
512.00 23496.00 48.40 0.00 117480.00
1024.00 11973.00 89.40 0.00 59865.00
1280.00 9615.00 109.80 0.00 48075.00
1518.00 8126.00 129.00 0.00 40635.00
2000.00 6188.00 167.50 0.00 30940.00
9600.00 1299.00 773.10 0.00 6459.00

 

Ethernet performance specifications of the FE optical ports

Item Performance
Frame Length (Bytes) Throughput (pks/sec) Latency (us) Packet Loss Ratio (%) Back-to-Back (Frames)
64.00 148810.00 44.90 0.00 744050.00
128.00 84459.00 65.90 0.00 422295.00
256.00 45290.00 106.50 0.00 226450.00
512.00 23496.00 182.20 0.00 117480.00
1024.00 11973.00 241.10 0.00 59865.00
1280.00 9615.00 269.20 0.00 48075.00
1518.00 8126.00 292.20 0.00 40635.00
2000.00 6188.00 341.90 0.00 30940.00
9600.00 1299.00 1133.30 0.00 6459.00

 

Ethernet performance specifications of the GE electrical ports

Item Performance
Frame Length (Bytes) Throughput (pks/sec) Latency (us) Packet Loss Ratio (%) Back-to-Back (Frames)
64.00 1488095.00 7.00 0.00 7440475.00
128.00 844595.00 7.40 0.00 4222975.00
256.00 452899.00 8.40 0.00 2264495.00
512.00 234962.00 10.60 0.00 1174810.00
1024.00 119732.00 14.70 0.00 598660.00
1280.00 96154.00 17.00 0.00 480770.00
1518.00 81274.00 18.90 0.00 406370.00
2000.00 61881.00 22.60 0.00 309405.00
9600.00 12994.00 83.40 0.00 64970.00

 

Ethernet performance specifications of the GE optical ports

Item Performance
Frame Length (Bytes) Throughput (pks/sec) Latency (us) Packet Loss Ratio (%) Back-to-Back (Frames)
64.00 1488095.00 9.00 0.00 7440475.00
128.00 844595.00 11.80 0.00 4222975.00
256.00 452899.00 17.30 0.00 2264495.00
512.00 234962.00 25.00 0.00 1174810.00
1024.00 119732.00 29.20 0.00 598660.00
1280.00 96154.00 31.30 0.00 480770.00
1518.00 81274.00 33.40 0.00 406370.00
2000.00 61881.00 37.40 0.00 309405.00
9600.00 12994.00 98.00 0.00 64970.00
Function and Feature Board
EM6T EM6F
Basic functions Receives/Transmits FE/GE service signals and works with the packet switching unit to process the received FE/GE service signals.
Backplane bus bandwidth 2.5 Gbit/s
Port specifications FE electrical port Provides four 10/100BASE-T(X) ports.
FE optical port
  • GE ports can function as FE optical ports if pluggable FE optical modules are used. The following types of FE optical ports are supported: 100BASE-BX/100BASE-FX/100BASE-LX/100BASE-VX/100BASE-ZX
  • The following types of small form-factor pluggable (SFP) modules are supported:
    • FE two-fiber bidirectional pluggable optical module
    • FE single-fiber bidirectional pluggable optical module
GE port Provides two fixed ports:

  • 10/100BASE-T(X)
  • 1000BASE-T
  • Provides two GE ports by using SFP modules of any of the following types: 1000BASE-SX/1000BASE-LX/1000BASE-VX/1000BASE-ZX/1000BASE-T
  • The following types of SFP modules are supported:
    • GE two-fiber bidirectional pluggable optical module
    • GE single-fiber bidirectional pluggable optical module
    • GE pluggable electrical module
  • A GE optical port can be a colored CWDM optical port. A colored CWDM optical port supports a transmission distance of 40 km or 80 km.
Port attributes Working mode
  • The FE electrical port supports 10M full-duplex, 10M half-duplex, 100M full-duplex, 100M half-duplex, and auto-negotiation.
  • The FE optical port supports 100M full-duplex.
  • The GE electrical port supports 10M full-duplex, 10M half-duplex, 100M full-duplex, 100M half-duplex, 1000M full-duplex, and auto-negotiation.
  • The GE optical port supports 1000M full-duplex and auto-negotiation.
TAG attributes
  • The TAG attribute can be set to tag aware, access, or hybrid.
Traffic control at ports Supports the port-based traffic control function that complies with IEEE 802.3x.
Port type query Supported
Query and setting of optical power thresholds Not supported Supported
Packet services E-Line services
  • Native ETH services:
    • E-Line services based on point-to-point transparent transmission
    • E-Line services based on virtual local area networks (VLANs)
    • E-Line services based on 802.1Q in 802.1Q (QinQ)
  • ETH pseudo wire emulation edge-to-edge (PWE3) services: E-Line services carried by PWs (VPWS services)
E-LAN services
  • Native ETH services:
    • E-LAN services based on IEEE 802.1d bridges
    • E-LAN services based on IEEE 802.1q bridges
    • E-LAN services based on IEEE 802.1ad bridges
  • ETH PWE3 services: E-LAN services carried by PWs (virtual private LAN services [VPLSs])
  • MAC address learning modes:
    • Independent VLAN learning (IVL) and shared VLAN learning (SVL) for native Ethernet services
    • SVL for VPLS services
Ethernet data frame format IEEE 802.3/Ethernet II
Jumbo frame Supports a jumbo frame with a maximum length of 9600 bytes.
MFL Ranges from 960 bytes to 9600 bytes, with 1620 bytes being the default value.
Protection schemes Tunnel automatic protection switching (APS) Supports 1:1 tunnel APS.
Pseudo wire (PW) APS/FPS Supports 1:1 PW APS and 1:1 PW FPS.
MPLS-TP ring protection switching (MRPS)

Supports MRPS.

  • Protection group type: two-fiber bidirectional
  • Switching type: wrapping switching
Multiple Spanning Tree Protocol (MSTP) Supports MSTP that runs only Common and Internal Spanning Tree (CIST) instances. This type of MSTP provides the same functions as the Rapid Spanning Tree Protocol (RSTP).
Ethernet ring protection switching (ERPS) Supports ERPS that complies with ITU-T G.8032/Y.1344.
Link aggregation group (LAG)
  • Aggregation types: manual aggregation and static aggregation
  • Load sharing modes: load sharing and non-load sharing
Link-state pass through (LPT) Point-point and point-multipoint LPT
Quality of service (QoS)
  • DiffServSupports simple traffic classification by specifying PHB service classes for service flows based on their QoS information (including C-VLAN priorities, S-VLAN priorities, DSCP values, and MPLS EXP values) carried by packets.
  • Complex traffic classificationSupports complex traffic classification based on C-VLAN IDs, S-VLAN IDs, C-VLAN priorities, S-VLAN priorities, C-VLAN IDs + C-VLAN priorities, S-VLAN IDs + S-VLAN priorities, source MAC addresses, destination MAC addresses, IP protocol types, ETH protocol type, extended IP protocol type, or DSCPs carried by packets at ingress Ethernet ports or V-UNIs.
  • QoS policiesSupports port policies and V-UNI ingress policies.
  • Access control list (ACL)Passes or discards packets in a flow that matches rules specified by a port policy or V-UNI ingress policy.
  • CARProvides the CAR function for traffic flows at ingress ports and V-UNIs.
  • ShapingProvides traffic shaping for a specific port, ingress PW, prioritized queue, or traffic flow.
  • Congestion managementSupports tail drop and WRED dropping.
  • Queue scheduling policiesSupports SP, WRR, and SP+WRR.
Maintenance features Multiprotocol Label Switching (MPLS)/Multiprotocol label switching transport profile (MPLS-TP) operation, administration and maintenance (OAM)
  • Tunnel OAM and PW OAM are supported.
  • MPLS OAM supports connectivity verification (CV), fast failure detection (FFD), ping, and traceroute tests in compliance with ITU-T Y.1711.
  • MPLS-TP OAM supports continuity checks (CCs), remote defect indication (RDI), alarm indication signal (AIS) insertion, loopback (LB) tests, linktrace (LT) tests, loss measurement (LM) (only PW-based single-ended LM), two-way delay measurement (DM), locked signal function (LCK) (The LCK for PWs and bidirectional tunnels is supported), test (TST) (only packet loss ratio test supported), PW Client Signal Fail (CSF) indication in compliance with ITU-T G.8113.1.
Ethernet OAM (ETH OAM)
  • Ethernet service OAM:
    • Supports CCs, LB tests, LT tests, and AIS insertion in compliance with IEEE 802.1ag.
    • Implements IEEE 802.1ag-based LM and DM with reference to ITU-T Y.7131.
  • Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, remote loopbacks, and selfloop checks in compliance with IEEE 802.3ah.
Inloops at the physical PHY/MAC layer of Ethernet ports
Warm resets and cold resets (with warm resets having no impact on services)
Board power consumption query
Board voltage detection
Board temperature detection
SFP module information query
Ethernet performance monitoring (remote network monitoring [RMON])
Hot board swapping
Hot swapping for pluggable optical modules
Port mirroring
  • Supports local port mirroring.
  • Supports mirroring in the egress direction of a UNI port.
  • Supports mirroring in the ingress direction of UNI and NNI ports.
  • Supports mirroring of PORT+VLAN services in the ingress direction of a UNI port.
  • Supports Port + traffic classification mirroring.
Synchronization Synchronous Ethernet Transmits synchronous Ethernet clock signals at six ports.

NOTE:

SFP electrical modules do not support synchronous Ethernet clocks.

When working in 10BASE-T mode, FE/GE ports do not support synchronous Ethernet clocks.

Data communication network (DCN) Each port provides one inband DCN channel.
Link Layer Discovery Protocol (LLDP) Supported
Internet Group Management Protocol (IGMP) snooping Supported

Reviews

There are no reviews yet.


Be the first to review “TNM1EM6T”

has been added to your cart:
Checkout