TNS5NP800SE

Huawei OptiX OSN 9800 TNS5NP800SE 1 x 400G PID Line Service Processing Extended Board(Single-fiber bidirectional)

Huawei

In Stock

Shenzhen Warehouse

12 Months

SKU: 2016462 Category:

Description

TNS5NP800SE overview

 

TNS5NP800SE 1 x 400G PID Line Service Processing Extended Board applied to Huawei OptiX OSN 9800 U64/U32/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

 

 

Front panel of the TNS5NP800SE board

TNS5NP800S

Front panel of the TNS5NP800SE board

 

Valid slots for the TNS5NP800SE board in a U64/U32/M24 subrack

Product Valid Slots
OptiX OSN 9800 U64 Standard subrack IU1–IU64
OptiX OSN 9800 U64 Enhanced subrack IU1–IU64
OptiX OSN 9800 U32 Standard subrack IU1–IU32
OptiX OSN 9800 U32 Enhanced subrack IU1–IU32
OptiX OSN 9800 M24 subrack (IU1, IU13), (IU2, IU14), …, (IU11, IU23), (IU12, IU24)
Item TNS5NP800S
Basic function NP800S/NP800SE:

  • 320 x ODU0/160 x ODU1/40 x ODU2/40 x ODU2e/8 x ODU3/4 x ODU4/ODUflex (1.25Gbit/s x 320)<->4 x ODU4<->1 x ODUC4<->1 x OTUC4
  • 2 x 2000 x OSUflex<->320 x ODU0/160 x ODU1/40 x ODU2/8 x ODU3/4 x ODU4/ODUflex (1.25Gbit/s x 320)<->4 x ODU4<->1 x ODUC4<->1 x OTUC4

NP800S:

  • Multiplexes and demultiplexes two optical signals. That is, it can receive one channel of OTUC4 optical signals from the NP800SE board. In addition, it integrates one channel of OTUC4 optical signals output by itself and one channel of OTUC4 optical signals output by the NP800SE board into one channel of multiplexed optical signals.

NOTE:

  • The board supports single-fiber bidirectional transmission.
  • ODU0/ODUflex (1 x 1.25G) supports a maximum of 500 OSUflex sub-channels, and other ODUk supports a maximum of 2000 OSUflex channels.
  • ODU4 (1-2) and ODU4 (3-4) support a maximum of 2000 OSUflex sub-channels, respectively.
  • When the transmission granularity is only ODUk, the TNS5NP800S can be interconnected with the U1NP800S.
  • When the transmission granularity is ODUk/VC and the SDH capacity of each OTUC4 is less than 40 Gbit/s, the TNS5NP800S can be interconnected with the TNS3NP800S.
Cross-connect capabilities Supports the cross-connection of 2x1000xOSUflex/320xODU0/160xODU1/40xODU2/40xODU2e/8xODU3/4xODU4/320xODUflex signals between the NP800S/NP800SE and cross-connect board.
OTN function
  • Supports the OTN frame format and overhead processing defined by ITU-T G.709.
  • OTUC4 layer: Supports SM overhead processing.
  • ODUC4 layer: Supports PM and TCM overhead processing.
  • ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: Supports PM and TCM overhead processing, and non-intrusive monitoring of PM and TCM overheads.
  • OSUflex layer: Supports PM and TCM overhead processing and non-intrusive monitoring of PM and TCM overheads.
OSU function Supported

NOTE:

The OSU function requires a license.

WDM specifications Supports DWDM specifications.
ESC function Supported
PRBS function Supports the PRBS function on the WDM side.
FEC coding SDFEC
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors the laser bias current, laser operating temperature, and single-wavelength optical power.
  • Monitors OTN alarms and performance events.
Latency measurement The board supports latency measurement in the WDM-side optical port direction (upstream direction).

  • When higher-order ODU4 cross-connections are created on the line board, TCM latency measurement is supported for higher-order ODU4 channels. When lower-order ODUk cross-connections are created on the line board, PM/TCM latency measurement is supported for higher-order ODU4 channels, and TCM latency measurement is supported for lower-order ODUk channels.
  • The board supports PM and TCM latency measurement at the ODUCn layer.
  • The board supports PM latency measurement for OSUflex channels.

    NOTE:

    In OSU application scenarios, only bidirectional latency measurement is supported, and unidirectional latency measurement is not supported.

IEEE 1588v2 Supported
Physical clock Supported
ITU-T G.8275.1 Supported
Optical-layer ASON Not supported
Electrical-layer ASON Supported

NOTE:

In OSU application scenarios, electrical-layer ASON is not supported.

Protection scheme
  • Supports ODUk SNCP.
  • Supports OSUflex SNCP.
  • Supports tributary SNCP.

    NOTE:

    • When the board works with the TNU2CTU/TNG1CXP board, the board supports a maximum of 1024 OSUflex SNCP protection groups.
    • When the board is configured with the TNU4CTU/TNU5CTU/TNG3CXP/TNG4CXP, the board supports a maximum of 2048 OSUflex SNCP protection groups.
Loopback
  • Supports WDM-side loopback.
  • Supports OSUflex channel loopback.
  • Supports ODUk (k=0, 1, 2, 2e, 3, 4, flex) channel loopback.

NOTE:

The board supports concurrent loopbacks of a maximum of eight OSUflex channels.

Backplane capacity 2 x 40 Gbit/s
Overhead processing
  • Processes section overheads of STM-16/STM-64 signals.
  • Transparently transmits and terminates path overheads.
  • Supports setting and query of J0, J1, and C2 bytes.
  • Supports ECC communication.
  • Supports DCC transparent transmission.
Protection scheme
  • Supports SNCP.
  • Supports 1+1 single-ended linear MSP.
  • Supports ring multiplex section protection (RMSP).
Alarms and performance events monitoring
  • Monitors B1, B2 bytes to help locate faults.
Service processing Supports VC-12, VC-3, VC-4, VC-4-4c, VC-4-16c, and VC-4-64c services. (VC-4-4c, VC-4-16c, and VC-4-64c services are concatenation services.)
Loopback Supports VC loopbacks.

Supports virtual port loopbacks.

SDH clock synchronization Supported
Outband DCN Supported
SDH ASON Supported
2M ASON Supported only by 9800 M24 subracks.
Dimensions (H x W x D)
  • 477.30 × 30.50 × 220.00 (mm)
  • 18.81 × 1.20 × 8.67 (in.)
Weight
  • 4.02 kg
  • 8.86 lb.

Reviews

There are no reviews yet.


Be the first to review “TNS5NP800SE”

has been added to your cart:
Checkout