- Description
- DATASHEET
- Reviews (0)
Description
TNV5T401 overview
Huawei OptiX OSN 9800 TNV5T401 1*100G Tributary Service Processing Board(QSFP28)
The optional version of the TNV5T401 is the TNV5T402, TNV5T404.
Appearance of the TNV5T401
Valid slots
Device | Number of Occupied Slots | Physical Slot | Logical Slot |
---|---|---|---|
OptiX OSN 9800 M24 | 2 | (IU1, IU13), (IU2, IU14), ……, (IU11, IU23), (IU12, IU24) | IU1 to IU12 |
OptiX OSN 9800 U32 Enhanced | 1 | IU1 to IU32 | IU1 to IU32 |
OptiX OSN 9800 U32 Standard | 1 | IU1 to IU32 | IU1 to IU32 |
OptiX OSN 9800 U64 Enhanced | 1 | IU1 to IU64 | IU1 to IU64 |
OptiX OSN 9800 U64 Standard | 1 | IU1 to IU64 | IU1 to IU64 |
Item |
TNV5T401 |
---|---|
Backplane capacity | The total bandwidth is 100 Gbit/s.
NOTE: Supports backplane cross-connections of one ODU4/ODU3/ODUflex signal from/to the cross-connect board.
|
Client-side service type |
|
Service mapping mode | 100GE service: Supports Bit Transparent Mapping ODU4, MAC Transparent Mapping ODU4, and MAC Transparent Mapping ODUFlex. |
FEC coding |
|
FEC coding |
|
OTN overhead |
NOTE: Supports overhead processing defined by ITU-T G.709. The service mapping process complies with ITU-T G.709 and G.Sup43.
|
Maximum frame length for a port | 1518 to 9600 Bytes, supports a jumbo frame with a maximum length of 9600 bytes. |
LPT | Not supported |
Client 1+1 protection | Supported
NOTE:
|
ODUk SNCP | Supported
NOTE:
|
Tributary SNCP | Supported |
Electrical-layer ASON | Supported |
L1 Service Encryption | Supported
NOTE: When receiving OTU4 services on the client side, the board does not support the encryption.
|
ALS | Supported on the client side when non-OTN services are received. |
LLDP | When the client-side service type is 40GE/100GE, the board supports the LLDP function.
NOTE: When the service mapping mode is MAC transparent mapping, the LLDP mode of the port is the Receive mode by default. In this case, LLDP packets are not transparently transmitted.
|
Physical clock |
|
IEEE 1588v2 | Supports this function when receiving100GE(MAC transparent mapping) services on the client side. |
ITU-T G.8275.1 | Supports this function when receiving100GE(MAC transparent mapping) services on the client side. |
ITU-T G.8273.2 | Supported
NOTE: The board does not support ITU-T G.8273.2 when the system control board is U2CTU.
|
Outband DCN | Supportes when the client-side service type is OTU4. |
Test frame | When the client-side service type is 40GE/100GE, the board supports test frame.
NOTE: For Ethernet test frames, only one interface can be used to send them at a time.
|
PRBS | Supported
NOTE:
|
Delay measurement |
|
Channel loopback | Not supported |
Port loopback |
NOTE: The board supports ODUk inloop and ODUk outloop only when non-OTN services are received, the port working mode is non-convergence, and bidirectional cross-connections are configured. When the service type is set to None, Inloop, Outloop, and ODUk Outloop are not supported. When non-OTN services are received, the PRBS in the backplane direction can be used only with ODUk loopback. For details. |
FlexE group loopback | Supports Inloop/Outloop. |
Alarm and performance event monitoring |
|
Reviews
There are no reviews yet.