ZTE ZXA10 C600
ZTE ZXA10 C600 19-inch Chassis with 2*SFUL Main Control Board, 2*XFTO 10GE Ethernet Optical Interface Card with 8 ports 10GE Uplink each, 2*PRVR DC power board.
- Description
- DATASHEET
- Packing info
- Reviews (5)
Description
ZTE ZXA10 C600 OLT Overview
ZTE ZXA10 C600 19-inch Chassis with 2*Main Control Board, 2*PRVR DC power board.
Regarding the main control board: You can choose SFUL, SFULV, SFUH (with 4*10GE optical upstream), SFUHV (with 4*10GE optical upstream).
As for the uplink board: XFNH(16-port GE/10GE Uplink); XFTO(8-ports 10GE Uplink)
Supported Pon Board for ZTE OLT
GPON | XG-PON | XGS-PON | XG-PON and GPON Combo | XGS-PON and GPON Combo | Port | ||
ZTE | C300/C320/C350 | GTGO | GTXO | GTTO | GTBO | 8 | |
GTGH | 16 | ||||||
C600/C650/C680 | GFGH | GFXH | GFTH | GFBN/GFBH | GFCH | 16 |
The ZXA10 C600 is a high capacity optical access device oriented to network re-architecture based on the TITAN platform. It meets the needs for access to complete scenarios of ultra-high bandwidth, great video, FMC and network re-architecture, as well as QoS and carrier-class security.
ZTE ZXA10 C600 OLT is a 19-inch, 11U-tall unified platform with 17 service slots that supports multiple access technologies, including GPON, XG-PON, XGS-PON, Combo PON, 10G-EPON, and GE P2P, as well as seamless migration to 50G PON, and provides L2 switch, VLAN service, L3 routing protocol and service processing capabilities, supporting flexible configurations and adapting to multiple application scenarios.
State-of-the-art architecture meets future requirements
- High-end path and fully distributed programmable architecture.
- Separate control and forwarding aircraft. Redundant protection is designed between the active and standby control plane, while load balancing is adopted for the dual forwarding planes.
- Supports ISSU and NSR to allow 0 interruptions during switchover or upgrade.
- Supports TDM-like channels to ensure ultra-low latency to meet 5G uRLLC requirements.
Higher capacity meets access to multiple services
- Highest level of slot bandwidth and switching capacity in the industry.
- Fully compatible with multiple generations of PONs and multiple technology directions.
- SDN ready, AO / CO re-architecture oriented
- Supports Netconf / YANG, migrate to SDN smoothly
- Supports network cut.
- Supports embedded blade like NFVI for experience-sensitive services.
Supports Combo PON, the industry’s first 3-in-1 combination
- The WDM1r is integrated into the optical module without affecting existing GPON services.
- Supports on-demand deployment of ONU GPON and 10G-GPON according to service development.
ZTE ZXA10 C600 datasheet
Item | ZTE ZXA10 C600 bundle |
Main Control Board | SFUL: 2 |
Uplink | XFTO:2
10GE Ethernet Optical Interface Card with 8 ports 10GE Uplink each |
Switching capacity of backplane bus | ZXA10 C600: 14 Tbit/s |
Switching card switching capacity | ZXA10 C600: 3.6 Tbit/s (single switching board SFUL/SFULV/SFUH/SFUHV) |
System switching capacity | ZXA10 C600: 7.2Tbit/s |
Switching and forwarding delay | Upstream: ≤1500 μs
Downstream: ≤100 μs |
Full load bit error rate | <10 e-9 (full load transmission) |
GPON Ports | 0 |
Service Slots Remain | 15 |
Power Supply Mode(W) | DC power supply: -48V+/-20%, -60V+/-20% |
Dimensions (mm) | 486.1 mm × 482.6 mm × 288.5 mm |
Weight(kg) | Empty frame: 18kg
Full configuration: <52kg |
Additional information
Weight | 52.0000 kg |
---|---|
Dimensions | 49.0000 × 49.0000 × 29.0000 cm |
Alejandro –
Debido a la expansión, reemplazamos el C320 original por el C600, el original es nuevo y el informe de prueba también está impreso Telecomate.com es un socio de confianza.
Adriano –
Due to the heavy weight of the C600, this time DHL’s shipping costs are high.
Fortunately, the quality of the product is good, and all Gpon boards are equipped with C+-level optical modules.
Alex –
Telecomate.com is a professional network hardware provider.
David –
ZTE C600 is equal to HUAWEI MA5800-X15, with 15 service slots.
Fajardo –
Trustable supplier!