$0.00 Original price was: $0.00.Current price is: $0.00.
Main control board apply to Huawei MA5800 X2 integrated with 2-port 10GE/GE optical uplink port, 2-port GE optical uplink port
H901MPSA is a main control card of Huawei SmartAX MA5800-X2 NG OLT, It is the core of system control and service switching and aggregation.
MAX access 4096 subscribers
supports 32768 ARP table
Supports active/standby switchover at the control plane
Supports load sharing mode at the forwarding plane, doubling processing performance
Supports ISSU, saving the upgrade interruption time
Supports synchronization Ethernet
Supports 1588v2
| Function | |
| Bandwidth per slot | 40Gbit/s (load sharing mode) |
| MAC address table | 262143 |
| Access ONT | 4096 |
| Multicast user | 4096 |
| IPv4 routing table | 65536 |
| IPv6 routing table | 16384 |
| Service port | 32768 |
| ND table | 16384 |
| ARP table | 32768 |
| Maximum Frame Size | 2052 bytes 9216 bytes (jumbo frame enabled) |
| Environment | |
| Operating temperature | -40°C to +65°C |
| Power consumption | Static: 30W Maximum: 43W |
| Mechanical Specification | |
| Dimensions(mm) | 35.28 (W)x 258.15 (D) x 130.36 (H) |
| Weight(kg) | 0.99 |
How to add local digitmap for Huwei ONT?
Because the specific ONT model is unknown, you can refer to the general ONT configuration method for configuring the ONT digitmap.
1. Log in to the WebUI of the Huawei ONT.
2. In the navigation tree on the left, choose Advanced Configuration > Voice > VoIP Basic Configuration. In the pane on the right, parameters of a VoIP interface can be configured, including the IP addresses of the primary server and secondary server, and digitmap.
What's the power module for MA5800 series OLT?
MA5800-X2: PISB-AC power module PISA: DC power module
MA5800-X7/X15/X17: PILA, -48V DC power module
I have MA5800 with CSHF card. If I use XG-PON and XGS-PON ONTs mixed on a port. How can they share the download/upload bandwith?
When XG-PON and XGS-PON ONTs are mixed on the same PON port of an MA5800 with a CSHF card, they share the same optical wavelength for downstream but use different upstream channels.
In the downstream direction, both XG-PON and XGS-PON ONTs receive data from the same 10 Gbps wavelength. So if the XG-PON ONTs are using 5 Gbps, the remaining 5 Gbps can still be used by the XGS-PON ONTs. The total downstream capacity is shared dynamically among all ONTs connected to that port, depending on traffic demand and DBA (Dynamic Bandwidth Allocation) scheduling.
In the upstream direction, it’s different:
XG-PON uses a 2.5 Gbps upstream channel.
XGS-PON uses a 10 Gbps upstream channel.
What service boards are supported for MA5800 series OLT?
GPON Board: GPHF/GPUF/GPLF/GPSF
XGPON Board: XGHD
GPON&XGPON combo Board: CGHF
XGS-PON Board: XSHF/XSHD
XGS-PON&GPON combo Board: CSHF
Flex-PON Board: FLHF
What is the main architectural advantage of the MA5800?
MA5800 adopts a distributed architecture, meaning each service board has independent forwarding capability. This ensures higher performance, enhances reliability, and supports large-scale 10G PON deployments compared with MA5600T’s centralized architecture.
| Weight | 3.0000 kg |
|---|---|
| Dimensions | 49.0000 × 32.5000 × 7.5000 cm |
| MA5800 |
.svg)
.svg)
Marcelolibe –
This one is integrated with 2-port 10GE/GE optical uplink port, 2-port GE optical uplink port, which can apply to my MA5800-X2. Before I choose this one in there, I searched lots of websites and this one is the most relible and their price is the most reasonable. Thank you my friend, a wonderful try.
Aspen –
I couldn’t wait to try it out as soon as I received it. I really think it’s worth the money