TN54GS4

0 Reviews Write a review
SKU2033666
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN54GS4 support 100G general service processing board

Description

TN54GS4 Overview

 

TN54GS4 100G general service processing board applied to OptiX OSN 8800/6800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN54GS4 board in a OptiX OSN 8800 subrack

Product Valid Slots
Enhanced OptiX OSN 8800 T64 subrack IU1-IU8, IU11-IU42, IU45-IU68
Enhanced OptiX OSN 8800 T32 subrack IU1-IU8, IU12-IU27, IU29-IU36
OptiX OSN 8800 T16 subrack IU1-IU8, IU11-IU18
Item TN54GS4
Basic function GS4 converts signals as follows: 80xODU0/80xODUflex/40xODU1/10xODU2/10xODU2e/2xODU3/1xODU4<->1xOTU4 Supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, and ODU3 signals.
Line-side service type OTU4: OTN service at a rate of 111.81 Gbit/s
Cross-connect capabilities Supports the cross-connection of 80 channels of ODU0/ODUflex signals or 40 channels of ODU1 signals or ten channels of ODU2/ODU2e signals or two channels of ODU3 signals or one channel of ODU4 signals between the GS4 and the cross-connect board.
OTN function
  • Supports the OTU4 interface on the line side.
  • Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
  • OTU4 layer: supports the SM function.
  • ODUk (k=0, 1, 2/2e, 3, 4, flex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.
ESC function Supported
PRBS function Supports the PRBS function on the line side.
LPT function Not supported
FEC coding FEC
NOTE:
Boards that use different FEC modes cannot interconnect with each other.
Alarms and performance events monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Monitors OTN alarms and performance events.
ALS function Not supported
Latency measurement Supported
Test frame Not supported
IEEE 1588v2 Not supported
Physical clock Not supported
Optical-layer ASON Not supported
Electrical-layer ASON Supported
Protection scheme
  • Supports ODUk SNCP.
  • Supports tributary SNCP protection.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
NOTE:
When the cross-connect granularity is ODUflex, the board does not support tributary SNCP protection.
Loopback Line-side Loopback ODU0 Channel Loopback ODU1 Channel Loopback ODU2 Channel Loopback ODU3 Channel Loopback ODUflex Channel Loopback
Supported Supported Supported Supported Supported Supported
 

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN54GS4”

Your email address will not be published. Required fields are marked *

21  ⁄  3  =  

Back to Top

Search For Products

Product has been added to your cart