TN54HSNS4

0 Reviews Write a review
SKU2034051
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 8800 TN54HSNS4 1 x 100G universal line service processing board

Description

TN54HSNS4 Overview

TN54HSNS4 1 x 100G universal line service processing board applied to OptiX OSN 8800.

The OptiX OSN 8800 Intelligent Optical Transport Platform (OptiX OSN 8800 for short) is a new generation of intelligent MS-OTN product. The OptiX OSN 8800 can interconnect with any product from the OptiX OSN product series, such as the OptiX OSN 1800, to form an end-to-end OTN network. The OptiX OSN 8800 T32/T16 supports unified switching and control based on ODUk, VC, and packets, achieving unified switching and transmission for multiple services on a single multi-service optical transport network (MS-OTN). The OptiX OSN 6800 Intelligent Optical Transport Platform (OptiX OSN 6800 for short) is referred to as Huawei next generation intelligent optical transport platform. The OptiX OSN 6800 is for area backbones, local networks, metropolitan convergence layers and metropolitan core layers. It may also work with other WDM, SDH/SONET equipment to offer a complete Metro WDM solution.

 

Valid slots for the TN54HSNS4 board in a OptiX OSN 8800/6800 subrack

Product Valid Slots
OptiX OSN 8800 T64 subrack IU1-IU7, IU11-IU17, IU19-IU25, IU27-IU33, IU35-IU41, IU45-IU51, IU53-IU59, IU61-IU67
OptiX OSN 8800 T32 subrack IU1-IU7, IU12-IU18, IU20-IU26, IU29-IU35
OptiX OSN 8800 T16 subrack IU1-IU7, IU11-IU17
OptiX OSN 8800 universal platform subrack IU3-IU15
OptiX OSN 6800 subrack IU1-IU7, IU11-IU15
Item TN54HSNS4
OTN function
  • Supports OTU4 interfaces on the WDM side.
  • Adopts the frame formats and overhead processing methods defined in ITU-T G.709.
  • Supports the SM function at the OTU4 layer.
  • Supports OTU4 FTFL configuration and query.
  • ODUk (k = 0, 1, 2, 2e, 3, 4, flex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.
Cross-connect functionality Implements the following service grooming when working with cross-connect boards: 80 x ODU0/ODUflex, 40 x ODU1, 2 x ODU3, 10 x ODU2/ODU2e, 1 x ODU4.
Protection scheme
  • Supports ODUk SNCP.
  • Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
  • Supports tributary SNCP protection.
  • Supports ODUk SPRing protection.
NOTE:
When the grooming granularity is ODUflex, SPRing protection is not supported.
WDM specifications Supports DWDM specifications.
Tunable wavelengths Supports tunable wavelength optical modules that provide for 96 wavelengths tunable in the extended C band with 50 GHz channel spacing
PRBS function Supported
Error correction encoding Gray light optical module: Supports FEC encoding. Other modules: Supports SDFEC2 and HFEC PLUS encoding.
NOTE:
Boards that use different FEC modes cannot interconnect with each other.
Performance and alarm monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Monitors OTN alarms and performance events.
Regeneration board The WDM-side signals from an HSNS4 board can be regenerated by another board of the same type. For example,
  • An HSNS4 board of the T65 type can be regenerated by a board such as LTX of the T65 type. For example, a TN54HSNS4T65 board can be regenerated by a TN17LTXT65 board.
ALS function Not supported
ESC function Supported
Test frames Not supported
Loopback
  • Supports system-side channel inloops and outloops.
  • Supports WDM-side inloops and outloops.
Delay measurement (DM) Supports the PM and TCM Latency measurement.
Physical clocks Supported when ODU0, ODU1, ODU2, ODU2e, ODU3, and ODUflex signals are groomed at the backplane.
IEEE 1588v2 Not supported
Optical-layer ASON Supported
NOTE:
In versions earlier than V100R013C10SPC500, ASON is not supported in high SOP mode. In V100R013C10SPC500 and later versions, only ASON without optical parameters is supported in high SOP mode.
Electrical-layer ASON Supported
Overtemperature protection If the working temperature of the board exceeds the configured threshold and services are affected, the board will automatically reset the key chip to prevent damages to the board.
 
Item TN54HSNS4
Basic functions The HSNS4 board applies to electrical regeneration sites to provide the electrical regeneration function for optical signals.
Regeneration rate OTU4: OTN service at a rate of 111.81 Gbit/s
OTN function
  • Supports OTU4 interfaces on the WDM side.
  • Adopts the frame formats and overhead processing methods defined in ITU-T G.709.
  • Supports the SM function at the OTU4 layer.
  • Supports OTU4 FTFL configuration and query.
  • ODUk (k = 0, 1, 2, 2e, 3, 4, flex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.
SDH function Not supported
WDM specifications Supports DWDM specifications.
Tunable wavelength Supports tunable wavelength optical modules that provide for 96 wavelengths tunable in the extended C band with 50 GHz channel spacing
ESC function Supported
PRBS function Not supported
Error correction encoding Supports SDFEC2 on the WDM side.
NOTE:
Boards that use different FEC modes cannot interconnect with each other.
Performance and alarm monitoring
  • Monitors BIP8 bytes (Bursty mode) to help locate line failures.
  • Monitors parameters such as the bias current, temperature, and optical power of the laser.
  • Monitors OTN alarms and performance events.
ALS function Not supported
Test frame Not supported
IEEE 1588v2 Not supported
Physical clocks Not supported
Protection scheme Not supported
Overtemperature protection If the working temperature of the board exceeds the configured threshold and services are affected, the board will automatically reset the key chip to prevent damages to the board.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TN54HSNS4”

Your email address will not be published. Required fields are marked *

  +  31  =  38

Back to Top

Search For Products

Product has been added to your cart