Home/Transport Network/OSN 9800 Series/OSN 9800 M Series/TNG1M828SM
TNG1M828SM
TNG1M828SM
TNG1M828SM
TNG1M828SM
Categories:,

TNG1M828SM

0 Reviews Write a review
SKU2036092
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei OptiX OSN 9800 TNG1M828SM 2*400Gbit/s or 8*100Gbit/s or 20*10Gbit/s Service Multiplexing Into 1*400G/600G/800G Programable Wavelength Conversion Board

    Tech Support
    Service Commitment
    Steps Shipping
    Customer Satisfacition

Description

TNG1M828SM Overview

TNG1M828SM 2*400Gbit/s or 8*100Gbit/s or 20*10Gbit/s Service Multiplexing Into 1*400G/600G/800G Programable Wavelength Conversion Board, applied to Huawei OptiX OSN 9800 M05/M12/M24.

To meet ultra-large cross-connect capacity and bandwidth requirements, Huawei presents the OptiX OSN 9800 product series. The OptiX OSN 9800 product series include the OptiX OSN 9800 U64, U32, P18 and universal platform subracks. Applied at the electrical layer, the OptiX OSN 9800 U64 and U32 subracks share boards by using unified software and hardware platforms, and can work with the OptiX OSN 9800 universal platform subrack and P18 subrack, OptiX OSN 8800 platform subrack and T16 subrack, and OptiX OSN 6800 optical subracks in WDM and OTN systems.

The TNG1M828SM board has only one variant: TNG1M828SMT71.

 

Valid slots for the TNG1M828SM board in a M05/M12/M24 subrack

Device Number of Occupied Slots Physical Slot Logical Slot
OptiX OSN 9800 M12 2 (IU1, IU2), (IU2, IU3), ……, (IU11, IU12), (IU12, IU13) IU2 to IU13
OptiX OSN 9800 M24 2 (IU1, IU2), (IU2, IU3), ……, (IU22, IU23), (IU23, IU24) IU2 to IU6, IU8 to IU12, IU14 to IU18, IU20 to IU24
Item TNG1M828SM
Functions and Features of the TNG1M828SM Board (OTU)
Basic function Converts client-side services into OTU signals and supports the hybrid transmission of services on the client side. For details about the service types, number of channels, and mapping paths supported by different ports, see Application.
Client-side service type
  • FC100: The rate is 1.06 Gbit/s.
  • FC200: The rate is 2.12 Gbit/s.
  • FC400: The rate is 4.25 Gbit/s.
  • FC800: The rate is 8.5 Gbit/s.
  • FC1200: The rate is 10.51 Gbit/s.
  • FC1600: The rate is 14.025 Gbit/s.
  • FC3200: The rate is 28.05 Gbit/s.
  • FICON: The rate is 1.06 Gbit/s.
  • FICON Express: The rate is 2.12 Gbit/s.
  • FICON 4G: The rate is 4.25 Gbit/s.
  • FICON 8G: The rate is 8.5 Gbit/s.
  • FICON 10G: The rate is 10.51 Gbit/s.
  • ESCON: The rate is 200 Mbit/s.
  • FDDI: The rate is 125 Mbit/s.
  • 100G FlexE unaware: The rate is 103.125 Gbit/s.
  • STM-1: The rate is 155.52 Mbit/s.
  • STM-4: The rate is 622.08 Mbit/s.
  • STM-16: The rate is 2488.32 Mbit/s.
  • STM-64: The rate is 9.95 Gbit/s.
  • OC-3: The rate is 155.52 Mbit/s.
  • OC-12: The rate is 622.08 Mbit/s.
  • OC-48: The rate is 2488.32 Mbit/s.
  • OC-192: The rate is 9.95 Gbit/s.
  • OTU1: The rate is 2.67 Gbit/s.
  • OTU2: The rate is 10.71 Gbit/s.
  • OTU2e: The rate is 11.1 Gbit/s.
  • OTU4: The rate is 111.81 Gbit/s.
  • DVB-ASI: The rate is 270 Mbit/s.
  • HD-SDI: The rate is 1.49 Gbit/s.
  • HD-SDIRBR: The rate is 1.49/1.001 Gbit/s.
  • 3G-SDI: The rate is 2.97 Gbit/s.
  • 3G-SDIRBR: The rate is 2.97/1.001 Gbit/s.
  • SDI: The rate is 270 Mbit/s.
  • FE: The rate is 125 Mbit/s.
  • GE: The rate is 1.25 Gbit/s.
  • 10GE LAN: The rate is 10.31 Gbit/s.
  • 10GE WAN: The rate is 9.95 Gbit/s.
  • 100GE: The rate is 103.125 Gbit/s.
  • 400GE: The rate is 425 Gbit/s.
  • 25GE: The rate is 25.78 Gbit/s.
WDM specification Supports the DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding
  • Client side: Supports FEC coding when the client-side service type is OTU4.
  • Client side: Supports RSFEC coding when the client-side service is 25GE/100GE/400GE/FC3200.
  • WDM side: Supports SDFEC3 coding.
Line modulation format
  • 400G s16QAM
  • 600G 16QAM
  • 800G e64QAM
Typical channel spacing 400G s16QAM/600G 16QAM/800G e64QAM: 100 GHz + n x 6.25 GHz (n = 0, 1, 2...)
NOTE:
Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.
LPT Supported
NOTE:
The LPT function is supported when the client-side service type is FE/GE/10GE LAN.
Intra-board 1+1 protection Supported
NOTE:
The board supports intra-board 1+1 protection when working with optical protection boards.
Client 1+1 protection Supported
NOTE:
When 400GE/FlexE services are received on the client side, client 1+1 protection is not supported.
Tributary SNCP Supported
Optical-layer ASON Supported
NOTE:
This function is supported when the line rate is OTUCn (n = 4 or 6).
L1 service encryption Supports setting the encryption function by port.
NOTE:
  • After the encryption function is configured, the WDM-side rate of the board cannot be switched, but the modulation formats of the same rate can be switched.
  • ClientLP port encryption is supported in the case of FlexE services.
  • This function is not supported in the case of OTU4 services.
  • This function is not supported in the case of ODU1 convergence mode.
Digital optical label When LS Ability is enabled, the board supports loading low-frequency pilot-tone modulation signals and overheads during wavelength conversion, and can work the optical-layer board that supports the digital optical label function to detect optical power and overheads and report optical performance data.
ALS Supported when client services are non-OTN services
LLDP Supported
NOTE:
  • Supported when Ethernet services are received on the client side.
  • This function is not supported when FlexE/10GE WAN/GE/FE services are received.
  • Ports TX1/RX1 to TX8/RX8 support only the RX and DISABLE modes of LLDP.
Physical clock Supports synchronous Ethernet processing:
  • 100GE (MAC Transparent Mapping ODU4/MACB2B)
  • 400GE (MACB2B)
  • 25GE (GFP-F)
  • 10GE LAN (MAC Transparent Mapping(10.7G))
  • GE (GFP-T)
Supports synchronous Ethernet transparent transmission:
  • 100GE (Bit Transparent Mapping ODU4)
  • 400GE (Bit Transparent Mapping (BMP))
  • FlexE 100G unaware
  • 25GE (BMP)
  • 10GE LAN (Bit Transparent Mapping(11.1G))
  • GE (TTT+GMP)
IEEE 1588v2 Supported
NOTE:
  • This function is supported when 100GE/400GE services are received on the client side and the mapping mode is GFP-F or MACB2B.
  • This function is supported when GE (GFP-T), 10GE LAN (MAC Transparent Mapping(10.7G)), or 25GE (GFP-F) services are received on the client side.
  • This function is supported when FlexE services are received on the client side.
ITU-T G.8275.1 Supported
NOTE:
  • This function is supported when 100GE/400GE services are received on the client side and the mapping mode is GFP-F or MACB2B.
  • This function is supported when GE (GFP-T), 10GE LAN (MAC Transparent Mapping(10.7G)), or 25GE (GFP-F) services are received on the client side.
  • This function is supported when FlexE services are received on the client side.
ITU-T G.8273.2 Supported
NOTE:
  • This function is supported when 100GE/400GE services are received on the client side and the mapping mode is GFP-F or MACB2B.
  • This function is supported when GE (GFP-T), 10GE LAN (MAC Transparent Mapping(10.7G)), or 25GE (GFP-F) services are received on the client side.
  • This function is supported when FlexE services are received on the client side.
High-precision clock synchronization Supported.
NOTE:
  • This function is not supported when the board uses the QSFP28,1310,100GE,-3.1dBm,4dBm,-4.5dBm,LC,SMF,2km,PAM4 module.
  • The NE can implement high-precision time synchronization only after the corresponding license is obtained.
  • To support high-precision clock synchronization, the board must work with the subracks and system control boards that support high-precision clocks. For details, see the Clock Synchronization Feature.
  • This function is not supported by ports IN/OUT and TX1/RX1 to TX8/RX8.
Outband DCN Supports ESC communication.
NOTE:
  • The board supports DCN on the WDM side.
  • The board supports DCN when OTN services are received on the client side.
Test frame Supported
NOTE:
  • Only one interface can be used to send Ethernet test frames at a time.
  • This function is not supported when FlexE services are received on the board.
PRBS
  • Supports optical port PRBS/NULL tests for WDM-side and client-side OTN services.
  • Supports system-side PRBS on the client side.
NOTE:
PRBS signals can not be sent from the client-side optical port to the system side, when the WDM-side rate is OTUC8.
Latency measurement
  • The board supports PM/TCM latency measurement for upstream higher-order ODU channels.
  • When non-OTN services are received on the client side, the board supports PM latency measurement for upstream lower-order ODU channels.
  • When OTN services are received on the client side, the board supports TCM latency measurement for downstream lower-order ODU channels.
NOTE:
  • In a mapping path, the ODUk channel with the maximum granularity is the higher-order ODU channel, and other ODUk channels are lower-order ODUk channels.
  • When the cross-connect granularity is TDUflex, the PM/TCM latency measurement of the lower-order ODU channel is not supported.
Channel loopback Not supported
Port loopback
  • Supports inloops and outloops on the client side.
  • Supports ODUk inloops and outloops on the client side.
  • Supports FlexE Group inloops and outloops on the client side.
  • Supports inloops and outloops on the WDM side.
NOTE:
  • When the WDM-side rate of the board is OTUC8, the ODUk loopback function is not supported on the client side.
  • When FlexE services are received on the board, ODUk loopback and FlexE Group loopback cannot be configured at the same time.
Alarm and performance event monitoring
  • Monitors BIP8 bytes (Bursty mode for OTU4) to facilitate line fault locating.
  • Monitors OTN alarms and performance events.
  • Monitors the laser bias current, laser operating temperature, and optical power.
  • Supports the Ethernet RMON monitoring function.
  • Monitors CD and PMD performance.
Functions and Features of the TNG1M828SM Board (Regeneration)
Basic function Electrically regenerates optical signals at an electrical regeneration station.
Regeneration mode Unidirectional regeneration
Regeneration rate
  • OTUC4
  • OTUC6
  • OTUC8
WDM specification Supports DWDM specifications.
Tunable wavelength Supports tunable wavelengths of WDM-side optical signals in Super C band (1524 nm to 1573 nm).
FEC coding SDFEC3
Line modulation format
  • 400G s16QAM
  • 600G 16QAM
  • 800G e64QAM
Typical channel spacing 400G s16QAM/600G 16QAM/800G e64QAM: 100 GHz + n x 6.25 GHz (n = 0, 1, 2...)
NOTE:
Due to high filtering penalty, the preceding modulation formats cannot be used with 100G optical-layer boards with fixed channel spacing, such as the TNG2D60 and TNG2M60.
Optical-layer ASON Supported
NOTE:
This function is supported when the line rate is OTUCn (n = 4 or 6).
ALS Supported
Outband DCN Supports ESC communication.
Alarm and performance event monitoring
  • Monitors OTN alarms and performance events.
  • Monitors CD and PMD performance.
  • Monitors the laser bias current, laser operating temperature, and optical power.

Additional information

Reviews

There are no reviews yet.

Be the first to review “TNG1M828SM”

Your email address will not be published. Required fields are marked *

97  −    =  88

Related products

TNU5N404C01-1
Quick view
Categories1: ,

TNU5N404C01

R.F.Q
(1)
SKU2009716
TNV7T220-1TNV7T220-2
Quick view
Categories1: ,

TNV7T220

R.F.Q
(1)
SKU2012858
OSN-9800-U16
Quick view
Categories1: ,

OSN 9800 U16

R.F.Q
(2)
SKU2012848
TNV5T401-1
Quick view
Categories1: ,

TNV5T401

R.F.Q
SKU2012881
TNV5U210-1
Quick view
Categories1: , ,

TNV5U210

R.F.Q
SKU2012882
OSN-9800-U32
Quick view
Categories1: ,

OSN 9800 U32 Standard

R.F.Q
(2)
SKU2012873
Main Menu
Back to Top

Search For Products

Popular
Product has been added to your cart