MA5801-FL04-H1

0 Reviews Write a review
SKU2037890
AvailabilityIn Stock
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Huawei MA5801-FL04-H1 is a box-shaped OLT with built-in modules,  4 x FlexPON (GPON, XG(S)-PON, XG(S)-PON&GPON Combo), 4 x GE/10GE upstream optical ports, 2 x GE/2.5G upstream electrical ports

Description

MA5801-FL04-H1 Overview

Driven by new services such as 4K videos, virtual reality (VR), home networking, and network cloudification, fiber access becomes an important measure for countries around the world to popularize broadband networks. The fiber access industry is booming. With fiber access nodes continuously being moved downwards, OLTs are deployed closer to users. As deployment scenarios are various and complex, operators urgently require smaller OLTs to meet different requirements.

The MA5801-FL04-H1 is a small-sized box-shaped OLT. It provides four FlexPON service ports and can work with a FlexPON optical module to support GPON, XG(S)-PON, and XG(S)-PON&GPON access. It also provides a unified bearer platform for multiple services, such as broadband, voice, video streaming, and video backhaul services. The product enables one fiber network to carry all types of services, simplifying the network architecture and reducing the OPEX.

 

MA5801-FL04-H1 Ports

FL04

 

Port Name Silk Screen Number of Ports Function
AC power port 1 Connects to 110 V or 220 V AC power.
DC power port 1 Connects to the -48/-60 V DC power supply.
Reset button RESET 1 Resets the board manually, which will cause service interruption; therefore, exercise caution when performing this operation.
FlexPON port PON 0–3 4 Provides 4 FlexPON ports and works with the optical module to implement FlexPON access.
Upstream port (GE/10GE optical port) GE/10GE 0-3 4 Provides 4 GE/10GE optical ports for upstream transmission.
Upstream port (GE/2.5GE electrical port) GE/2.5GE 4-5 2 Provides 2 GE/2.5GE electrical ports for upstream transmission.
Maintenance network port ETH 1 Provides a 10/100M BASE-T maintenance network port to connect to the network port on a maintenance terminal.
RS-232 serial port CON 1 Connects to the serial port on a maintenance terminal.
RS-485 monitoring serial port ESC 1 Connects to the serial port on a monitored device.
Boolean alarm port ALM 1 Connects to a Boolean value output sensor.

 

MA5801-FL04-H1 Product Highlights

Fixed-mobile convergence (FMC), reusing cabinet space at existing base stations
To fast construct FMC networks, mobile operators can fully utilize existing backhaul network resources and cabinet space for building FTTH networks. Specifically, they can deploy the product in their mobile cabinets and route drop fibers in a short distance to cover surrounding households. This enables fast network deployment, shortens the time to market (TTM), accelerates the return on investment (ROI), and facilitates an upward business spiral.

Full coverage and fast deployment in sparsely-populated areas
To cover remote and sparsely-populated areas with national broadband, this product can be used together with different optical modules and the one-stop outdoor site solution. This enables fast deployment of long-distance FTTH networks. In geographically complicated areas such as mountainous areas and islands, the upstream fiber deployment is costly and time-consuming. The microwave backhaul solution can be used to implement long-distance and highly reliable FTTH network access, accelerating the deployment by 70% and striking a balance between network coverage and investment.

MA5801-FL04-H1 Primary Features

Layer-2 Features
VLAN+MAC forwarding SVLAN + CVLAN forwarding
PPPoE+ DHCP option82
Layer-3 Features
Static route RIP/RIPng
OSPF/OSPFv3 IS-IS
BGP/BGP4+ ARP
DHCP relay VRF
Multicast
IGMP v2/v3 IGMP Proxy/Snooping
MLD v1/v2 MLD Proxy/Snooping
VLAN-based IPTV multicast IPv4 PIM and PIM-SSM
QoS
Traffic classification Priority-based processing
trTCM-based traffic policing WRED
Traffic Shaping HQoS
PQ/WRR/PQ+WRR ACL
IPv6
IPv4/IPv6 dual stack IPv6 L2 and L3 forwarding
DHCPv6 relay
System Reliability
xPON Type B/Type C protection ERPS (G.8032)
In-service board fault detection and rectification
Aggregation Management
Aggregation management
Item MA5801-FL04-H1
Power supply mode
  • DC power supply
  • AC power supply
Operating voltage range
  • DC power supply: –38.4 V to –72 V
  • AC power supply: 100 V to 240 V
Rated voltage
  • DC power supply: –48 V/–60 V
  • AC power supply: 110 V/220 V
Maximum input current
  • DC power supply: 6 A
  • AC power supply: 2.5 A
Operating temperature range –40°C to +65°C. The minimum startup temperature is –25°C.
NOTE:
The ambient temperature refers to the temperature measured at the air intake vent of a service subrack.
Operating humidity range 5%–95% RH
Atmospheric pressure 70–106 kPa
Altitude Below 4000 m. The air density varies with the altitude, which affects the heat dissipation capability of the device. Therefore, the operating temperature of the device changes with the altitude.
System forwarding capacity 185 Gbit/s
Maximum number of MAC addresses 32768
Maximum number of connected ONTs 512
Maximum entries in the IPv4 routing table 8192
Maximum entries in the IPv6 routing table 4096
Maximum entries in the ARP table 16384
Bit error rate (BER) in full load When FEC is enabled, GPON BER: < 10 e-10, and XG(S)-PON BER: < 10 e-12.
Number of upstream optical ports 4 x GE/10GE
Number of upstream electrical ports 2 x GE/2.5GE
Number of service ports 4 x FlexPON (GPON, XG(S)-PON, XG(S)-PON&GPON Combo)
System reliability metrics System availability in typical configuration: > 99.999% Mean time between failures (MTBF): about 45 years
NOTE:
Due to different network environments and different boards used by devices, the MA5801 MTBF (45 years) is only for reference. The average repair time for field replaceable units (FRUs) is about 2 hours. The preceding values are only for reference. For details, contact Huawei technical support.
Power consumption DC power supply:
  • Static power consumption: 41 W
  • Typical power consumption: 62 W
  • Maximum power consumption: 78 W
AC power supply:
  • Static power consumption: 42 W
  • Typical power consumption: 62 W
  • Maximum power consumption: 79 W
NOTE:
The power consumption of the device is obtained in the following testing conditions:
  • Static power consumption: 25°C, no optical module in any optical port, and no service running
  • Typical power consumption: 25°C, full service configuration, and full traffic
  • Maximum power consumption: 65°C, full service configuration, and full traffic
Dimensions (H x W x D Without mounting ears: 43.6 mm x 442 mm x 220 mm (1.72 in. x 17.4 in. x 8.66 in.) With IEC mounting ears: 43.6 mm x 482.6 mm x 220 mm (1.72 in. x 19 in. x 8.66 in.) With ETSI mounting ears: 43.6 mm x 531 mm x 220 mm (1.72 in. x 20.91 in. x 8.66 in.)
Weight (full configuration)
  • DC power supply: 3.4 kg
  • AC power supply: 3.5 kg

Additional information

Weight 9 kg
Dimensions 59 × 39 × 26 cm
Brand

Huawei

Warranty

12 Months

Reviews

There are no reviews yet.

Be the first to review “MA5801-FL04-H1”

Your email address will not be published. Required fields are marked *

  ⁄  7  =  1

Back to Top

Search For Products

Product has been added to your cart