H802GPFD B+

1 Review Write a review
SKU4779
AvailabilityIn Stock
huawei-ma5600t GPON Board
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

Huawei H802GPFD 16-port GPON OLT Interface Board with B+ module, apply to Huawei MA5608T/MA5680T/MA5683T

Description

Item H802GPFD B+
GPON Port 16-GPON Port
GPON SFP Module Specification
Type B+ Module: One-fiber bi-directional optical module, class B+
Operating Wavelength Tx: 1490 nm, Rx: 1310 nm
Encapsulation Type SFP
Port Rate B+: 2.49Gbit/s, Receive Speed: 1.24Gbit/s
Minimun Output Optical Power B+: 1.5 dBm
Maximum Output Optical Power B+: 5 dBm
Maximum Receiver Sensitivity B+: -28 dBm
Optical Connector Type SC/PC
Optical Fiber Type Single-mode
Reach 20.00 km
Overload Optical Power B+: -8 dBm
Extinction Ratio 8.2 dB
Power Consumption and Maximum Frame Size
Power Consumption H802GPFD : Static: 45 W, Maximum: 73 W
H803GPFD : Static: 39 W, Maximum: 61 W
H805GPFD : Static: 26 W, Maximum: 50 W
Maximum Frame Size 2004 bytes
Operating temperature -25°C to +65°C
Dimensions (W x D x H) 22.86 mm x 237.00 mm x 395.40 mm

Which PON technologies are supported by the MA5608T?

The MA5608T supports:
GPON service boards (ITU-T G.984)
EPON service boards (IEEE 802.3ah)

Can the MA5600 Series interoperate with third-party ONUs/ONTs?

Yes, as long as both sides comply with ITU-T G.988 OMCI standards.
However, advanced functions such as Wi-Fi, VoIP, TR-069, and custom VLAN templates may behave differently.
A full OMCI interoperability and service verification test is strongly recommended before large-scale deployment.

What is the recommended optical power range for GPON on the MA5600 Series?

Typical GPON optical power budget:
1. OLT Receiver (Rx): –8 dBm to –27 dBm
2. ONU Receiver (Rx): –8 dBm to –27 dBm
Proper optical design is required to prevent ONU flapping caused by excessive split ratios or fiber degradation.

What control and switching capabilities does the MA5608T provide?

The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.

What management and software features are supported?

The device supports IPv4/IPv6 dual stack, QoS, VLAN and QinQ, IGMP/MLD, OAM, remote maintenance, and full compatibility with Huawei NMS platforms.

Additional information

Weight 3.5000 kg
Dimensions 50.0000 × 33.0000 × 8.0000 cm
MA5600T

Reviews

  1. Armstrong

    Having worked with other suppliers before, I rely more on telecomate, which gives me unexpected high-quality equipment.

Add a review

Your email address will not be published. Required fields are marked *

5  ×  4  =  

Back to Top

Search For Products

Product has been added to your cart