H806GPBH-C++module

1 Review Write a review
SKU4872
AvailabilityIn Stock
huawei-ma5600t GPON Board
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

8-port GPON OLT Interface Board with C++ module, apply to Huawei MA5608T/MA5680T/MA5683T

Description

GPBH is a 8 port GPON interface card of Huawei OLT, provide GPON service access from ONT. GPBD can maximum access 8*128 GPON subscribers. GPBH has two versions H806GPBH, H807GPBH with B+, C+/C++ SFP module.

  • Huawei 8-GPON Port Interface Card with C++ SFP module
  • Apply to Huawei MA5683T, MA5680T, MA5608T OLT system
  • Available at 2 versions:H806GPBH, H807GPBH
  • Support split ration 1:128
  • Support ONU-based queue shaping (GPBD Not)
  • Transmit Speed: 2.488Gbit/s, Receive Speed: 1.244Gbit/s
  • Interface Type: SC/UPC
  • Max Transmit Distance: 20KM
  • Transmit Wavelength: 1490nm, Receive Wavelength: 1310nm
  • Standards Compliance: ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3, ITU-T G.984.4
  • C++ SFP Module Optical Power: 6 dBm~10dBm, Receiver sensitivity: -35 dBm

 

 

Service ports
GPON Port 8-GPON Port
GPON SFP Module Specification
Type B+ Module : One-fiber bi-directional optical module, class B+

C+ Module : One-fiber bi-directional optical module, class C+

C++ Module: One-fiber bi-directional optical module, class C++

Operating Wavelength Tx: 1490 nm, Rx: 1310 nm
Encapsulation Type SFP
Port Rate B+:Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s

C+:Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s

C++:Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s

Minimum Output Optical Power B+ Module : 1.50 dBm

C+ Module : 3.00 dBm

C++ Module: 6.00 dBm

Maximum Output Optical Power B+ Module : 5.00 dBm

C+ Module : 7.00 dBm

C++ Module : 10.00 dBm

Maximum Receiver Sensitivity B+ Module : -28.00 dBm

C+ Module : -32.00 dBm

C++ Module: -35.00 dBm

Optical Connector Type SC/PC
Optical Fiber Type Single-mode
Reach 20.00 km
Overload Optical Power B+ Module : -28.00 dBm

C+ Module : -12.0 dBm

C++ Module : -15.0 dBm

Extinction Ratio 8.2 dB
Device Specifications
Dimensions (mm) 22.86 (W) x 237.00 (D) x 395.40 (H)
Power Consumption and Maximum Frame Size
Power Consumption H806GPBH : Static: 32 W, Maximum: 46 W
H807GPBH:  The data is being tested.
Maximum Frame Size 2004 bytes
Operating temperature -25°C to +65°C

What is the maximum access capacity supported by the MA5608T chassis?

Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.

What control and switching capabilities does the MA5608T provide?

The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.

Which software version should be used? Is upgrading to the latest version necessary?

For carrier networks, the priority is:
1. Version stability
2. Board compatibility
3. Feature consistency with existing equipment
Use a widely deployed, mature version rather than the newest release. Always prepare a rollback plan before upgrading

What is the recommended optical power range for GPON on the MA5600 Series?

Typical GPON optical power budget:
1. OLT Receiver (Rx): –8 dBm to –27 dBm
2. ONU Receiver (Rx): –8 dBm to –27 dBm
Proper optical design is required to prevent ONU flapping caused by excessive split ratios or fiber degradation.

Does the MA5600 Series support IPv6? Will software upgrades be required?

Yes. IPv6 is supported when:
The control board runs a software version that includes IPv6 features.
ONUs/ONTs support IPv6 (bridge or routing mode).
The broadband service is configured for IPv6 address assignment (SLAAC/PD/DHCPv6).
A unified IPv6 plan is recommended to avoid routing inconsistencies.

 The difference between GPON B+, C+ and C++ GPON transceiver
Module B+ Module C+ Module  C++ Module
Type One-fiber bi-directional optical module, class B+ One-fiber bi-directional optical module, class C+ One-fiber bi-directional optical module, class C++
Operating Wavelength Tx: 1490 nm Rx: 1310 nm Tx: 1490 nm Rx: 1310 nm Tx: 1490 nm Rx: 1310 nm
Encapsulation Type SFP SFP SFP
Port Rate Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s Tx: 2.49 Gbit/s Rx: 1.24 Gbit/s Tx: 2.488Gb/s Rx: 1.244Gb/s
Minimum Output Optical Power 1.50 dBm 3.00 dBm 6.00 dBm
Maximum Output Optical Power 5.00 dBm 7.00 dBm 10.00 dBm
Maximum Receiver Sensitivity -28.00 dBm -32.00 dBm -35.00 dBm
Optical Connector Type SC/PC SC/PC SC/UPC
Optical Fiber Type Single-mode Single-mode Single-mode
Reach 20.00 km 20.00 km 20.00 km
Overload Optical Power -8.0 dBm -12.0 dBm -15.0 dBm
Extinction Ratio 8.2 dB 8.2 dB 8.2 dB
 

Additional information

Weight 3.5000 kg
Dimensions 50.0000 × 33.0000 × 8.0000 cm
MA5600T

Brand

Huawei

Lead Time

3-5 days

Ship From

Shenzhen Warehouse

Reviews

  1. Daniel

    Not bad. They worked well so far.

Add a review

Your email address will not be published. Required fields are marked *

8  ⁄    =  2

Back to Top

Search For Products

Product has been added to your cart