H807GPBH-B+ module

0 Reviews Write a review
SKU4880
AvailabilityIn Stock
huawei-ma5600t GPON Board
WarrantyUp to 36 months i
×
Warranty Policy
We provide a comprehensive warranty policy.
Refer to the table for more details.

Original price was: $0.00.Current price is: $0.00.

8-port GPON OLT Interface Board with B+, apply to Huawei MA5608T/MA5680T/MA5683T

Description

Huawei MA5608T MA5683T MA5680T 8-port GPON OLT interface board with B+/C+/C++ SFP module
GPON SFP Module Specification
Type B+ Module : One-fiber bi-directional optical module, class B+

C+ Module : One-fiber bi-directional optical module, class C+

C++ Module: One-fiber bi-directional optical module, class C++

Operating Wavelength Tx: 1490 nm, Rx: 1310 nm
Encapsulation Type SFP
Port Rate B+:Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s

C+:Tx: 2.49 Gbit/s, Rx: 1.24 Gbit/s

C++:Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s

Minimum Output Optical Power B+ Module : 1.50 dBm

C+ Module : 3.00 dBm

C++ Module: 6.00 dBm

Maximum Output Optical Power B+ Module : 5.00 dBm

C+ Module : 7.00 dBm

C++ Module : 10.00 dBm

Maximum Receiver Sensitivity B+ Module : -28.00 dBm

C+ Module : -32.00 dBm

C++ Module: -35.00 dBm

Optical Connector Type SC/PC
Optical Fiber Type Single-mode
Reach 20.00 km
Overload Optical Power B+ Module : -8.0 dBm

C+ Module : -12.0 dBm

C++ Module : -15.0 dBm

Extinction Ratio 8.2 dB
Device Specifications
Dimensions (mm) 22.86 (W) x 237.00 (D) x 395.40 (H)
Power Consumption and Maximum Frame Size
Power Consumption H806GPBH : Static: 32 W, Maximum: 46 W
H807GPBH:  The data is being tested.
Maximum Frame Size 2004 bytes
Operating temperature -25°C to +65°C

What is the maximum access capacity supported by the MA5608T chassis?

Depending on installed service boards, the MA5608T can support up to:
1. 4,096 GPON subscribers (with typical 1:64 split ratio)
2. 2 service slots for PON boards
Actual capacity depends on optical budget, splitter design, and upstream network planning.

What control and switching capabilities does the MA5608T provide?

The MA5608T supports dual-control-board architecture and provides high switching throughput with carrier-grade forwarding performance. It supports L2/L3 edge access features, including VLAN, QinQ, QoS, multicast, and user authentication.

What is the recommended optical power range for GPON on the MA5600 Series?

Typical GPON optical power budget:
1. OLT Receiver (Rx): –8 dBm to –27 dBm
2. ONU Receiver (Rx): –8 dBm to –27 dBm
Proper optical design is required to prevent ONU flapping caused by excessive split ratios or fiber degradation.

What management and software features are supported?

The device supports IPv4/IPv6 dual stack, QoS, VLAN and QinQ, IGMP/MLD, OAM, remote maintenance, and full compatibility with Huawei NMS platforms.

What are the most common operational issues with the MA5600 Series?

Typical issues encountered in the field include:
1. ONU drop / optical power fluctuations due to ODN attenuation or fiber aging
2. Control board switchover failure caused by mismatched versions
3. IPTV freezing triggered by incomplete multicast configuration or insufficient uplink bandwidth
4. ONU not registering due to OMCI compatibility problems
5. Device reboot caused by fan or power module aging
Routine power-level inspections, board version checks, and temperature monitoring can significantly reduce risks.

Additional information

Weight 3.5000 kg
Dimensions 50.0000 × 33.0000 × 8.0000 cm
MA5600T

Reviews

There are no reviews yet.

Be the first to review “H807GPBH-B+ module”

Your email address will not be published. Required fields are marked *

13  +    =  22

Back to Top

Search For Products

Product has been added to your cart