.svg)
.svg)
Description
The FGLT-A is a GPON line termination board. This board can be installed in a 7360 ISAM FX subrack. It meets ETSI and ANSI requirements and is intended for CO in ISAM FX equipment.
The FGLT-A provides termination of 16 GPON ports (2.488 Gbps downstream and 1.244 Gbps upstream). SFP (Small Form Factor Pluggable) GPON optical modules can be plugged in on the FGLT-A board.
FGLT-A board datasheet
| Item | FGLT-A |
| GPON Port | 16-GPON Port |
| Type | C+ Module: Single Fiber Bidirectional Optical Module, Class C+ |
| Operating Wavelength | Tx: 1490 nm, Rx: 1310 nm |
| Encapsulation Type | SFP |
| Port Rate | Tx: 2.488 Gbit/s, Rx: 1.244 Gbit/s |
| Minimun Output Optical Power | C+ Module : 3.00 dBm |
| Maximum Output Optical Power | C+ Module : 7.00 dBm |
| Maximum Receiver Sensitivity | C+ Module : -32.00 dBm |
| Optical Connector Type | SC/PC |
| Optical Fiber Type | Single-mode |
| Reach | 30km/60km (18.6mi/37.3mi) |
| Overload Optical Power | C+ Module : -12.0 dBm |
| Extinction Ratio | 8.2 dB |
| Weight | 1.4kg |
| Dimensions (W x D x H) | 405 mm x 225mm x 25 mm |
Andrés –
Precio razonable, buena calidad, nuevo y original, entrega rápida, una experiencia de compra muy agradable.
Jamie –
La tarjeta de Gpon con 16 puertos usada en las OLTs de Nokia, el precio es realmente barato.
Eugen –
FGLT-A and FGLT-B versions have the same function.
Version A uses ASIC chip, cannot be reprogram.
Elena –
FGLT-A and FGLT-B, functions are the same;
Version A comes with the ASIC chip, it cannot be reprogrammed.