- Description
- DATASHEET
- Packing info
- Reviews (2)
Description
GFTH Card Overview
The GFTH is a 16-port XGS-PON OLT interface board with N1/N2a module, which can be used in the ZTE OLT ZXA10 C600/C650/C680.
Maximum optical split ratio: 1:256
Supports optical power monitoring
Supports the ALS function of optical modules
Supports hot swapping
The GFTH panel
Modules of the GFTH XGS-PON Subscriber Card
Module | Function |
Management and control module | Configures, controls, and manages the card. |
PON MAC module | Implements all the functions on the XGS-PON layer defined by ITU-T G.9807. |
NP module | Implements data processing on the service layer, including service bandwidth and QoS processing based on service types and user needs to meet the SLA requirements. The data processing function complies with TR156. |
Optical module | Provides an XGS-PON optical interface that complies with ITU-T G.9807. |
Clock unit | Processes the system clock in compliance with ITU-T G.8262, G.8264, and G.781. |
The operating Principle of the XGS-PON Subscriber Card GFTH
GFTH Datasheet
Item | GFTH |
Port | 16 |
Type | N1 Module: Single Fiber Bidirectional Optical Module N1
N2a Module: Single Fiber Bidirectional Optical Module N2a |
Operating Wavelength | Tx: 1577 nm, Rx: 1270 nm |
Encapsulation Type | SFP+ |
Port Rate | Tx: 10 Gbit/s, Rx: 10 Gbit/s |
Minimun Output Optical Power | N1 Module: 2dBm
N2a Module: 4dBm |
Maximum Output Optical Power | N1 Module: 5dBm
N2a Module: 7dBm |
Maximum Receiver Sensitivity | N1 Module: -26dBm
N2a Module: -28dBm |
Optical Connector Type | SC/UPC |
Optical Fiber Type | Single-mode |
Reach | 20.00 km |
Saturation optical power | N1 Module: -5dBm
N2a Module: -7dBm |
Extinction ratio | 8.2dBm |
Weight | 1.68kg |
Dimensions (W x D x H) | 393.1 mm(H) × 23.9 mm(W) × 214 mm(D) |
Additional information
Weight | 3.0000 kg |
---|
Abner –
I have been looking for this board before, until I saw it at Telecomate, it really didn’t disappoint me.
Greg –
I got them for a reasonable price. Thanks telecomate.com.